1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack expe- rience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out.
• The product must be unplugged during installation, maintenance, cleaning and repai- ring procedures. • Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resour- ces by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before dis- posing of the product.
2.3 Removing the transportation locks 2.4 Connecting water supply The water supply pressure required to run the product is WARNING: Do not remove the transportation locks between 1 to 10 bars (0.1 – 1 MPa). It is necessary to before taking out the packaging reinforcement. have 10 –...
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
noise problem. • Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case. • Place curtains in without compressing them. Remove curtain attachment items. • Fasten zippers, sew loose buttons and mend rips and tears.
Page 8
• Do not exceed the (>max<) level marking in the softener compartment. • If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer. Using liquid detergents If the product contains a liquid detergent cup: •...
application, select a programme with extra rinse and add Clothes the bleaching agent while the machine is taking water Colours from the detergent compartment during first rinsing step. (Recommended temperature range based • Do not use bleaching agent and detergent by mixing on soiling level: cold -40 °C) them.
• Hand wash • Spin + Drain Use this programme to wash your woolen/delicate clothes Use this programme to apply an additional spin cycle for that bear “not machine- washable” tags and for which hand your laundry or to drain the water in the machine. wash is recommended.
4.10 Auxiliary function selection If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. Select the required auxiliary functions before starting Program resumes. Water is drained, laundry is spun and the the program.
4.11 Starting the programme If the machine does not pass to the spinning step, Rinse 1. Press Start / Pause button to start the programme. Hold function might be active or the automatic unbalanced 2. Programme follow-up light showing the startup of the load detection system might be activated due to the unbalanced distribution of the laundry in the machine.
3 After cleaning, replace the siphon back to its seating and Depending on the step where the programme was push its front section downwards to make sure that the canceled in, you may have to put detergent and softener locking tab engages. again for the programme you have selected anew.
5.4 Cleaning the water intake filters 2 Open the filter cap. There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine.
Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMY 61232 MB3 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.847...
Page 18
Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMY 61032 PTMB3 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.847...
7 Troubleshooting Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>> *Press the Start / Pause / Cancel button. Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme.