Page 1: Table Of Contents
Order No. RAC0503011C2 Multi Air Conditioner CS-ME7DKEG CS-ME10DD3EG CS-ME10DTEG CS-E15DB4EW CS-ME7DKRG CS-ME7DKDG CS-E9DKEW CS-E9DKRW CS-E9DKDW CS-E12DKEW CS-E12DKRW CS-E12DKDW CS-E15DKEW CS-E15DKRW CS-E15DKDW CS-E18DKEW CS-E18DKRW CS-E18DKDW CS-E15DD3EW CS-E18DD3EW CS-E15DTEW CS-E18DTEW CS-E18DB4EW Please file and use this manual together with the Service Manuals for the following models: Indoor unit models: CS-ME7CKPG, CS-ME10CKPG, CS-ME12CKPG, CS-ME14CKPG and CS-ME18CKPG;...
Page 2 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.5. Outdoor units: CU-2E15CBPG / CU-2E18CBPG 11.2. Duct Type 4.6. Outdoor units: CU-3E23CBPG / CU-4E27CBPG 11.3. Ceiling Floor Type 5 Dimensions 11.4. Mini-Cassette Type 5.1. Wall Type 12 Operating Instructions 5.2. Duct Type 13 Installation and Servicing Air Conditioner Using R410A 5.3.
Page 3: Features
4.4 kW and 5.0 kW) 1) Two CS-ME7DKEG only. (Total nominal cooling capacity is 4.4 kW.) 2) One CS-ME7DKEG and one CS-E9DKEW. (Total nominal cooling capacity is 5.0 kW.) Remarks for CU-3E23CBPG / CU-4E27CBPG: 1. At least two indoor units must be connected.
Page 4: About Lead Solder (Pbf)
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW • • • • Serviceability − − − − Self diagnosis − − − − Test Run at both Cooling and Heating rated frequency • • • • Built-in drain pump (Cassette and Duct type) −...
Page 5: Functions
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3 Functions 3.1. Wall Type 3.1.1. Remote Control...
Page 6 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.1.2. Indoor Unit...
Page 7 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 8: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.2. Duct Type 3.2.1. Remote Control...
Page 9 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.2.2. Indoor Unit...
Page 10 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 11: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.3. Ceiling Floor Type 3.3.1. Remote Control...
Page 12 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.3.2. Indoor Unit...
Page 13: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.4. Mini-Cassette Type 3.4.1. Remote Control...
Page 14 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 3.4.2. Indoor Unit...
Page 15: Product Specifications
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4 Product Specifications 4.1. Wall Type CS-ME7DKEG CS-E9DKEW CS-E12DKEW CS-E15DKEW CS-E18DKEW Model Unit CS-ME7DKRG CS-E9DKRW CS-E12DKRW CS-E15DKRW CS-E18DKRW CS-ME7DKDG CS-E9DKDW CS-E12DKDW CS-E15DKDW CS-E18DKDW Item Wall Type Power Source Outdoor power Single 230V 50Hz Air Volume...
Page 16: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.2. Duct Type Model Unit CS-ME10DD3EG CS-E15DD3EW CS-E18DD3EW Item Duct Type Power Source Outdoor power Single 230V 50Hz Air Volume Cooling /min High: 7.0 High: 7.8 High: 10.3 (cfm) (250) (280) (360) Heating /min High: 8.9 High: 12.6...
Page 17: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.3. Ceiling Floor Type Model Unit CS-ME10DTEG CS-E15DTEW CS-E18DTEW Item Ceiling Floor Type Power Source Outdoor power Single 230V 50Hz Air Volume Cooling /min High: 9.3 High: 11.7 High: 12.1 (cfm) (330) (410) (430) Heating /min High: 9.3...
Page 18: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.4. Mini-Cassette Type Model Unit CS-E15DB4EW CS-E18DB4EW Item Mini-Cassette Type Power Source Outdoor power Single 230V / 240V, 50Hz Air Volume Cooling /min High: 10.5 High: 11.0 (cfm) (370) (390) Heating /min High: 10.8 High: 11.5...
Page 19: Outdoor Units: Cu-2E15Cbpg / Cu-2E18Cbpg
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.5. Outdoor units: CU-2E15CBPG / CU-2E18CBPG Outdoor Unit Indoor unit combination Operation Capacity (kW) Power input (kW) Current (A) mode Operation Class (kW) Rating mini - max Rating mini - max CU-2E15CBPG One-room Cooling 2.20 1.1 - 2.9...
Page 20: Outdoor Units: Cu-3E23Cbpg / Cu-4E27Cbpg
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4.6. Outdoor units: CU-3E23CBPG / CU-4E27CBPG Outdoor Unit Indoor unit combination Operation Capacity (kW) Power input (kW) Current (A) mode Operation Class (kW) Rating mini - max Rating mini - max CU-3E23CBPG One-room Cooling 2.20 1.9 - 2.7...
Page 21 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Outdoor Unit Indoor unit combination Operation Capacity (kW) Power input (kW) Current (A) mode Operation Class (kW) Rating mini - max Rating mini - max CU-3E23CBPG Three-room 2.8 + 2.8 + Cooling 6.80 2.7 - 8.2 1.96...
Page 22 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Outdoor Unit Indoor unit combination Operation Capacity (kW) Power input (kW) Current (A) mode Operation Class (kW) Rating mini - max Rating mini - max CU-4E27CBPG Three-room 2.2 + 2.8 + Cooling 8.00 2.8 - 8.3 2.46...
Page 23 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Outdoor Unit Indoor unit combination Operation Capacity (kW) Power input (kW) Current (A) mode Operation Class (kW) Rating mini - max Rating mini - max CU-4E27CBPG Four-room 2.2 + 2.2 + Cooling 8.00 2.9 - 8.9 2.11...
