Table of Contents
Wiring connection
IMPORTANT : We recommend installing the unit with a commercially available custom
wiring harness specific for your car and leave this job to professionals for your safety.
Consult your car audio dealer.
Microphone input jack ( 11)
To front speaker (left) / For 3-way
crossover: Mid range speaker (left)
To front speaker (right) / For 3-way
crossover: Mid range speaker (right)
To rear speaker (left)
For 3-way crossover: Tweeter (left)
To rear speaker (right)
For 3-way crossover: Tweeter (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
26
Fuse (10 A)
White
White/Black
If no connections are made, do not let the wire come out from the tab.
Gray
Gray/Black
Brown
Green
(Mute control wire)
Green/Black
Purple
Purple/Black
Light blue/yellow
(Steering remote
control wire)
Red (Ignition wire)
Yellow (Battery wire)
Blue/White
(Power control wire/
Antenna control wire)
When connecting to an external amplifier, connect its
ground wire to the car's chassis to avoid damaging the
unit.
Front/ Rear/subwoofer output
For 3-way crossover: Mid Range/
Woofer output
Antenna terminal
To connect the Kenwood navigation
system, refer your navigation
manual
To the steering wheel remote
control adapter
To the power control terminal when
using the optional power amplifier
or to the antenna control terminal
in the vehicle
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
(F) Screws
Hide quick links:
Table of Contents
