Page 1: Operating Instructions
Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca P PC...
Page 2: Things You Should Know
Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right.
Page 3 Model No.: SDR-H200/SDR-H20/SDR-H18 Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
Page 5 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or...
Page 6 Batteries Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥...
Page 7 -If you see this symbol- Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. ≥...
Page 8: Table Of Contents
Contents Before using Features ... 10 Quick Guide ... 12 Accessories ... 15 Parts identification and handling ... 16 Using the LCD monitor ...19 Using the remote control (SDR-H200) ...19 HDD and SD card ... 21 Concerning the internal HDD and cards that can be used on this unit ...21 Concerning SD cards ...21 HDD handling precautions ...23...
Page 9 Before using with a computer (Windows) ...82 What you can do with a computer ...82 Operating environment...83 Installation (Windows) ... 85 Installing ImageMixer3 for Panasonic ...85 Reading the software help...86 Software uninstallation ...86 Connection and recognition (Windows) ...86 Connection and recognition procedures...86 About the computer display...87...
Page 10: Before Using
Before using Before using Features ∫ Extended recording! You can record the equivalent of approximately twenty-two 8 cm DVD discs on the 30 GB internal HDD. You can also record motion pictures and still pictures on an SD card. ∫ Easy recording! (l 41) No need to search for the recording start position.
Page 11 Before using ∫ Editing scenes! (l 66, 67) You can create an original video (playlist) by collecting together your favorite scenes recorded on the HDD. ∫ Using with a computer! (l 82) If you use the supplied software, you can create a backup DVD of the scenes recorded on this unit with just one button.
Page 12: Quick Guide
Before using Quick Guide ∫ Charging the battery Connect the AC cable to the AC adaptor and the AC outlet. Put the battery on the battery mount by aligning the mark, and then securely plug it in. ∫ Inserting the battery Push the battery against the battery holder and slide it until it clicks.
Page 13: Recording Still Pictures
Insert/remove the SD card into/from the card slot. Securely close the card slot cover. ∫ Recording motion pictures ≥ Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the recording destination and press the joystick.
Page 14 Before using Press the Photoshot button [ take the picture. SDR-H20/SDR-H18: Press the Photoshot button [ ∫ Motion picture playback ≥ Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick.
Page 15: Accessories
1/;: Slide show start/pause. Plays back the previous picture. Plays back the next picture. ∫: Stops the playback and shows the thumbnails. Accessories Check the accessories before using this unit. SD Memory Card (512 MB) (SDR-H200/SDR-H20) RP-SDR512 Battery pack (SDR-H200) CGA-DU12 Battery pack (SDR-H20/SDR-H18)
Page 16: Parts Identification And Handling
Before using SDR-H200: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. www.dtsc.ca.gov/hazardouswaste/perchlorate. Parts identification and handling Lens ≥ Do not attach a conversion lens or a filter to this unit as it will cause vignetting.
Page 17 24 Card slot (l 29) 25 Tripod receptacle (l 18) 26 Battery release lever [BATTERY] (l 25) 29 30 27 LCD monitor (l 19) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
Page 18 Before using Using the lens cover (SDR-H200) For the lens protection, be sure to close the lens cover when not in use. Rotate the lens cover open/close ring. Attaching the lens cap (SDR-H20/ SDR-H18) Attach the lens cap to protect the surface of the lens.
Page 19: Using The Lcd Monitor
Using the LCD monitor You can record the image while viewing it on the LCD monitor. Place your finger on the LCD monitor open part A and pull the LCD monitor out in the direction of the arrow. ≥ It can open up to 90o. Adjust the angle of the LCD monitor as desired.
Page 20: Remote Control Usable Range
Dispose of used batteries according to the manufacturer’s instructions. Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated.
Page 21: Hdd And Sd Card
HDD and SD card This unit can be used for recording motion pictures and still pictures to the internal HDD and an SD card. Concerning the internal HDD and cards that can be used on this unit Internal HDD (Hard Disk Display on the screen Indication in these...
Page 22: Handling Precautions
We recommend using SD cards conforming to Class 2 or higher of the SD Speed Class Rating or the following SD cards made by Panasonic for motion picture recording. (If another kind of SD card is used, the recording may suddenly stop during motion picture recording.)
Page 23: Hdd Handling Precautions
If the HDD fails, the recorded data cannot be repaired. ∫ Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly.
Page 24 Before using ∫ Card access lamp ≥ When this unit accesses the SD card (reading, recording, playback, erasing, etc.), the access lamp lights up. ≥ If the following operations are performed when the access lamp is lit, then the SD card or the recorded data may be damaged or this unit may malfunction.
Page 25: Setup
CHARGE lamp flashes and the charging time will be longer than normal. ≥ Battery charging time (l 26) ≥ We recommend using Panasonic batteries. (l 15, 129) ≥ If you use other batteries, we cannot guarantee the quality of this product.
