Table of Contents
9. Bleeding
DENSITY 1
Normal
Problem/Unit
Media smudges easily.
Printable side reversed.
Print mode
10. Dimensional accuracy problems
Problem/Unit
Expansion/contraction
of media
Paper feed accuracy
compensation value
Step
Check item
1
Is the recommended type of media being
used?
Is the printable side of the media facing
2
up?
3
Check the print mode.
Is it in "Draft" mode?
Step
Check item
1
Is it corrected by using the media after
placing the media under the machine
operating environment for some time?
2
Confirm with the paper feed accuracy
compensation value adjustment pattern.
CHAPTER 5. TROUBLESHOOTING
DENSITY 1
Abnormal
Result
Use the recommended type of
NO
media (coated paper or other
smudge resistant paper).
Explain to the user to use the
NO
media with the printable side
facing up.
Set the [Print Mode] to other
YES
than "Draft".
Result
YES
Explain to the user to use the
media only after placing it
under the machine operating
environment for some time.
NO
Adjust the paper feed accu-
racy compensation value.
(See page
Remedy
Remedy
5-13).
5–51
Chapters
Table of Contents