Page 24: Dimensions
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5 Dimensions 5.1. Wall Type...
Page 25 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 26: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5.2. Duct Type...
Page 27 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 28: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5.3. Ceiling Floor Type...
Page 29: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5.4. Mini-Cassette Type...
Page 30: Refrigeration Cycle Diagram
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 6 Refrigeration Cycle Diagram 6.1. CU-2E15CBPG / CU-2E18CBPG...
Page 31: Cu-3E23Cbpg / Cu-4E27Cbpg
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 6.2. CU-3E23CBPG / CU-4E27CBPG...
Page 32: Block Diagram
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 7 Block Diagram...
Page 33: Wiring Diagram
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 8 Wiring Diagram 8.1. Wall Type...
Page 34: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 8.2. Duct Type...
Page 35: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 8.3. Ceiling Floor Type...
Page 36: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 8.4. Mini-Cassette Type...
Page 37: Operation Details
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9 Operation Details 9.1. Wall Type 9.1.1. Basic Function Inverter control, which equipped with a microcomputer in determining the most suitable operating mode as time passes, automatically adjusts output power for maximum comfort always. In order to achieve the suitable operating mode, the microcomputer maintains the set temperature by measuring the temperature of the environment and performing temperature shifting.
Page 38 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Table (d): Indoor Air Temperature Shifting 1. Target room temperature shift value (dGetaDst) • • • • To offset the absolute gap between detection temperature with actual room temperature. • • • • The heat exchanger unit’s temperature is different based on operation mode, it becomes the action operation mode value.
Page 39 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.2. Simultaneous Operation Control 1. Operation modes which can be selected using the remote control unit: Automatic, Cooling, Dry, Heating, Fan operation mode. 2. Types of operations modes which can be performed simultaneously • • • • Cooling operation and cooling, Dry or fan operation •...
Page 40 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.3. Cooling Operation 9.1.1.3.1. Thermostat control • • • • Compressor is OFF when Intake Air Temperature - Internal Setting Temperature < -1.5°C. • • • • Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature > Compressor OFF point.
Page 41 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.6. Automatic Operation This mode can be set using remote control and the operation is decided by remote control setting temperature, indoor intake air temperature and outdoor air temperature. During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30 seconds to detect the indoor intake and outdoor air temperature.
Page 42 1110 1040 Notes: 1. Refer to the CS-ME7DKEG column for CS-ME7DKRG and CS-ME7DKDG. 2. Refer to the CS-E9DKEW column for CS-E9DKRW and CS-E9DKDW. 3. Refer to the CS-E12DKEW column for CS-E12DKRW and CS-E12DKDW. 4. Refer to the CS-E15DKEW column for CS-E15DKRW and CS-E15DKDW.
Page 43 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW B. Indoor Fan Control i. Indoor fan control operation outline 1. Cooling / Dry...
Page 44 1330 1350 • • • • Refer to the CS-ME7DKEG column for CS-ME7DKRG and CS-ME7DKDG. • • • • Refer to the CS-E9DKEW column for CS-E9DKRW and CS-E9DKDW. • • • • Refer to the CS-E12DKEW column for CS-E12DKRW and CS-E12DKDW.
Page 45 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. Heating Note: a. UP: • • • • If move from Lo, the fan speed will be shifted to Maximum 1,520 rpm. • • • • If move from Maximum, the fan speed no change.
Page 46 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW D. Deodorizing Control i. Control condition Control at cooling/dry operation and auto fan speed. No Deodorizing Control is performed during ON timer standby operation and during Anti-freezing control prevention. ii. Operation The odor status is arranged as below and it is shifted as follows.
Page 47 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Horizontal Airflow 1. Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the angles as stated below. For heating mode operation, the angle of the vane depends on the indoor heat exchanger temperature as Figure 1 below.
Page 48 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