Page 26: Charging Time And Recordable Time
Setup Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC (77 oF) and the humidity is 60%. If the temperature is higher or lower than 25 oC (77 oF), the charging time will become longer. ∫...
Page 27 ∫ Recordable time ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever, etc. ≥ “2 h 5 min” indicates 2 hours 5 minutes. SDR-H200: Battery model Voltage/ number capacity Supplied battery/...
Page 28: Connecting To The Ac Outlet
Setup Connecting to the AC outlet Connect the AC cable to the AC adaptor and the AC outlet. Connect the DC cable to the AC adaptor. Connect the DC cable to this unit. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit.
Page 29: Inserting/Removing An Sd Card
∫ To turn on the power Open the LCD monitor. The status indicator lights and the power turns ∫ To turn off the power Close the LCD monitor. The status indicator goes off and the power turns off. ≥ The power will not turn off while recording even if the LCD monitor is closed.
Page 30: Selecting A Mode
Setup Securely close the card slot cover. Selecting a mode The mode dial is used to switch between recording and playback modes. Rotate the mode dial slowly but surely. Rotate the mode dial, and set the desired mode pictograph to the position shown in the illustration.
Page 31 Move the joystick up, left or right to select an item. Operations during playback ¬ Rotate the mode dial to select Move the joystick up, down, left or right to select the scene to be played back and press the joystick.
Page 32 Setup About the operation icons displayed in each mode About auto mode and manual mode (l 40) Video recording mode 1/2 NEXT 1/2 1/2 NEXT NEXT 2/2 2/2 NEXT 2/2 NEXT NEXT Icon (1/2) (2/2) In manual mode (3/3) In manual focus mode (4/4) ≥...
Page 33 Picture recording mode 1/2 NEXT 1/2 1/2 NEXT NEXT 2/2 NEXT 2/2 2/2 NEXT NEXT Icon Ø (1/2) (2/2) In manual mode (3/3) In manual focus mode (4/4) Picture playback mode Icon Direction Slide show start/pause Stop playback and show thumbnails ∫...
Page 34: Switching The Language
Setup ∫ Help mode The help mode explains the operation icons that are displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in video/picture recording mode. ¬ Rotate the mode dial to select Press the joystick to display the icon during the recording pause. Move the joystick right to select Move the joystick up, left or right to select the desired icon.
Page 35 ≥ Do not switch the mode dial when the menu is displayed. Move the joystick up or down in order to select the desired top menu. Move the joystick right or press the joystick. Move the joystick up or down in order to select the submenu item.
Page 36: Setting Date And Time
Setup Select a menu item. MENU ENTER ≥ Use the direction buttons (3,4,2,1) and ENTER button in place of the joystick on the main unit. Press the MENU button to exit the menu screen. MENU ENTER Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Page 37: Adjusting The Lcd Monitor
Display style Screen display [Y/M/D] 2007.DEC.15 [M/D/Y] DEC.15.2007 [D/M/Y] 15.DEC.2007 ≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [- -], the built-in lithium battery has run down.
Page 38 Setup Each time you press the button: 1 Original brightness 2 Bright 3 Brighter 4 Darker 5 Dark ≥ This will not affect the images to be recorded. ≥ If you turn on the unit when the AC adaptor is used, this function will automatically be “Bright”.
Page 39: Recording
Before recording Recording Basic camera positioning 1 Hold the camera with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs. ≥...
Page 40 Recording ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically. jAuto white balance (l 121) jAuto focusing (l 122) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for optimum brightness.
Page 41: Recording Motion Pictures
Recording motion pictures This unit can be used for recording motion pictures to the internal HDD and an SD card. (l 21) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording motion pictures will appear.
Page 42 Recording To end the recording Press the recording start/stop button again to pause recording. ≥ [¥] and [;] are red during recording. Do not move this unit until [;] is green. The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.
Page 43: Recording Modes And Recordable Time Available For The Motion Picture
Recording modes and recordable time available for the motion picture Changing the recording mode of the motion picture. Press the MENU button, then select [BASIC] # [REC MODE] # desired item and press the joystick. ≥ The recordable time shown in the table are approximations. ∫...
Page 44: Recording Still Pictures
Recording Recording still pictures This unit can be used for recording still pictures to the internal HDD and an SD card. (l 21) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording still pictures will appear.
Page 45 A Focus indication ± (The white lamp flashes.): ¥ (The green lamp lights up.): When in focus No mark: ≥ The focus indication is indicated as follows when the Photoshot button [ ] is not pressed halfway. Please use it as a guide for recording.
Page 46 Recording Screen indications in picture recording mode A Size of still pictures B Selected recording destination C Remaining number of still pictures (Flashes in red when [R 0] appears.) D Quality of still pictures ∫ About the focus indication (SDR-H200) ≥...
