Procedure For Tilting Down (Manual Tilt Models) - Yamaha F25A Owner's Manual
Hide thumbs
Also See for F25A:
- Owner's manual (170 pages) ,
- Service manual (144 pages) ,
- Owner's manual (98 pages)
Table of Contents
3.
Push the tilt support knob into the clamp
bracket
to
WARNING! After tilting the outboard
motor, be sure to support it with the
tilt support knob or tilt support lever.
Otherwise the outboard motor could
fall back down suddenly if oil in the
power trim and tilt unit or in the pow-
er tilt unit loses pressure.
TICE: Do not use the tilt support lever
or knob when trailering the boat. The
outboard motor could shake loose
from the tilt support and fall. If the
motor cannot be trailered in the nor-
mal running position, use an addi-
tional support device to secure it in
the tilt position. For more detailed in-
formation, see page 55.
UP
ZMU02823
support
the
engine.
[EWM00262]
[ECM01641]
4.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods. NOTICE: Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30192
Procedure for tilting down (manual
tilt models)
1.
Place the tilt lock lever in the lock posi-
tion.
NO-
2.
Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3.
Slowly tilt the engine down.
Operation
ZMU02812
" (down) to retract the
[ECM00251]
ZMU02306
51
- Quick Links:
- Specifications
Hide quick links:
Table of Contents
