Table of Contents
the device through SSH, you need to log in to the device through the console port and configure the
authentication mode, user level, and common settings.
This section includes these topics:
Configuring the SSH server
•
Configuring the SSH client to log in to the SSH server
•
Configuring the SSH server
Configuration prerequisites
You have logged in to the device, and want to log in to the device through SSH in the future.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see
"Configuration
Configuration procedure
Follow these steps to configure the device that serves as an SSH server:
To do...
Enter system view
Create local key pair(s)
Enable SSH server
Enter one or more VTY user
interface views
Specify the scheme authentication
mode
Enable the current user interface to
support SSH
requirements."
Use the command...
system-view
public-key local create { dsa | rsa }
ssh server enable
user-interface vty first-number
[ last-number ]
authentication-mode scheme
protocol inbound { all | ssh |
telnet }
47
Remarks
—
Required
By default, no local key pair(s) are
created.
Required
By default, SSH server is disabled.
—
Required
By default, authentication mode for
VTY user interfaces is password.
Optional
By default, both telnet and SSH are
supported.
Telnet is not supported in FIPS
mode.
- Quick Links:
- Cli Configuration
- Entering the Cli
Hide quick links:
Table of Contents