Page 47: Number Of Pixels And Picture Quality For Still Picture Recording
Number of pixels and picture quality for still picture recording ∫ [PICTURE SIZE] Changing the recording size. Press the MENU button, then select [BASIC] # [PICTURE SIZE] # desired item and press the joystick. SDR-H200: Icon Aspect 16:9 SDR-H20/SDR-H18: Icon Aspect 16:9 ≥...
Page 48: Various Recording Functions
Recording Various recording functions Zoom in/out function SDR-H200: You can zoom in up to 10k optically. SDR-H20/SDR-H18: You can zoom in up to 32k optically. ¬ Rotate the mode dial to select Move the zoom lever. T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥...
Page 49: Recording Yourself
≥ This function cannot be used in picture recording mode. To use the zoom microphone function The zoom microphone is linked to the zooming operation so that far-away sounds with a tele- shot and close-up sounds with a wide-angle shot are recorded more clearly.
Page 50: Backlight Compensation Function
Recording ≥ Video recording mode ≥ Picture recording mode ≥ The subject should be within 1.3 m (4.2 feet) of the unit. ≥ Using the video light reduces battery time. ≥ Set the video light to off when not in use. ≥...
Page 51: Soft Skin Mode
Move the joystick left to select Press the recording start/stop button. Start recording. (Fade in) When you start recording, the image/audio gradually appears. Pause recording. (Fade out) The image/audio gradually disappears. After the image/audio completely disappears, recording stops. ≥ After recording, the fade setting is canceled. To cancel fading Select [ ] again.
Page 52: Tele Macro Function (Sdr-H200)
Recording ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ You may not be able to see the face clearly when recording a distant person.
Page 53: Self-Timer Recording
To cancel the MagicPix function Select [ ] again. ≥ The MagicPix function makes the signal charging time of CCD up to approximately 30k longer than usual, so that dark scenes can be recorded brightly. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.
Page 54: Wide Mode
Recording Wide mode This is for selecting the screen’s aspect ratio when recording motion pictures. This allows you to record images compatible with wide-screen TVs (16:9) and regular TVs (4:3). ∫ Recording images with a 16:9 aspect ratio ¬ Rotate the mode dial to select Press the MENU button, then select [BASIC] >...
Page 55: Manual Recording Functions
Press the MENU button, then select [ADVANCED] # [WIND CUT] # [ON] and press the joystick. To cancel the wind noise reduction function Press the MENU button, then select [ADVANCED] # [WIND CUT] # [OFF] and press the joystick. ≥ This function’s default setting is [ON]. ≥...
Page 56: Manual Focus Adjustment
Recording ≥ During normal playback, the image movement may not look smooth. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change. ≥ If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear.
Page 57 Set the AUTO/MANUAL/FOCUS switch to MANUAL. The icon shown in the illustration is displayed automatically. Move the joystick up to select Move the joystick left or right to select the white balance mode. ] Auto white balance adjustment Indoor mode (for recording under incandescent lamps) ≥...
Page 58: Manual Shutter Speed/ Aperture Adjustment
Recording will temporarily be black. (The black balance cannot be adjusted manually.) 1 Black balance adjustment in progress. (Flashes.) 2 White balance adjustment in progress. (Flashes.) 3 Adjustment completed. (Lights up.) ≥ (SDR-H200) When the unit is turned on with the lens cover closed, the automatic white balance adjustment may not function properly.
Page 59 ≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. ∫ Manual shutter speed adjustment ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change.
Page 60: Playback
Playback Motion picture playback Playback Play back the motion pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick.
Page 61 ≥ When the amount of time recorded on the scene is short, playback may not be possible. ≥ When a scene is displayed as [ ≥ The power will not turn off when the LCD monitor is closed. ≥ When playing back motion pictures recorded on an SD card with other products on this unit or playing back motion pictures recorded on an SD card with this unit on other products, the picture quality may deteriorate and they may be unplayable.
Page 62: Playing Back Motion Pictures By Date
Playback Move the joystick up during playback to pause the playback. Move the joystick right. (The frames will be advanced one at a time in the reverse direction when you move the joystick left.) ≥ Normal playback is restored when you move the joystick up. ∫...
Page 63: Resuming The Previous Playback
≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. (When playing back motion pictures on the HDD only) Move the joystick left or right to select the month. Move the joystick up or down to select the date for playback, then press the joystick.
Page 64: Still Picture Playback
Playback Still picture playback Play back the still pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick.
Page 65 ≥ The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥ If a non-standard file is played back, the folder/file number may not be displayed. ≥ This unit may degrade or not play back data recorded or created on another product and another product may degrade or not play back data recorded on this unit.
