Company, Division of Matsushita Division of Matsushita Electric of 5770 Ambler Drive, Electric Corporation of America Puerto Rico, Inc. (“PSC”) Mississauga, Ontario One Panasonic Way, Secaucus, Ave. 65 de Infanteria, Km. 9.5 L4W 2T3 New Jersey 07094 San Gabriel Industrial Park, Carolina, www.panasonic.ca http://www.panasonic.com...
Page 2
Moniteur grand écran couleur 7 à écran à cristaux liquides - lecteur de CD intégré en tableau de bord Monitor LCD en color de pantalla ancha de 7" emportrado/Reproductor de CD CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / PLAYER CY-VMC7000U DISC/BAND...
RAIN OR MOISTURE. Display Unit CAUTION: THIS PRODUCT IS A CLASS LASER PRO- DUCT. Model No. CY-VMC7000U N° De Modèle USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT 1 2 V 8Ω...
Page 4
CY-VMC7000U CY-VMC7000U NÚMERO DEL MODELO NUMÉRO DE MODÈLE NÚMERO DE SERIE NUMÉRO DE SÉRIE...
Page 5
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineer- ing, manufactured with carefully selected components and assembled by people who take pride in their work.
Cautions and cable wiring diagram ¢ ¢ Troubleshooting ..................48 Where to get service help, troubleshooting tips, error display messages and reset switch ¢ ¢ Maintenance ....................53 Care of the unit and notes on CD ¢ ¢ Specifications ....................55 CY-VMC7000U...
Do not attempt to disassemble or adjust this precision product. Please refer to the Servicenter list included with this prod- uct for service assistance. For Installation The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. CY-VMC7000U...
Page 8
Caution: Record your registered ID code and keep it in a secure location. If you forget it, you will be unable to use the unit. In case that you can not operate the unit because of forgetting the ID code, please consult your nearest Panasonic Servicenter. ID Code Input Enter the ID code after turning on the power and activating the display.
Components / Remote Control Preparation Components CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / PLAYER DISC/BAND VOLUME NAVIGATION ASPECT ENTER TRACK/ MUTE MENU MODE NAVI YUNE POWER P·MODE 1. Display Unit 2. Control Unit 3. Speaker 4. Remote Control 5. Batteries...
15) CD slot ] (OPEN/CLOSE) Remote control sensor ¡Opens/closes the monitor. page 14) [}] [{] (DISC/BAND) CY-VMC7000U ENTER ¡Selects (vertically) or adjusts IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER an operation or item. []] [[] (TRACK/TUNE) DISC/BAND...
MUTE objects into the unit while the display is moving. Inserting your hands, fingers or foreign objects into MUTE ON : Press [MUTE]. the unit can cause injuries and damage to the unit. MUTE OFF : Press [MUTE] again. CY-VMC7000U...
Raise : Press [TILT] again on the display unit. Note: Even when the unit is power off, you can fold down the display temporarily. Caution: Do not place any object on the display unit, or subject it to undue force. CY-VMC7000U...
CD mode is activated, you will find there is no CD in the compartment.) ¡Loading a CD when the power is off will turn the power on. CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME...
The first 10 seconds of each playing from the beginning. track plays in sequence. Press [5] (SCAN) again to cancel. Press [6] (REPEAT) Repeat Play Repeat the current selection. Press [6] (REPEAT) again to cancel. CY-VMC7000U...
Picture/Sound from Auxiliary Devices Car Navigation CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME NAVIGATION ASPECT TRACK/ ENTER YUNE MUTE MENU MODE MODE NAVI NAVI POWER P·MODE Preparation: [MODE] [NAVI] (NAVIGATION) ¡Connect a car navigation system.
Page 16
Car Navigation OFF : Press [NAVI] (NAVIGATION) again. VTR2-IN VTR1-IN CY-VMC7000U Control Unit Note: When you connect a Panasonic car navigation system with a built-in DVD player, use an RCA cord as well. CY-VMC7000U Display Unit RGB input cord (Example) When you connect a car navigation system to VTR1- Other brand’s car...
Page 17
Picture/Sound from Auxiliary Devices (continued) VCR / Camcorder Preparation: Connect a VCR or Camcorder. page 46) CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND Rear View Camera VOLUME NAVIGATION ASPECT TRACK/ ENTER ENTER YUNE MUTE MENU MENU...