Page 49 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.11. Powerful Mode Operation When the powerful mode is selected, the internal setting temperature will shift to achieve the setting temperature quickly. (a) Cooling Operation (b) Soft Dry Operation (c) Heating Operation 9.1.1.12. Delay ON Timer Control Delay ON timer can be set using remote control, the unit with timer set will start operate earlier than the setting time.
Page 50 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.14. Auto Restart Control • • • • If there is a power failure, operation will automatically be restarted when the power is resumed. It will start with the previous operation mode and airflow direction. (Timer Delay Safety Control is valid.) 1.
Page 51: Ionizer Operation
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.16. Auto Operation Switch 1. When the switch is pressed between 0 to 5 seconds, Auto Mode operation starts to function. 2. When the switch is pressed between 5 to 8 seconds, the unit is forced to operate in Cooling Mode.
Page 52 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW b. Operation Mode + Ionizer Operation. 1. Ionising Operation Start Condition When air conditioner unit is in “ON” condition (Heat, Cool, Dry, Fan, Auto mode) and an ION operation button at remote control is pressed. Ionizer on & ION LED illuminates. (3 → 4) Power LED also illuminates.
Page 53 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.1.1.17.2. Ionizer Operation case study Case 1 9.1.2. Anti-Freezing Control 1. When indoor heat exchanger temperature is lower than 2°C continuously for six minutes, compressor will stop operating. 2. Compressor will resume its operation three minutes after the indoor heat exchanger is higher than 10°C.
Page 54: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.2. Duct Type 9.2.1. Simultaneous Operation Control 1. Operation modes which can be selected using the remote control unit: Automatic, Cooling, Dry, Heating, Fan operation mode. 2. Types of operations modes which can be performed simultaneously •...
Page 55: Indoor Fan Control
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.2.2. Indoor Fan Control • • • • The following shows how fan speed changes depending on the setting made with the FAN SPEED button and other operating conditions. • • • • Actual fan speed may differ from that you set with remote control.
Page 56: Drain Pump Control
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.2.3. Drain Pump Control Basic operation • • • • The drain pump starts 50 seconds after the indoor unit starts or the thermostat comes on (i.e., 10 seconds after the fan motor starts). The drain pump stops 30 seconds after the indoor unit stops or the thermostat turns off.
Page 57 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.2.4. Auto Restart Control • • • • If there is a power failure, operation will automatically be restarted when the power is resumed. It will start with the previous operation mode and airflow direction. (Timer Delay Safety Control is valid.) 1.
Page 58 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.2.5. Other Indoor Unit Operation Functions 9.2.5.1. Auto button Proceed with operation when the air conditioner is stopped. (When the auto button is pressed during operation, the air conditioner is stopped.) 1. Emergency operation Press the auto button and release it within 5 seconds to perform emergency operation.
Page 59 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW • • • • Under various setting mode, after select the transmission code combination of remote control, press any button of remote control to transmit a signal to indoor unit. The transmission code will be stored in EEPROM.
Page 60: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3. Ceiling Floor Type 9.3.1. Basic Function Inverter control, which equipped with a microcomputer in determining the most suitable operating mode as time passes, automatically adjusts output power for maximum comfort always. In order to achieve the suitable operating mode, the microcomputer maintains the set temperature by measuring the temperature of the environment and performing temperature shifting.
Page 61 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Table (d): Indoor Air Temperature Shifting 1. Target room temperature shift value (dGetaDst) • • • • To offset the absolute gap between detection temperature with actual room temperature. • • • • The heat exchanger unit’s temperature is different based on operation mode, it becomes the action operation mode value.
Page 62 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.2. Simultaneous Operation Control 1. Operation modes which can be selected using the remote control unit: Automatic, Cooling, Dry, Heating, Fan operation mode. 2. Types of operations modes which can be performed simultaneously • • • • Cooling operation and cooling, Dry or fan operation •...