Page 66: Editing
Editing Editing Editing scenes Deleting scenes This is for deleting motion picture scenes. The deleted scenes cannot be restored. Deleting scenes one at a time ¬ Rotate the mode dial to select ¬ Select [HDD] or [SD CARD] in [MEDIA SELECT].
Page 67: Locking Motion Picture Scenes
To cancel deleting halfway Press the MENU button. ≥ Scenes are deleted from the last scene on the thumbnail display. The scenes that have already been deleted when the deletion is canceled cannot be restored. To complete editing Press the MENU button. ≥...
Page 68: Creating A New Playlist
Editing ≥ If you create or delete playlists, the original scenes will not be modified. Editing scenes on a playlist will not affect the original scenes. A Recorded scenes B Playlist ≥ You can create a playlist on the HDD only. You cannot create a playlist on an SD card.
Page 69: Playing Back A Playlist
Playing back a playlist ¬ Rotate the mode dial to select ¬ Select [HDD] in [MEDIA SELECT]. Press the MENU button, then select [PLAY SETUP] # [PLAYLIST] # [VIEW LIST] and press the joystick. Select the playlist to be played back, then press the joystick.
Page 70 Editing The thumbnail view screen of the playlist that scenes were added to is displayed. To continue adding scenes to the playlist Repeat steps 1-4. Moving scenes The scenes in a playlist can be moved. ¬ Select playlist playback mode. (l 69, “Playing back a playlist”, steps 1 and Press the MENU button, then select [EDIT] # [MOVE] # [YES]...
Page 71: Editing Still Pictures
Select [ALL] or [SELECT] and press the joystick. ≥ When [ALL] is selected, the selected playlist will be erased. Proceed to step 5. (Only when [SELECT] is selected in step 2) Select the scene to be deleted, then press the joystick. The selected scene is encircled by a red frame.
Page 72: Locking Still Picture Files
Editing Press the button in the thumbnail display. Select [ALL] or [SELECT] and press the joystick. ≥ When [ALL] is selected, all files on the medium except the locked files will be erased. Proceed to step 5. (Only when [SELECT] is selected in step 2) Select the file to be deleted, then press the joystick.
Page 73: Dpof Setting
Press the MENU button, then select [PICT. SETUP] # [LOCK SET] # [YES] and press the joystick. Select the file to be protected, then press the joystick. ] display appears and the selected file is locked. ≥ Press the joystick again to release the lock setting.
Page 74: Copying Still Picture Files
Editing ≥ The DPOF setting can be established for up to 999 files. ≥ DPOF setting made on other devices may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥ You cannot add the recording date to pictures to be printed with the DPOF settings.
Page 75: Hdd And Card Management
HDD management HDD and card management Formatting HDD This is for initializing HDD. Please be aware that if the HDD is formatted, then all the data recorded on the HDD will be erased. Store important data on a computer, etc. ¬...
Page 76 HDD and card management When the confirmation message appears, select [YES], then press the joystick. ≥ When formatting is complete, press the MENU button to exit the message screen. ≥ Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use...
Page 77: With Other Products
With a TV With other products Playback on TV The motion pictures and still pictures recorded by this unit can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down. Connect this unit and a TV.
Page 78: With A Dvd Recorder
With other products Example of images with a 16:9 aspect ratio on a regular TV (4:3) [TV ASPECT] setting [16:9] ≥ This function’s default setting is [16:9]. ∫ To display the on-screen information on the TV (SDR-H200) The information displayed on the screen (operation icon and time code, etc.) can be displayed on the TV.
Page 79: With A Printer (Pictbridge)
Connect this unit and a video device. S VIDEO IN VIDEO IN AUDIO IN A AV/S cable (supplied) ≥ Insert the plugs as far as they will go. * If the video device has an S Video terminal, also connect the S Video plug into it. This allows you to enjoy more beautiful pictures.
Page 80 With other products Select a file to be printed, then press the joystick. The number of pictures set is displayed. Move the joystick up or down to select the desired number of prints, then press the joystick. ≥ You can set up to 9 prints. ≥...
Page 81 ≥ You may not be able to print still pictures recorded with other products. ≥ When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥ Connect the printer directly to this unit. Do not use a USB hub.
Page 82: With A Computer
Before using with a computer (Windows) What you can do with a computer When you have installed ImageMixer3 for Panasonic from the supplied CD-ROM and connected your computer to the unit, you can perform the operations described below. A You can play back the images recorded by this unit on your computer or import the images to your computer.
Page 83: Operating Environment
Languages English, French and Spanish supported ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used. ≥ Operation on an OS other than the one pre-installed is not guaranteed.
Page 84: Usable Discs
