Iscsi Software Initiator Configuration On Esx Server - Dell PowerVault NX1950 Configuration Manual

For vmware esx server software

Hide thumbs Also See for PowerVault NX1950:

Table of Contents

5. iSCSI Software Initiator Configuration on ESX Server

This section lists the steps required to configure the software initiator on the VMware ESX Server.

Connect to the ESX server/VirtualCenter using VI Client, and follow the below steps:

1. Select Configuration->Storage Adapters on the ESX server

2. Select iSCSI software adapter and click on Properties. The iSCSI initiator Properties

window appears.

3. Under the general tab select Configure tab. Select the Enabled checkbox and click OK.

Select Close.

4. Select iSCSI software adapter under storage. You should now see your iSCSI Target

name listed.

Dell Inc.

Figure 3: iSCSI software initiator tab on VI client

Figure 4: iSCSI software initiator properties window