Select the same mode (VTR1 or VTR2) as the terminal that is Camcorder connected to a VCR or Camcorder (VTR1-IN or VTR2-IN). VTR1-IN VTR2-IN CY-VMC7000U Control Unit (Example) Shift the transmission gear into the reverse position. Rear View Camera The display shows a picture from the rear view camera.
Useful Functions CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME NAVIGATION ASPECT TRACK/ ENTER YUNE MUTE MENU MODE NAVI POWER P·MODE [ASP] (ASPECT) Aspect Ratio (for VTR Mode) Default : Normal Mode: 4 types [A] (ASPECT)
Page 20
¡If you expand normal picture (4 to 3) by using “Just”, “Zoom” or “Full” aspect to the full of the screen, you might not see the periphery of the picture, or you might see deformed picture. Therefore, use the “Normal” mode when you see original picture in deference to picture-making purpose. CY-VMC7000U...
Press [}] or [{] to select an item. w Press [ENTER] to set. [MENU] [MODE] [}] [{] CY-VMC7000U CY-VMC7000U []] [[] IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER (Select)
Page 22
Speaker Setting (Output setting of accessory speakers) : Sound does not come out. AUTO : The sound comes out in the same mode as the picture. NAVI : The sound from the Panasonic car navigation system (not available yet) always comes out. CY-VMC7000U...
Press [}] or [{] to select an item. w Press [ENTER] to set. [MENU] [MODE] [}] [{] CY-VMC7000U CY-VMC7000U []] [[] IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER (Select)
Page 24
60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select and Adjust) [ENTER] [MODE] [MENU] [}] [{] CY-VMC7000U []] [[] IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER (Select and Adjust) DISC/BAND VOLUME NAVIGATION ASPECT TRACK/...
Page 25
In case that you can not operate the unit because of forgetting the ID code, please consult your nearest Panasonic Servicenter. Note: Refer to ID Code Input regarding how to enter the ID code.
Page 26
Note: Press [MODE] to return to the regular mode. Enter an ID code by using the remote control. [}] [{] []] [[] (Select) [ENTER] [MODE] [MENU] [ENTER] CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [0] to [9] (ID code input) DISC/BAND VOLUME NAVIGATION ASPECT TRACK/...
Page 27
Button Operation Sound Default : ON Select Select USER etc. Video Control Setting This “Video Control Setting” is required when you connect a Panasonic car navigation sys- tem with a built-in DVD player. (not available yet) Default : VTR1 CY-VMC7000U...
Page 28
: Connected to the VTR1-IN VTR2 : Connected to the VTR2-IN Note: Select a terminal connected to the DVD output terminal of a Panasonic car navigation system with a built-in DVD player (not available yet) through an RCA cord. CY-VMC7000U...
Press [}] or [{] to select an item. w Press [ENTER] to set. [}] [{] [MENU] [MODE] CY-VMC7000U CY-VMC7000U []] [[] IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER (Select)
Page 30
60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select and Adjust) [ENTER] [MODE] [MENU] []] [[] CY-VMC7000U (Select and Adjust) IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [ENTER] DISC/BAND VOLUME NAVIGATION ASPECT TRACK/...
Before you begin installation, look for the items on the right which are packed with your unit. You’ll need a screwdriver and the following: ¡Warranty Card …… Fill this out promptly. ¡Panasonic Servicenter for Service Directory 12 V DC Electrical Side-Cut ……...
Page 33
We strongly recommend that you test the unit rized professional installer for assistance. before making a final installation. You can set the unit on the floor and make tempo- rary connections to test the unit. Use electrical tape to cover all exposed wires. CY-VMC7000U...
Page 34
Be sure to remove the transportation brackets before use (installation). Use Binding-Head Screws (M5 x 6 mm) for installation. Be careful not to lose these Binding-Head Screws. Binding-Head Screws (M5 x 6 mm) Transportation Bracket Display Unit Transportation Bracket Binding-Head Screws (M5 x 6 mm) CY-VMC7000U...
Fix the rear of the unit to the car body by either method (a) or (b) shown at right after fixing Power Connector !6 and Display Unit/Control Unit Connecting Cord !9 . Insert Trim Plate q. After installation reconnect the negative (–) battery terminal. CY-VMC7000U...
Page 36
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car manufacturers, car types and manufacturing year. Please consult your nearest Panasonic Servicenter for details. Select mounting screws according to the hole positions and hole shape of the bracket.