≥ Use discs made by a trustworthy manufacturer. It may not be possible to record images properly if you use low-quality discs. For technical inquiries about this software, contact the PIXELA Customer Support Center in your region. U.S. and Canada (Toll-Free) +1-800-458-4029 Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website is in English only.) LSQT1190 Function For creating discs (DVD-Video format)/ DVD COPY ¥...
Page 85: Installation (Windows)
≥ Do not perform any other operations on your computer while the software is being installed. Installing ImageMixer3 for Panasonic Insert the CD-ROM into the computer. The setup language selection screen appears. ≥ If the setup language selection screen does not appear, double-click the CD-ROM drive icon in [My Computer].
Page 86: Reading The Software Help
With a computer The computer must be rebooted for the application to work. ≥ Depending on the operating environment, you may be required to install DirectX 9.0c. If so, click [Yes], and install it. If you install the software in a computer that is not compatible with DirectX 9.0c, the computer may not work properly.
Page 87: About The Computer Display
Connect this unit and a computer. A USB cable (supplied) ≥ Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully. ≥ Do not use any other USB cables except the supplied one.
Page 88: To Disconnect Usb Cable Safely
With a computer SD card ≥ SD-Video format motion pictures are stored in the [PRG¢¢¢] folder. (“¢¢¢” denotes base-16 (hexadecimal) characters from 001 to FFF.) ≥ Up to 99 files can be recorded in the [PRG¢¢¢] folder. ≥ JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder.
Page 89: Playing Back And Importing Images
DVD disc, they will be copied onto the DVD disc again when a different user account is used. ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. Playing back and importing images ¬...
Page 90 If ImageMixer3 fails to start automatically, take the following steps to start it. Select [start] # [All Programs (Programs)] # [PIXELA] # [ImageMixer3 for Panasonic] # [ImageMixer3 for Panasonic]. Click [Playback/Import Video]. LSQT1190 The browser screen is displayed. Select [SDR-H200]/[SDR-H20]/ [SDR-H18] (HDD) or [Removable Disk] (SD card) in [Source].
Page 91: Creating Dvd-Video Discs With The Selected Images
If ImageMixer3 fails to start automatically, take the following steps to start it. Select [start] # [All Programs (Programs)] # [PIXELA] # [ImageMixer3 for Panasonic] # [ImageMixer3 for Panasonic]. Click [Create DVD-Video]. Click [Create New DVD]. Select the appropriate project settings and click [OK].
Page 92 ≥ When writing to the disc is finished, the disc will be ejected from the drive. ≥ Depending on the amount of data, writing to the disc may take time. ≥ You cannot use a Panasonic DVD Video Camera as a device for writing.
Page 93: Before Using With A Computer (Macintosh)
Before using with a computer (Macintosh) What you can do with a computer When you have installed ImageMixer3 for Panasonic from the supplied CD-ROM and connected your computer to the unit, you can perform the operations described below. A You can play back the images recorded in this unit on your computer or import the images to your computer.
Page 94: Operating Environment
English, French and Spanish supported ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. ≥ A drive that supports recordable discs is required to create a DVD-Video disc. ≥ Dual/double layer discs are not supported.
Page 95 ≥ Use discs made by a trustworthy manufacturer. It may not be possible to record images properly if you use low-quality discs. For technical inquiries about this software, contact the PIXELA Customer Support Center in your region. U.S. and Canada (Toll-Free) +1-800-458-4029 Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website is in English only.) Function ¥ ¥ j:Cannot be used.
Page 96: Installation (Macintosh)
≥ Do not perform any other operations on your computer while the software is being installed. Insert the CD-ROM into the computer. [PANASONIC] CD-ROM icon appears. Double-click [PANASONIC] # [ImageMixer3 for Panasonic.pkg]. The installer setup screen appears.
Page 97: Connection And Recognition (Macintosh)
Connection and recognition (Macintosh) Connection and recognition procedures After the software is installed, the unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the software. ≥ If the supplied CD-ROM is inserted in the computer, remove it.
Page 98: To Disconnect Usb Cable Safely
With a computer ∫ Example folder structure SD card ≥ SD-Video format motion pictures are stored in the [PRG¢¢¢] folder. (“¢¢¢” denotes base-16 (hexadecimal) characters from 001 to FFF.) ≥ Up to 99 files can be recorded in the [PRG¢¢¢] folder. ≥...
Page 99 [SD CARD] and press the joystick. This unit is automatically recognized by the computer. (On the computer) Double-click the [ImageMixer3 for Panasonic] icon in the [ImageMixer3 for Panasonic] folder you installed. ImageMixer3 starts. Select [SDR-H200]/[SDR-H20]/ [SDR-H18] (HDD) or [Removable Disk] (SD card) in [Source].
Page 100: Using The Still Picture Files On A Computer (Macintosh)
≥ You can change the location where imported images will be saved by selecting from the Menu Bar [ImageMixer3] # [Preferences] # [Library destination settings:]. ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. LSQT1190 Using the still picture files...