Page 63 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.3. Cooling Operation 9.3.1.3.1. Thermostat control • • • • Compressor is OFF when Intake Air Temperature - Internal Setting Temperature < -1.5°C. • • • • Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature > Compressor OFF point.
Page 64 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.6. Automatic Operation This mode can be set using remote control and the operation is decided by remote control setting temperature, indoor intake air temperature and outdoor air temperature. During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30 seconds to detect the indoor intake and outdoor air temperature.
Page 65 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.7. Indoor Fan Motor Operation A. Basic Rotation Speed (rpm) • • • • Required rotation speed for fan is set to respond to the remote control setting (10 rpm unit) [Cooling, Dry, Fan] Remote Control —...
Page 66 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW B. Indoor Fan Control i. Indoor fan control operation outline 1. Cooling / Dry...
Page 67 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. Heating ii. Auto Fan Speed 1. Cooling Model No. A No. B No. C Powerful Program CS-ME10DTEG CS-E15DTEW CS-E18DTEW 1010 1030 Normal Program CS-ME10DTEG CS-E15DTEW CS-E18DTEW Quiet Program CS-ME10DTEG CS-E15DTEW CS-E18DTEW...
Page 68 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. Heating Note: a. UP: • • • • If move from Lo, the fan speed will be shifted to Maximum 1,520 rpm. • • • • If move from Maximum, the fan speed no change.
Page 69 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.8. Airflow Direction 1. There is one type of airflow, vertical airflow (directed by horizontal vane). 2. Control of airflow direction can be automatic (angles of direction is determined by operation mode, heat exchanger temperature and intake air temperature) and manual (angles of direction can be adjusted using remote control).
Page 70 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.9. Quiet operation (Cooling Mode/Cooling area of Dry Mode) A. Purpose To provide quiet cooling operation compare to normal operation. B. Control condition a. Quiet operation start condition • • • • When “quiet” button at remote control is pressed.
Page 71 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW C. Control contents a. Fan Speed manual 1. Fan speed is changed from normal setting to quiet setting of respective fan speed. This is to reduce sound of Hi, Me, Lo for 3dB. 2. Fan speed for quiet operation is -1 step from setting fan speed.
Page 72 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.13. Delay OFF Timer Control Delay OFF timer can be set using remote control, the unit with timer set will stop operate at set time. 9.3.1.14. Auto Restart Control 1. When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be selected randomly) after power supply resumes.
Page 73 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.3.1.17. Anti-Freezing Control 1. When indoor heat exchanger temperature is lower than 2°C continuously for six minutes, compressor will stop operating. 2. Compressor will resume its operation three minutes after the indoor heat exchanger is higher than 10°C.
Page 74: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4. Mini-Cassette Type 9.4.1. Basic Function Inverter control, which equipped with a microcomputer in determining the most suitable operating mode as time passes, automatically adjusts output power for maximum comfort always. In order to achieve the suitable operating mode, the microcomputer maintains the set temperature by measuring the temperature of the environment and performing temperature shifting.
Page 75 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Table (d): Indoor Air Temperature Shifting 1. Target room temperature shift value (dGetaDst) • • • • To offset the absolute gap between detection temperature with actual room temperature. • • • • The heat exchanger unit’s temperature is different based on operation mode, it becomes the action operation mode value.
Page 76 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.2. Simultaneous Operation Control 1. Operation modes which can be selected using the remote control unit: Automatic, Cooling, Dry, Heating, Fan operation mode. 2. Types of operations mode which can be performed simultaneously • • • • Cooling operation and cooling, Dry or fan operation •...
Page 77 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.3. Cooling Operation 9.4.1.3.1. Thermostat control • • • • Compressor is OFF when Intake Air Temperature - Internal Setting Temperature < -1.5°C. • • • • Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature > Compressor OFF point.
Page 78 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.6. Automatic Operation This mode can be set using remote control and the operation is decided by remote control setting temperature, indoor intake air temperature and outdoor air temperature. During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30 seconds to detect the indoor intake and outdoor air temperature.
