Ip Igmp Snooping Vlan Immediate-Leave - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Chapter 2
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
ip igmp snooping vlan immediate-leave
To enable Internet Group Management Protocol (IGMP) snooping immediate-leave processing on a
per-VLAN basis, use the ip igmp snooping vlan vlan-id immediate-leave command in global
configuration mode.To return to the default setting, use the no form of this command.
Syntax Description
vlan-id
Defaults
IGMP immediate-leave processing is disabled.
Command Modes
Global configuration
Command History
Release
12.2(52)EY
Usage Guidelines
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
You should only configure the Immediate Leave feature when there is a maximum of one receiver on
every port in the VLAN. The configuration is saved in NVRAM.
The Immediate Leave feature is supported only with IGMP Version 2 hosts.
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Examples
This example shows how to enable IGMP immediate-leave processing on VLAN 1:
Switch(config)# ip igmp snooping vlan 1 immediate-leave
Related Commands
Command
ip igmp snooping report-suppression
show ip igmp snooping
show ip igmp snooping groups
show ip igmp snooping mrouter
show ipc detail
OL-28238-01
ip igmp snooping vlan vlan-id immediate-leave
no ip igmp snooping vlan vlan-id immediate-leave
Enable IGMP snooping and the Immediate-Leave feature on the specified
VLAN. The range is 1 to 1001 and 1006 to 4094.
Modification
This command was introduced.
ip igmp snooping vlan immediate-leave
Description
Enables IGMP report suppression.
Displays the snooping configuration.
Displays IGMP snooping multicast information.
Displays the IGMP snooping router ports.
Displays the configuration and operation information for
the IGMP querier configured on a switch.
Cisco ME 3800X and ME 3600X Switch Command Reference
2-113
Table of Contents