Page 101 The folders on the HDD or SD card are displayed. Select the file you want to copy from the [100CDPFP] folder in the [DCIM] folder and drag and drop it to the copy destination folder. With a computer LSQT1190...
Page 102: Others
Others Others Menus Menu list Motion picture recording menus ∫ [BASIC] [SCENE MODE] (l 55) [GUIDE LINES] (l 53) [REC MODE] (l 43) [ASPECT] (l 54) [CLOCK SET] (l 36) ∫ [ADVANCED] [D.ZOOM] (l 48) [O.I.S.] (l 54) [FADE COLOR] (l 51) [WIND CUT] (l 54) [ZOOM MIC] (l 49) ∫...
Page 103: Other Menus
[RESUME PLAY] (l 63) [LOCK SET] (l 67) [PLAYLIST] (l 68, 69) ∫ [MEDIA SELECT] [HDD] (l 60) [SD CARD] (l 60) ∫ [SETUP] [DISPLAY] (l 103) [DATE/TIME] (l 36) [DATE FORMAT] (l 36) [FORMAT CARD] (l 75) [POWER SAVE] (l 103) [BEEP SOUND] (l 104) [LCD SET] (l 37) [TV ASPECT] (l 77)
Page 104 Others ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor jWhen connecting the unit to a computer or printer via the USB cable ∫ [BEEP SOUND] ≥...
Page 105: Indications
Indications Indications ∫ Media indications HDD is selected SD card is selected ∫ Recording indications Motion picture recording 0h00m00s R 12h45m 1/100 OPEN DEC.15.2007 3:30 PM Still picture recording R 10000 MEGA 1/100 OPEN DEC.15.2007 3:30 PM Remaining battery power R 0h00m Remaining time for recording 0h00m00s...
Page 106: Playback Indications
Others ∫ Playback indications Motion picture playback Still picture playback Playback Pause Fast forward/rewind Last/first scene paused Skip playback Slow motion playback Frame-by-frame playback ;1/2; 0h00m00s Motion picture playback time Play mode All scenes on the media displayed Scenes recorded on the selected date displayed Scenes in the selected playlist displayed...
Page 107: Messages
SD card. ≥ When using any other card Use a Panasonic SD card or another SD card which can be used to record motion pictures. (l 22) The AGS function is activated. (l 40)
Page 108: About Recovery
Others CHANGE TO MANUAL MODE. CANCEL MAGICPIX MODE. TURN OFF THE VIDEO LIGHT. SHAKE OR DROP HAS BEEN DETECTED. FAILED OPERATION. PLEASE WAIT A WHILE. CANNOT OPERATE. TEMPERATURE IS HIGH. PLEASE TURN OFF AND WAIT A WHILE. CANNOT OPERATE DUE TO LOW TEMPERATURE.
Page 109: Functions That Cannot Be Used Simultaneously
Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions. Functions Digital zoom Fade MagicPix Backlight compensation Soft skin mode (Set and cancel) Tele macro (Set and cancel) Help mode...
Page 110: Frequently Asked Questions
Others Frequently asked questions What kind of cards can be used on this unit? SD Memory Cards and SDHC Memory Cards can be used. (l 21) Can motion pictures be recorded on an SD card? Yes, they can be recorded. To record motion pictures, we recommend using SD cards from 256 MB to 4 GB that conform to Class 2 or higher of the SD Speed Class Rating.
Page 111 Can I write data from a computer onto the unit’s HDD or SD card? No, you cannot. This unit’s USB terminal is read only. Is playback possible on a computer? (Windows) Use ImageMixer3. Is editing possible on a computer? (Windows) Use ImageMixer3.
Page 112 Others Is editing possible on a computer (Macintosh)? Use ImageMixer3. ≥ Motion pictures that have been saved to the ImageMixer3 library can be edited. Is it possible to save data to a computer (Macintosh)? Motion pictures: Use ImageMixer3. Still pictures: Copy with the Finder.
Page 113: Troubleshooting
Troubleshooting Problem This unit cannot be turned on. This unit is turned off automatically. This unit does not stay on long enough. A clicking sound is heard when the power is turned off. Battery runs down quickly. This unit cannot be operated though it is turned on.
Page 114 Others Problem The remote control does not function. A function indication such as the remaining time indication or the elapsed time indication is not shown. Recording does not start although power is supplied to this unit. Recording starts but stops immediately. The playback picture breaks up for a moment.
Page 115 Problem Recorded still pictures are not clear. Auto focus function does not work. “OPEN LENS COVER.” is displayed. Sound is not played back from the built-in speaker of this unit. Although this unit is correctly connected to a TV, playback images cannot be seen.
Page 116 Others Problem The indication disappears. The screen is frozen. No operation can be performed. “PUSH THE RESET SWITCH.” is displayed. If the SD card is inserted in this unit, it is not recognized. If the SD card is inserted in another device, it is not recognized.
Page 117 ≥ To create DVD-Video discs using the DVD COPY function, you need to install ImageMixer3 for Panasonic from the supplied CD-ROM to your computer. (l 85) ≥ The DVD COPY function cannot be used in the video recording mode or picture recording mode.
Page 118 Others With a computer (Macintosh) Problem Even if connected by the USB cable, this unit is not recognized by the computer. An image that should have been recorded does not appear when ImageMixer3 is started. When the USB cable is disconnected, an error message will appear on the computer.
Page 119: Cautions For Use
Cautions for use About this unit ≥ The unit and card become warm after long operation, but this is not a malfunction. Keep the SD Card/Hard Disk Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).
Page 120: About The Battery
Others ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls.
Page 121: Explanation Of Terms