Page 79 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.7. Indoor Fan Motor Operation A. Basic Rotation Speed (rpm) • • • • Required rotation speed for fan is set to respond to the remote control setting (10 rpm unit) [Cooling, Dry, Fan] Remote Control —...
Page 80 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW B. Indoor Fan Control i. Indoor fan control operation outline 1. Cooling / Dry...
Page 81 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. Heating ii. Auto Fan Speed 1. Cooling Model No. A No. B No. C Powerful Program CS-E15DB4EW CS-E18DB4EW Normal Program CS-E15DB4EW CS-E18DB4EW Quiet Program CS-E15DB4EW CS-E18DB4EW...
Page 82 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 2. Heating Note: a. UP: • • • • If move from Lo, the fan speed will be shifted to Maximum 1,520 rpm. • • • • If move from Maximum, the fan speed no change.
Page 83 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW D. Deodorizing Control i. Control condition Control at cooling/dry operation and auto fan speed setting. No Deodorizing Control is performed during ON timer standby operation and during Anti-freezing control prevention. ii. Operation The odor status is arranged as below and it is shifted as follows.
Page 84 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.9. Quiet operation (Cooling Mode/Cooling area of Dry Mode) A. Purpose To provide quiet cooling operation compare to normal operation. B. Control condition a. Quiet operation start condition • • • • When “quiet” button at remote control is pressed.
Page 85 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW b. Quiet operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a. Powerful button is pressed. b. Stop by OFF/ON switch. c. Timer “off” activates. d. Quiet button is pressed again.
Page 86 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 9.4.1.12. Delay ON Timer Control Delay ON timer can be set using remote control, the unit with timer set will start operate earlier than the setting time. This is to provide a comfortable environment when reaching the set ON time.
Page 87 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 4. When the switch is pressed between 11 to 16 seconds and together with the signal from remote control (timer decrement button for 5s), the unit can be changed to different controlling setting (4 type of transmission codes).
Page 88: Self Diagnosis Display
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 10 Self Diagnosis Display 10.1. Breakdown Self Diagnosis Function (Three Digits Alphanumeric Code) • • • • Once abnormality has been detected during operation, the unit will immediately stop its operation. (Timer LED blinks.) • • • • Although timer LED goes off when power supply is turned off, if the unit is operated under a breakdown condition, the LED will light up again.
Page 89: Error Code
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 10.2. Error Code Symbol Diagnosis Diagnosis method Indoor / Outdoor This trouble display appears when indoor/outdoor unit communication fails to be established after 30 seconds or abnormal more. communication 1. Measure the voltage of the indoor/outdoor unit communication cables, and check whether the voltage is being supplied properly to the outdoor unit or whether it is being returned from the outdoor unit to the indoor units.
Page 90 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Symbol Diagnosis Diagnosis method Outdoor discharge Disconnected discharge sensor • • • • When the condition temperature is higher than the discharge temperature + (plus) 6°C, a sensor pipe temp. sensor disconnection is detected, operation stops, and the trouble display appears (the timer lamp blinks).
Page 91 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Symbol Diagnosis Diagnosis method Indoor operating unit The restriction on the compressor frequency is started when the indoor unit heat exchanger temperature is freezing between 8°C and 12°C. Operation stops if a temperature below 0°C continues for 6 minutes. Three minutes later, operation is started up at a temperature from 3°C to 8°C.
Page 92 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Symbol Diagnosis Diagnosis method IPM (Power transistor When this trouble is detected from the electrical parts radiation fin temperature sensor and OLP output during module) or operation, operation stops, and it is restarted 3 minutes later. If the trouble occurs on 4 occasions, operation compressor stops, and the trouble display appears.
Page 93: Installation Instructions
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 11 Installation Instructions 11.1. Wall Type...
Page 94 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 95 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 96 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 97 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 98 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 99 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 100 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 101: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 11.2. Duct Type...
