Click the Detail tab.
2.
Select a port whose operation parameters you want to view in the chassis front panel, as shown
3.
in
Figure
of the page. Whether the parameter takes effect is displayed in the square brackets.
Figure 61 The Detail tab
Port management configuration example
Network requirements
As shown in
Server A, Server B, and Server C are connected to GigabitEthernet 1/0/1, GigabitEthernet 1/0/2,
•
and GigabitEthernet 1/0/3 on the switch respectively. The rates of the network adapters of these
servers are all 1000 Mbps.
The switch connects to the external network through GigabitEthernet 1/0/4 whose rate is 1000
•
Mbps.
To avoid congestion at the egress port, GigabitEthernet 1/0/4, configure the auto-negotiation rate
•
range on GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 as 100
Mbps.
61. The operation parameter settings of the selected port are displayed on the lower part
Figure
62:
29