≥ During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. When inserting or removing the SD card, always set the OFF/ON switch to OFF. While this unit accesses the SD card (while is being displayed/the access lamp is lit), do not open the card slot cover and remove the SD card, operate the mode dial,...
Page 122: Auto Focus
Others This is called automatic white balance adjustment. However, since the unit only stores white color information under certain light sources, automatic white balance adjustment does not function normally under other light sources. 10 000K 9 000K 8 000K 7 000K 6 000K 5 000K 4 000K...
Page 123 Others recorded. The focus may become blurry when recording subjects at the beach, at night views or in scenes involving fireworks or special lights. Recording a subject in dark surroundings The unit cannot focus correctly because the light information that comes through the lens decreases considerably.
Page 124: Specifications
Others Specifications SD Card/Hard Disk Video Camera Information for your safety Power source: Power consumption: Signal system Recording format Image sensor Lens Zoom Monitor Microphone Speaker Standard illumination Minimum required illumination LSQT1190 DC 7.9 V/7.2 V Recording 5.7 W (SDR-H200)/4.4 W (SDR-H20/SDR-H18) EIA Standard: 525 lines, 60 fields NTSC color signal SD card: Based on the SD-Video standard HDD: Independent standard...
Page 125 Video output level S Video output level Audio output level (Line) Dimensions (excluding the projecting parts) Mass (without battery and lens cap) Operating temperature Operating humidity Operating altitude Motion pictures Recording media Compression Recording mode and transfer rate Recordable time Audio compression Maximum number of recordable folders and...
Page 126 Others Still pictures Recording media Compression Picture size Number of recordable pictures * The 30 GB hard drive utilizes a portion of the storage space for formatting, file management and other purposes. 30 GB is 30,000,000,000 bytes. Usable capacity will be less. AC adaptor Information for your safety Power source:...
Page 127: Number Of Recordable Pictures On The Hdd Or An Sd Card
Number of recordable pictures on the HDD or an SD card SDR-H200: Picture size Picture quality 30 GB [HDD] 8 MB 16 MB 32 MB 64 MB 128 MB [SD] 256 MB 512 MB 1 GB 2 GB 4 GB Picture size Picture quality 30 GB...
Page 128 Others SDR-H20/SDR-H18: Picture size Picture quality 30 GB [HDD] 8 MB 16 MB 32 MB 64 MB 128 MB [SD] 256 MB 512 MB 1 GB 2 GB 4 GB ≥ The number of recordable pictures depends on whether [ subject being recorded.
Page 129: Optional Accessories
Optional accessories Accessory No. PV-DAC14 CGR-DU06A/1B* (SDR-H20/SDR-H18) CGA-DU12A/1B* CGA-DU21A/1B* RP-SDR04GU1K RP-SDR02GU1A RP-SDR01GU1A RP-SDR512U1A RP-SDR256U1A RP-SDK02GU1A RP-SDH01GU1A RP-SDK512U1A RP-SDH256U1A RP-SDV04GU1K RP-SDV02GU1A RP-SDV01GU1A * Please refer to page 26 concerning the battery charging time and available recording time. NOTE: Accessories and/or model numbers may vary by country. Please consult your local dealer.
Page 130: Accessory Order Form (For Usa Customers)
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY 20421 84th Avenue South Kent, WA. 98032 In CANADA, please contact your local Panasonic dealer for more information on Accessories. LSQT1190 P rice Each Quantity Your State &...
Page 131: Request For Service Notice (Usa Only)
Request for Service Notice: Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Camera and Digital Service Center • Please include your proof of purchase. (Failure to do so will delay your repair.) •...
Page 132: Limited Warranty (For Usa Customers)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished...
Page 133: Customer Services Directory
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: [email protected]...
Page 134: (For Canadian Customers)
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Page 135 Others LSQT1190...
Page 136 Others LSQT1190...
Page 137 Others LSQT1190...
Page 138: Index
Others Others Index ∫ A AC adaptor ....25, 28, 120 Aperture ......58 Auto focus .
Page 139 Others ∫ V Video light ......49 Volume adjustment ....62 ∫...
Page 140: Spanish Quick Use Guide/Guía Española Para El Uso Rápido
Others Spanish Quick Use Guide/ Others Guía española para el uso rápido ∫ Carga de la batería Conecte el cable eléctrico de CA al adaptador de CA y a la toma de la red de Meta la batería en el respectivo soporte alineando la marca, luego encájela.
Page 141 Inserte/quite la tarjeta SD en/de la ranura de la tarjeta. Cierre firmemente la tapa de la ranura de la tarjeta. ∫ Grabación de imágenes dinámicas ≥ Gire el selector de modo para seleccionar Pulse el botón MENU, después seleccione [SELEC MEDIO] # [HDD] o [TARJETA SD] para seleccionar el destino de grabación y pulse el joystick.
Page 142 Others SDR-H200: Pulse el botón de toma fotográfica [ medias para enfocar al sujeto. (Solo en el modo de enfoque automático) Pulse completamente el botón de toma fotográfica [ ] para tomar la foto. SDR-H20/SDR-H18: Pulse el botón de toma fotográfica [ ∫...
Page 143 Seleccione el archivo a ser reproducido. Pulse el joystick. Mueva el joystick para obrar. 1/;: La exposición de diapositivas inicia/se interrumpe. Reproduce la imagen anterior. Reproduce la imagen siguiente. ∫: Detiene la reproducción y muestra las miniaturas. Others LSQT1190...
Page 144 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3...