Page 37
Stick Velcro Tape !5 on the carpet and Control Unit mount the control unit on it. Note: Some carpet materials may not be suit- able for this mounting method. In this case, please contact your nearest Panasonic Servicenter for installation. !5 Velcro Tape Carpet Notes: ¡Never mount the control unit in any of the following locations to avoid damage due to overheating:...
Page 38
Push the right and left clamp plates outward, one at a time, and pull the display unit toward yourself. w After removing the right and left clamp plates, pull the unit with both hands till it comes off. Push here to remove the clamp plates. CY-VMC7000U...
¡Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when the battery terminals are disconnected. !9 Display Unit / Control Unit Connecting Cord RGB Input Cord To the RGB Connector of the Panasonic car navigation system (not available yet) Supplied Hardware Item...
Page 40
To the REMOTE-IN terminal Connector Point or Remote Control Signal Receiver Cord of the Connect AV control unit with Leave the cover Panasonic DVD video player receiver (CA-TU7000U). unremoved if you do not connect the AV Control Unit (CA-TU7000U) (Black)
Page 41
Electrical Connections (continued) Example: Connection with DVD Player / Receiver (CQ-DVR909U) and Rear Seat Monitor CY-VMC7000U Display Unit (Rear) !6 Power Connector (R) (Red) PRE OUT Pre-Out Cord RCA Cord !9 Display Unit / Control (Option) (L) (White) Unit Connecting Cord...
Page 42
(R) (Red) AUX-IN AUX Input Cord (L) (White) VTR-OUT Video Output Cord (Video) (Yellow) (R) (Red) FRONT Pre-Out Cord (Front) (L) (White) Power Amplifier Unit (Supplied to CQ-DVR909U) Video Audio Left Right output Rear Seat Monitor (Video) (Yellow) (Red) (White) CY-VMC7000U...
Page 43
Electrical Connections (continued) Connection with VCR or Camcorder Note: Refer to the operating instructions for the connected devices, in addition. CY-VMC7000U Control Unit Audio Video (Front) output Left Right (Red) (Video) (Yellow) (Video) INTELLIGENT SYSTEM POWER (Yellow) (Red) BS G-CODE...
Page 44
Connection with Rear View Camera Note: Refer to the operating instructions for the connected devices, in addition. Video output Rear View Camera Control Unit Camera input (Video) (Yellow) CY-VMC7000U Rear View Camera Display Unit (Rear) !6 Power Connector CY-VMC7000U Control Unit RCA Cord (Option)
Connect the grounding wire to a metal part of your car. Fuse is burnt. Call the store where you purchased the unit, or your nearest Panasonic Servicenter (see the attached sheet) and ask for fuse replacement. The volume is adjusted to zero.
Page 46
¡CD is defective. ¡Mechanical trouble. CD is not ejected. Press [u]. If failure persists, press the reset switch. If normal operation is not restored, call the store where you purchased the unit or the nearest Panasonic Servicenter to ask for repairs. CY-VMC7000U...
Page 47
The picture is whitish. Make every adjustment of the screen. Something is wrong with the picture. The picture is light in color. This is a characteristic of liquid crystal panels and is not a problem. Red, blue, or green spots appears. CY-VMC7000U...
Page 48
Press [u]. If failure persists, press the reset switch. If normal operation −E3− is not restored, call the store where you purchased the unit or the nearest Panasonic Servicenter to ask for repairs. No disc is in the player. NO DISC aInsert disc into the CD slot.
Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician. Replacing the Fuse Use fuses of the same specified rating (5 amps). Using different substitutes or fuses with a higher rating, or connecting the product directly without a fuse, could cause fire or damage to this unit.
NAVIGATION ASPECT ENTER TRACK/ CHANNEL ENTER MUTE MENU MODE NAVI MUTE CHANNEL MENU MODE NAVI POWER POWER Kitchen cleanser diluted with water Caution: If water drops or similar wet substances get inside the monitor, it may cause a malfunction. CY-VMC7000U...
Page 51
¡A CD-RW disc is not playable. ¡MP3 file, video CD, CD-ROM and CD-EX disc are not playable. ¡Be sure to observe the handling instructions of CD-R disc. ¡Do not apply a disc that has a label printed by a commercially available label printer. CY-VMC7000U...
: Internal light (Built-in small fluorescent lamp) CD Player Sampling Frequency : 8 times oversampling DA Converter : MASH•1 bit/4 DAC System Error Correction System : Panasonic Super Decoding Algorithm Pick-Up Type : Astigma 3-beam Light Source : Semiconductor Laser Wave Length : 780 nm Frequency Response : 20 Hz - 20 kHz (±1 dB)