Monitor Out - Hitachi CP-X4022WN User Manual

Connection to the ports

NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the

input ports of the projector are recessed.

►Only the signal that is input from the COMPUTER IN1 or IN2 can be output

from the MONITOR OUT port.

A

COMPUTER IN1,

D-sub 15pin mini shrink jack

• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)

• H/V. sync. signal: TTL level (positive/negative)

• Composite sync. signal: TTL level

• Video signal:

-Y, Analog, 1.0±0.1Vp-p with composite sync, 75Ω terminated

-Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated

-Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated

• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60

Pin

1

Video Red, Cr/Pr

2

Video Green, Y

3

Video Blue, Cb/Pb

4

(No connection)

5

Ground

6

Ground Red, Ground Cr/Pr

7

Ground Green, Ground Y

8

Ground Blue, Ground Cb/Pb

B

Signal

A

Pin

9

(No connection)

10 Ground

11

(No connection)

A : SDA (DDC data), (No connection)

12

B : (No connection)

13 H. sync / Composite sync., (No connection)

14 V. sync., (No connection)

A : SCL (DDC clock), (No connection)

15

B : (No connection)

3

Connection to the ports

B

Signal