This manual is also suitable for:

Palmcorder sdr-h18 Palmcorder sdr-h200 Sdr h18 - 30gb hard disk drive camcorder Sdr h200 - 30gb 3ccd hard disk drive/sd palmcorder Palmcorder sdr-h20

Panasonic SD/HDD SDR-H20 Operating Instructions Manual

Before Using

Features

Quick Guide

Accessories

Parts Identification and Handling

HDD and SD Card

Setup

Power Supply

Inserting/Removing an SD Card

Selecting a Mode

How to Use the Joystick

Switching the Language

Using the Menu Screen

Setting Date and Time

Adjusting the LCD Monitor

Recording

Before Recording

Recording Motion Pictures

Recording Still Pictures

Various Recording Functions

Manual Recording Functions

Playback

Motion Picture Playback

Still Picture Playback

Editing

Editing Scenes

Using Playlists

Editing Still Pictures

HDD and Card Management

HDD Management

Card Management

With Other Products

With a TV

With a VCR

With a DVD Recorder

With a Printer (Pictbridge)

With a Computer

Before Using with a Computer (Windows)

Installation (Windows)

Connection and Recognition (Windows)

Using the Recorded Images on a Computer (Windows)

Before Using with a Computer (Macintosh)

Installation (Macintosh)

Connection and Recognition (Macintosh)

Using the Motion Picture Scenes on a Computer (Macintosh)

Using the Still Picture Files on a Computer (Macintosh)

Others

Menus

Indications

Functions that Cannot be Used Simultaneously

Frequently Asked Questions

Troubleshooting

Cautions for Use

Explanation of Terms

Specifications

Optional Accessories

Request for Service Notice (USA Only)

Limited Warranty (for USA Customers)

Customer Services Directory

Warranty

(For Canadian Customers)

Index

Spanish Quick Use Guide/Guía Española para el Uso Rápido

Quick Links

Operating Instructions

Related Manuals for Panasonic SD/HDD SDR-H20

Summary of Contents for Panasonic SD/HDD SDR-H20