Page 102 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 103 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 104 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 105 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 106 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 107 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 108 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 109 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 110: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 11.3. Ceiling Floor Type...
Page 111 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 112 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 113 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 114 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 115 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 116: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 11.4. Mini-Cassette Type...
Page 117 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 118 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 119 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 120 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 121 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 122 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 123 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 124 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 125: Operating Instructions
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 12 Operating Instructions...
Page 126 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 127 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 128 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 129 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 130 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 131 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 132 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 133 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 134 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 135 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 136 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 137 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 138 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 139: Installation And Servicing Air Conditioner Using R410A
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13 Installation and Servicing Air Conditioner Using R410A 13.1. OUTLINE 13.1.1. About R410A Refrigerant 1. Converting air conditioners to R410A Since it was declared in1974 that chlorofluorocarbons (CFC), hydro chlorofluorocarbons (HCFC) and other substances pose a destructive danger to the ozone layer in the earth’s upper stratosphere (20 to 40 km above the earth), measures have been...
Page 140: Tools For Installing/Servicing Refrigerant Piping
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW d. R410A refrigerating machine oil Conventionally, mineral oil or a synthetic oil such as alkylbenzene has been used for R22 refrigerating machine oil. Because of the poor compatibility between R410A and conventional oils like mineral oil, however, there is a tendency for the refrigerating machine oil to collect in the refrigerating cycle.
Page 141: R410A Tools
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.2.2. R410A Tools 1. Copper tube gauge for clearance adjustment (used when flaring with the conventional flaring tool (clutch type)) • • • • This gauge makes it easy to set the clearance for the copper tube to 1.0-1.5 mm from the clamp bar of the...
Page 142 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5. Charging hose • • • • The pressure resistance of the charging hose has been raised to match the higher pressure of R410A. The hose material has also been changed to suit HFC use, and the size of the fitting has been changed to match the manifold ports.
Page 143 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 8. Electronic scale for refrigerant charging • • • • Because of the high pressure and fast vaporizing speed of R410A, the refrigerant cannot be held in a liquid phase inside the charging cylinder when charging is...
Page 144: Refrigerant Piping Work
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.3. REFRIGERANT PIPING WORK 13.3.1. Piping Materials It is recommended that you use copper and copper alloy jointless pipes with a maximum oil adherence of 40 mg/10m. Do not use pipes that are crushed, deformed, or discolored (especially the inside surface). If these inferior pipes are used, impurities may clog the expansion valves or capillaries.
