Connecting A Vcr - Samsung 330 User Manual

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the

instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna

from the back of the TV.

2. Connect the cable or antenna to

the ANT IN terminal on the back

of the VCR.

3. Connect an RF Cable between

the ANT OUT terminal on the

VCR and the ANT IN terminal

on the TV.

4. Connect a Video Cable

between the VIDEO OUT jack

on the VCR and the AV IN 1

[Y/VIDEO] jack on the TV.

5. Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the AV

IN 1 [R-AUDIO-L] jacks on the

TV.

If you have a "mono"

(non-stereo) VCR, use a

Y-connector (not supplied)

to hook up to the right and

left audio input jacks of the

TV. If your VCRis stereo,

you mustm connect two

cables.

VCR Rear Panel

5

Audio Cable (Not supplied)

4

Video Cable (Not supplied)

3

RF Cable (Not supplied)

Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not

match the color of the video cable (Yellow).

English - 10

ANT IN

TV Rear Panel