Display Bezel - Dell Inspiron N5110 Service Manual

1

display assembly

3

display-cable connector

 

Replacing the Display Assembly

 

1. Follow the instructions in

Before You

 

2. Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.

 

3. Route the Mini-Card antenna cables through the routing guides.

 

4. Connect the Mini-Card antenna cables to the Mini-Card(s) (see

 

5. Connect the display cable and touch-screen cable to the connectors on the system board.

 

6. Follow the instructions from

 

7. Replace the two screws that secure the display assembly to the computer base.

 

8. Replace the battery (see

Replacing the

 

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

 Display Bezel

 

Removing the Display Bezel

 

1. Follow the instructions in

Before You

 

2. Remove the top cover (see

 

3. Remove the display assembly (see

 

CAUTION:

The display bezel is extremely fragile. Be careful when removing it to prevent damaging the display bezel.

 

4. Using your fingertips, carefully pry up the inside edge of the display bezel.

 

5. Remove the display bezel.

2

screws (4)

4

Mini-Card antenna cables (2)

Begin.

step 2

to

step 7

in

Replacing the Palm-Rest

Battery).

Begin.

Removing the Top

Cover).

Removing the Display

Assembly).

Replacing the

Mini-Card(s)).

Assembly.