Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch FLEXIDOME IP NIN-70122
Summary of Contents for Bosch FLEXIDOME IP NIN-70122
- Page 1 FLEXIDOME IP panoramic 7000 MP NIN-70122 Installation Manual...
-
Page 3: Table Of Contents
Mounting with a Surface Mount Box Wall mount Removing the camera Network connection Network (and PoE power) Configuration Browser connection 7.1.1 Establishing the connection 7.1.2 Protected network Bosch Video Client Video Security Client Troubleshooting LED status overview Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... - Page 4 | Table of Contents panoramic 7000 MP Resolving problems Testing the network connection Customer service Maintenance Cleaning 9.1.1 Lens cleaning Repair Reset Decommissioning 10.1 Transfer 10.2 Disposal Technical data 11.1 Specifications 11.2 Dimensions 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
-
Page 5: Safety
Safety precautions Caution! Installation should only be performed by qualified service personnel in accordance with the National Electrical Code (NEC 800 CEC Section 60) or applicable local codes. Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 6: Important Safety Instructions
Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. 10. Protect all connection cables from possible damage, particularly at connection points. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... -
Page 7: Fcc And Ices Compliance
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 8: Notices
Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information. -
Page 9: Short Information
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com http://www.boschsecurity.com/catalog_overview.htm Bosch Security Systems... -
Page 10: System Overview
Power for the camera is supplied via a Power-over-Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... -
Page 11: Application Variants
Refer to the software manual for more information on the browser interface. Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 12: Operation With External Systems
The camera recording and storage functions include local alarm recording and recording to iSCSI-based systems. The camera can also use the Bosch Video Recording Manager (VRM) to control recording and storage. Integration with the many Bosch recording solutions is seamless. -
Page 13: Larger Surveillance Systems
The Bosch Video Management System is a unique enterprise IP video surveillance solution that provides seamless management of digital video, audio and data across any IP network. It is designed to work with Bosch security products as part of a total video surveillance management system. Third-party integration Third-party integrators can easily access the internal feature set of the camera for integration into large projects. -
Page 14: Planning
Verify that all parts are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packaging is the safest container in which to transport the unit and can be used if returning the unit for service. -
Page 15: System Requirements
Internet Explorer version 11 or later – or – Application software, for example, Video Security Client, Bosch Video Client or Bosch Video Management System. Notice! Megapixel cameras can generate high bitrate streams. Ensure that your network can handle high volume traffic and that you use a powerful, high performance computer. -
Page 16: Installation
(push straight, do not wobble). Slide the memory card into the slot until it latches into place. Turn the locking screw counterclockwise to lock the card into place. Push SD card 1.5 mm 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... -
Page 17: Ceiling Mount
121 (4.77) M4 x 14 133 (5.25) 4.5 x 40 Note: If using a recessed 4s mounting box, attach the mounting ring using two screws and the supplied washers (M4 x 14). Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... - Page 18 Insert the Ethernet cable into the RJ45 connector on the back of the camera. Mount the slots on the back of the camera onto the studs of the mounting ring. Rotate the camera body clockwise until it clicks into place. RJ45 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
-
Page 19: Mounting With A Surface Mount Box
Use the four screws (M5) to attach the mounting ring to the SMB. Attach the camera body to the mounting ring as described above. 9.5 mm (0.375 in) 4.5 x 4 (x3) Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 20: Wall Mount
(Use the slots as a reference.) – When attaching the mounting ring, ensure that the N is at the top. – When attaching the camera body, ensure that the Bosch logo is at the top. 0° 270° 90° 180°... -
Page 21: Removing The Camera
Push a small object (for example, the 1.5 Allen key) into the opening above the access flaps to open them (push straight, do not wobble). Using the T10 Allen key, turn each mounting screw four full turns counterclockwise to loosen them. Push Push Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... - Page 22 FLEXIDOME IP en | Installation panoramic 7000 MP Remove camera Turn the camera counterclockwise to disconnect it from the mounting ring. Disconnect the Ethernet cable and remove the camera. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
- Page 23 It is important to reset the mounting screws to ensure correct remounting of the camera. Using the T10 Allen key, turn each mounting screw four full turns clockwise to tighten them (this resets the mounting clips). Close the flaps. Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684...
