Video & Audio Setup - Samsung SNV-L6013R User Manual

tab.

2. Click

3. Set the audio input value.

• Source : Sets the audio input.

- Line : Connect the cable to the audio device.

- External microphone : 3.5 pi(¢) jack type external MIC.

• Apply power to Ext. Mic. : If the external microphone

connected has no separate power supply, check this

option to set camera to supply power to the connected external microphone. The option is enabled if

• Codec : Specify the audio codec.

- G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation) encoding.

ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a

PBX.

- G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse Code Modulation) for

variable bit rates of 40/32/24/16 Kbps to 64 Kbps PCM encoding.

• Bitrate : Set the bit rate to differentiate compression ratio if using G.726 codec.

• Gain : Specify the audio input amplification.

Sound quality deterioration or howling may occur if the loudness of the sound source or gain value were set excessively.

`

J

4. When done, click [Apply (

)].

)>

English _31