Page 145 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW Fig. 11 Relation between the flare nut structure and flaring tool end Table 11 R410A flaring dimensions Nominal Outside Wall thickness A (mm) diameter diameter (mm) R410A flaring Conventional flaring tool (mm) tool, clutch type...
Page 146 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.3.3. Storing and Managing Piping Materials 1. Types of piping and their storage The following is a general classification of the refrigerant pipe materials used for ACs. Because the gas pressure of R410A is approximately 1.6 times as high as that of R22, copper pipes with the thickness shown in Table 10, and with minimal impurities must be used.
Page 147: Installation, Transferring, Servicing
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.4. INSTALLATION, TRANSFERRING, SERVICING 13.4.1. Inspecting Gas Leaks with a Vacuum Pump for New Installations (Using New Refrigerant Piping) 1. From the viewpoint of protecting the global environment, please do not release refrigerant into the atmosphere.
Page 148 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.4.2. Transferring (Using New Refrigerant Piping) 1. Removing the unit a. Collecting the refrigerant into the outdoor unit by pumping down The refrigerant can be collected into the outdoor unit (pumping down) by pressing the TEST RUN button, even when the temperature of the room is low.
Page 149 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW vacuum pump. Wait for 1-2 minutes, then check to make sure that the needle of the Low pressure gauge has not returned. See Fig. 13 for the remaining steps of this procedure. 5. Set the refrigerant cylinder onto the electronic scale, then connect the hose the cylinder and to the connection port for the electronic scale.
Page 150 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 13.4.6. Brazing As brazing requires sophisticated techniques and experiences, it must be performed by a qualified person. In order to prevent the oxide film from occurring in the pipe interior during brazing, it is effective to proceed with brazing while letting dry nitrogen gas (N ) flow.
Page 151: Disassembly Of Parts
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14 Disassembly of Parts 14.1. Wall Type 14.1.1. Indoor Control Board Removal Procedures 1. Remove the Front Grille. Fig. 1 2. Remove the Indoor Control Board. Fig. 4 Fig. 2 Fig. 3 Fig. 5...
Page 152 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14.1.2. Electronic Controller Removal Procedures 1. Remove Main Electronic Controller Fig. 7 Fig. 6 14.1.3. Cross Flow Fan and Fan Motor Removal Procedures 1. Remove Cross Flow Fan and Fan Motor. Fig. 8 Fig. 10...
Page 153: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14.2. Duct Type 14.2.1. Detaching the Upper and Inner Casing 14.2.2. Detaching the Control Board...
Page 154 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14.2.3. Detaching the Fan 14.2.4. Detaching the Fan Motor and Drain Motor...
Page 155: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14.3. Ceiling Floor Type 14.3.1. Front Grille Removal Procedure 2. Remove Fan Motor by: 1. Remove the Intake Grille and Air Filter from the Front Grille • • • • Releasing the connector Fan Motor (Fig. 5).
Page 156: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 14.4. Mini-Cassette Type 14.4.1. Disassembly of Parts 1. Open the Intake Grille from the Front Grille by moving the 3. Release the following parts (Fig. 3): catchers to center (Fig. 1). • • • • CN-STM1(WHT) connector •...
Page 157 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 5. Remove the Front Grille by removing the screw A and 7. Remove the Turbo Fan by removing the bolt (Fig. 7). screw B, C & D half way open (Fig. 5). Fig. 7 Fig. 5 8.
Page 158: Technical Data
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 15 Technical Data 15.1. Operation Characteristics...
Page 159 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 160 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 161 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 162 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 163 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 164: Electronic Circuit Diagram
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16 Electronic Circuit Diagram 16.1. Wall Type...
Page 165 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 166 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 167 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 168 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 169 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.1.1. Circuit Diagram (Remote Control)
Page 170 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.1.2. Printed Circuit Board (Indoor Unit)
Page 171: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.2. Duct Type 16.2.1. Circuit Diagram (Indoor Units: CS-ME10DD3EG / CS-E15DD3EW / CS-E18DD3EW)
Page 172 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.2.2. Printed Circuit Board (Indoor Unit)
