Table of Contents
Detaching the Main board and Front Cabinet Assembly from the Bottom/Rear assembly
1) Release 2 catches 'B' to free the Main board from the Front
Cabinet Assembly as shown in figure 6.
2) Loosen 2 screws 'D ' at the bottom of the Front Cabinet on
both sides of the set.
3) Release 2 catches 'C' on both sides of the Front Cabinet
and pull the Front Cabinet assembly out of the Bottom
plate.
Pull out
main
board
Dismantling of the Key Board , VFD Board,Tape Board and Cassette module
1) Loosen 5 screws 'E' to remove the Bracket CDC Right as
shown in figure 7.
2) Loosen 5 screws 'F' to remove the KEY board figure 7.
E
F
E
H
2-2
B
C
D
Figure 6
3) Loosen 9 screws 'H' to remove the VFD Board figure 9.
4) Loosen 1 screws 'G' to remove the Tape Board figure 8.
5) Loosen 8 screws 'I' to remove the Cassette Module figure
10.
G
Figure 8
Figure 7
I
Figure 9
Figure 10
Dismantling of the Rear Panel
1) Loosen 8 screws 'J' to remove the Rear Panel figure 11.
3) Release 2 catches 'K' on both sides of the Rear Panel with
the help of a minus screw driver and pull out the Rear Panel
figure 11.
J
Dismantling of the Power Board
1) Loosen 4 screws 'L' to remove the Power Board figure 12.
2-2
Pull out
K
Figure11
L
Figure 12
Hide quick links:
Table of Contents
