Functional Description - Makita DA3000R Instruction Manual

FUNCTIONAL

DESCRIPTION

1. Switch lever

2. Speed control screw

3. Lock-off lever

1

2

1. Speed control screw

2. Switch lever (paddle switch)

1. Reversing switch knob

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

CAUTION:

•

Before plugging in the tool, always check to see that the switch lever

actuates properly and returns to the "OFF" position when released.

For tool with lock-off lever

004623

To prevent the switch lever from being accidentally squeezed, a lock-off lever

is provided. To start the tool, slide the lock-off lever in the direction of the

arrow and squeeze the switch lever. Tool speed is increased by increasing

pressure on the switch lever. Release the switch lever to stop.

A speed control screw is provided so that maximum tool speed can be limited

(variable).

1

2

3

For tool without lock-off lever

003018

To start the tool, simply squeeze the switch lever. Tool speed is increased by

increasing pressure on the switch lever. Release the switch lever to stop.

A speed control screw is provided so that maximum tool speed can be limited

(variable).

Reversing switch action

For Model DA3000R only

003026

This tool has a reversing switch to change the rotational direction. Turn the

reversing switch knob so that its protrusion will point to

wise (forward) rotation or

CAUTION:

•

The switch lever (paddle switch) cannot be squeezed with the reversing

switch knob positioned halfway between

1

squeezed forcibly, the tool may be damaged.

•

Always check the rotational direction before operation.

•

Use the reversing switch only after the tool comes to a complete stop. It

will damage the tool to change the rotational direction before the tool

stops.

marking for counterclockwise (reverse) rotation.

mark and

marking for clock-

mark. If it is

5