-
Page 24: Network Connection
Use STP Category 5e cable with RJ45 connectors (the camera network socket is Auto MDIX compliant). – Power is supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet standard. Notice! Use only PoE approved devices. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... -
Page 25: Configuration
IP Helper The IP Helper tool is a free PC application that makes it easy to detect Bosch cameras and devices on your network. 7.1.2 Protected network If a RADIUS server is used for network access control (802.1x authentication), the unit must be configured first. -
Page 26: Bosch Video Client
FLEXIDOME IP en | Configuration panoramic 7000 MP Bosch Video Client The Bosch Video Client is a free Windows application to view, operate, control, and administer surveillance cameras. It can be downloaded from: http://downloadstore.boschsecurity.com/ The Configuration Manager, which is part of the Video Client, is a useful tool for locating the IP addresses of cameras in your network. -
Page 27: Troubleshooting
The camera has four LEDs that are visible when the side flap is opened: – Two LEDs (green and red) indicate the camera status – Two LEDs (green and orange) indicate the LAN status Push LEDs Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 28: Resolving Problems
Faulty data Check the data transmission within transmission with the LAN. ping. The maximum Wait until there is a number of free connection and connections has call the transmitter been reached. again. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... - Page 29 Alarm alarm. sources configuration page. No alarm response Specify the desired specified. alarm response on the Alarm connections configuration page; if necessary change the IP address. Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684...
- Page 30 Active proxy server in Create a rule in the contains empty network. local computer's fields. proxy settings to exclude local IP addresses. The camera LED Firmware upload Repeat firmware flashes red. failed. upload. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
-
Page 31: Testing The Network Connection
Check the IP address, subnet mask, and gateway address. Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal firmware can be viewed on a service page. -
Page 32: Maintenance
Repair Notice! Never open the casing of the unit The unit does not contain any user-serviceable parts. Refer all repairs to suitable qualified specialists. 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems... -
Page 33: Reset
Any changes to the settings are overwritten by the factory defaults. A reset may be necessary, for example, if the unit has invalid settings that prevent it from functioning as desired. Push Reset Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... -
Page 34: Decommissioning
The unit should only be passed on together with this installation guide. 10.2 Disposal Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. -
Page 35: Technical Data
Video performance – Sensitivity – 360° lens (3100K, reflectivity 89%, F2.8, 30IRE) Color 0.55 lx Mono 0.18 lx Video performance – Sensitivity – 180° lens (3100K, reflectivity 89%, F2.8, 30IRE) Color 0.46 lx Mono 0.15 lx Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684... - Page 36 Video 1 channel Full image circle 2640 x 2640 Video 2 channel Full panoramic 3584 x 504 E-PTZ 1536 x 864 Quad 1536 x 864 Panoramic 2688 x 800 Double panoramic 1920 x 1080 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
- Page 37 Noise reduction Intelligent Dynamic Noise Reduction with separate temporal and spatial adjustments Intelligent defog Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes (switchable) Exposure region Multiple selectable regions Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684...
- Page 38 180° (H) x 93° (V) version) Field of view (360° 180° (H) x 180° (V) version) Minimum object 0.1 m distance Day/Night Switched mechanical IR filter Audio Audio input Integrated microphone (can be permanently disabled) 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
- Page 39 HD recording) Recording Continuous recording, ring recording. alarm/events/schedule recording Software Unit Configuration Via web browser or Configuration Manager Firmware update Remotely programmable Software viewer Web browser, Bosch Video Client, or third party software Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684...
- Page 40 -20°C to +40°C (-4°F to 104°F) Temperature Storage -20°C to +60°C (-4°F to 140°F) Temperature Operating humidity 20% to 93% RH Storage humidity up to 98% RH Vandal resistance IK06 (Lens: IK04) 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
- Page 41 FLEXIDOME IP Technical data | en panoramic 7000 MP 11.2 Dimensions Ø105 (4.13) mm(in) Ø158 (6.22) Ø150 (5.90) Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684...
- Page 42 FLEXIDOME IP en | Technical data panoramic 7000 MP NPT 3/4" PG16 Ø158 (6.22) (1.85) 2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems...
- Page 44 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2016...