Page 173: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.3. Ceiling Floor Type 16.3.1. Circuit Diagram (Indoor Units: CS-ME10DTEG / CS-E15DTEW / CS-E18DTEW)
Page 174 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 175 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 176 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 177 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.3.2. Circuit Diagram (Remote Control)
Page 178 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.3.3. Printed Circuit Board (Indoor Unit)
Page 179: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.4. Mini-Cassette Type 16.4.1. Circuit Diagram (Indoor Units: CS-E15DB4EW / CS-E18DB4EW)
Page 180 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 181 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 182 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 183 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 184 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.4.2. Circuit Diagram (Remote Control)
Page 185 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 16.4.3. Printed Circuit Board (Indoor Unit)
Page 186: Exploded View And Replacement Parts List
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17 Exploded View and Replacement Parts List 17.1. Wall Type 17.1.1. Exploded View (Indoor Unit)
Page 187 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.1.2. Replacement Parts List (Indoor Unit) Models: CS-ME7DKEG / CS-ME7DKRG / CS-ME7DKDG / CS-E9DKEW / CS-ME9DKRW / CS-E9DKDW / CS-E12DKEW /CS-E12DKRW / CS-E12DKDW REF. NO. PART NAME & DESCRIPTION QTY. CS-ME7DKEG CS-E9DKEW CS-E12DKEW REMARKS CS-ME7DKRG...
Page 188 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.1.3. Exploded View (Indoor Unit)
Page 189 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.1.4. Replacement Parts List (Indoor Unit) Models: CS-E15DKEW / CS-E15DKRW / CS-E15DKDW REF. NO. PART NAME & DESCRIPTION QTY. CS-E15DKEW CS-E15DKRW CS-E15DKDW REMARKS ← ← ← ← ← ← ← ← CHASSY COMPLETE CWD50C1431 ← ← ← ←...
Page 190 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.1.5. Exploded View (Indoor Unit)
Page 191 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.1.6. Replacement Parts List (Indoor Unit) Models: CS-E18DKEW / CS-E18DKRW / CS-E18DKDW REF. NO. PART NAME & DESCRIPTION QTY. CS-E18DKEW CS-E18DKRW CS-E18DKDW REMARKS ← ← ← ← ← ← ← ← CHASSY COMPLETE CWD50C1382 ← ← ← ←...
Page 192: Duct Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.2. Duct Type 17.2.1. Exploded View (Indoor Unit)
Page 193 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.2.2. Replacement Parts List (Indoor Unit) Models: CS-ME10DD3EG / CS-E15DD3EW / CS-E18DD3EW REF NO. PART NAME & DESCRIPTION QTY. CS-ME10DD3EG CS-E15DD3EW CS-E18DD3EW REMARKS ← ← ← ← ← ← ← ← FLOAT SWITCH CWA12161 ← ← ← ←...
Page 194: Ceiling Floor Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.3. Ceiling Floor Type 17.3.1. Exploded View (Indoor Unit)
Page 195 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.3.2. Replacement Parts List (Indoor Unit) Models: CS-ME10DTEG / CS-E15DTEW / CS-E18DTEW REF NO. PART NAME & DESCRIPTION QTY. CS-ME10DTEG CS-E15DTEW CS-E18DTEW REMARKS ← ← ← ← ← ← ← ← CHASSY COMPLETE CWD50C1419 ← ← ← ←...
Page 196: Mini-Cassette Type
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.4. Mini-Cassette Type 17.4.1. Exploded View (Indoor Unit)
Page 197 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW...
Page 198 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.4.2. Replacement Parts List (Indoor Unit) Models: CS-E15DB4EW / CS-E18DB4EW REF NO. PART NAME & DESCRIPTION QTY. CS-E15DB4EW CS-E18DB4EW REMARKS ← ← ← ← BASE PAN ASS’Y CWD52K1100 ← ← ← ← INNER POLYSTYRENE COMPLETE CWG07C1047 ←...
Page 199 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.4.3. Exploded View (Indoor Unit Front Grille)
Page 200 CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW 17.4.4. Replacement Parts List (Indoor Unit Front Grille) Model: CZ-BT12DE (Front Grille Complete) REF NO. PART NAME & DESCRIPTION QTY. PART NO. REMARKS FRONT GRILLE - COMPLETE CWE11C3105 FRONE - FRONT GRILLE CO. CWE11C3353 A.S. MOTOR DC SINGLE 12V 250 OHM CWA981105 BRACKET - A.S.

This manual is also suitable for:

Cs-me10dd3eg Cs-me10dteg Cs-e15db4ew Cs-me7dkrg Cs-me7dkdg Cs-e9dkew ... Show all

Panasonic CS-ME7DKEG Service Manual

1 Features

2 About Lead Solder (Pbf)

3 Functions

4 Product Specifications

5 Dimensions

6 Refrigeration Cycle Diagram

7 Block Diagram

8 Wiring Diagram

9 Operation Details

10 Self Diagnosis Display

11 Installation Instructions

12 Operating Instructions

13 Installation and Servicing Air Conditioner Using R410A

14 Disassembly of Parts

15 Technical Data

16 Electronic Circuit Diagram

17 Exploded View and Replacement Parts List

Quick Links

Related Manuals for Panasonic CS-ME7DKEG

Summary of Contents for Panasonic CS-ME7DKEG

This manual is also suitable for:

Table of Contents