Table of Contents
Getting started
Settings
To stop partway
Press [RETURN
].
To restart setup
1 Press [FUNCTION MENU]. (
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Auto Setup" in "DVB Tuning", then
press [OK].
4 Select "Yes", then press [OK].
• If you are asked to select the auto setup
method, refer to "Auto Setup". (
To confirm that channels have been tuned
correctly
Refer to "Using Channel List". (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
22
SQT0351
Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
1
20)
84)
2
26)
3
Select "Wired" or "Wireless", then press
[OK].
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Select "Wireless".
Wired
Wireless
OK
RETURN
Follow the on-screen instructions and make
the following confirmation and settings.
"Wired" connection:
- Home Network Connection Check
- Home Network function
- Remote Viewing and Recording
- Internet Connection Test
"Wireless" connection:
• Before beginning wireless connection
setup obtain your Network name (SSID).
An SSID (Service Set IDentification) is a
name used by wireless LAN to identify a
particular network. Transmission is
possible if the SSID matches for both
devices.
- Wireless Connection Check
- Home Network Connection Check
- Home Network function
- Remote Viewing and Recording
- Internet Connection Test
When "Easy Network Setting is finished."
appears.
Press [OK].
- Quick Links:
- Operating Instructions
Hide quick links:
Table of Contents
