Safety Precautions Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • Use only recommended power sources. • Do not attempt to disassemble, alter or apply heat to the product. •...
A. Features 1/3" Digital Wide Dynamic Color Camera Color:680TVL, B/W:700TVL Color:0.03Lux / B/W:0.01Lux Multi-Language OSD Control ATR Digital Powerful 128X WDR (52dB) Anti-Headlight (HLC) 2D Noise Reduction High Contrast Images Ideal for Backlight Environments ...
B. Standard Specifications Mode NTSC Pick Up Element 1/3 Inch SONY 960H_ CCD Image Sensor Image Signal Process Digital Signal Processing System Sensor ICX672AKA ICX673AKA Number OF Pixel 1020 (H) × 508 (V) 1020 (H) × 596 (V) Picture Element...
C. OSD Function ( 1 ) MAIN MENU In the main menu, each submenu is selected. ↲ To Exit the OSD menu. UP / Down: Change Sub Menu Selection. Left / Right: Selec/Enter the Sub-menu. Submenu Function explanation LENS Enter the LENS/ settings menu.
Page 8
MENU SUBMENU AREA SEL BOTTOM LEFT PRIVACY RIGHT COLOR TRANSP MOSAIC AUTO DAY/NIGHT COLOR NR MODE Y LEVEL C LEVEL CHR1 CHR2 A - ) Each User Font CAMERA ID ← → ↑ ↓ SYNC ENGLISH 日本語 DEUTSCH FRANCAIS LANGUAGE РУССКИЙ...
( 1.1 ) LENS Sets the mechanical iris of the lens.:MANUAL and AUTO. Function Option Description DC AUTO IRIS TYPE VIDEO VIDEO AUTO IRIS OPEN The mechanical iris is fixed to open. MODE CLOSE The mechanical iris is fixed to close. AUTO The mechanical iris is controlled automatically SPEED...
Page 10
Function Option Description SHUT+AUTO IRIS MODE HIGH AUTO IRIS LUMINANCE MODE 000~255 MODE LUMINANCE BRIGHTNESS x0.25,x0.50,x0.75,x1.00 MANUAL Function Option Description "SHUT+AGC" is the only option MODE SHUT+ AGC available for the ME operation mode. There are no other options. When the ME preset value is changed, 1/60(1/50),1/100(1/120) the shutter speed will differ from the...
( 1.3 ) WHITEBAL The display switches to the "ATW" branch menu screen when Enter is input from the ATW selection status. PUSH The display switches to the "USER1 WB" branch USER1 menu screen when Enter is input from the USER1 selection status.
Page 12
PUSH USER1 Function Option Description B-GAIN 000-255 Used for operating the B gain in the WB fixed gain mode. R-GAIN 000-255 Used for operating the R gain in the WB fixed gain mode.
Page 13
USER2 Function Option Description B-GAIN 000-255 Used for operating the B gain in the WB fixed gain mode. R-GAIN 000-255 Used for operating the R gain in the WB fixed gain mode. ANTI CR ...
Page 14
MANUAL Function Option Description Sets the B and R gain values for manual WB. LEVEL 000-255 By incrementing or decrementing the B gain value, the R gain value is also adjusted in tandem. PUSH LOCK ...
( 1.4 ) BACKLIGHT Backlight compensation OFF Backlight compensation ON BACKLIGHT HLC function ON ( 1.5 ) PICT AD JUST Function Option Description MIRROR OFF/ON Sets the horizontal flip for the display output. BRIGHTNESS 000-255 Sets the screen brightness. CONTRAST 000-255 Sets the screen contrast.
( 1.6 ) ATR Function Option Description LUMINANCE LOW / MID / HIGH Sets the extent of the luminance compression. LOW / MIDLOW / CONTRAST MID / MIDHIGH / Sets the extent of the contrast enhancement. HIGH ( 1.7 ) MOTION DE...
Page 17
Function Option Description DETECT SENSE 000-127 Sets the motion detection sensitivity. Controls the ON/OFF status of the motion detection block display BLOCK DISP The display switches to the "dead band setting" EBABLE screen when the Enter operation input is performed from the ENABLE selected status.
( 1.8 ) PRIVACY Function Option Description Selects the mask frame to be adjusted. AREA 1/8,2/8,3/8,4/8 *When MONITOR AREA has been set to ON by the 5/8,6/8,7/8,8/8 MOTION DET setting, four frames--1/4, 2/4, 3/4 and 4/4--are selected. 000-244(NTSC) Sets the top side of the mask frame selected by the 000-288(PAL) AREA SEL parameter.
( 1.9 ) DAY/NIGHT Function Option Description AUTO: Day or Night is automatically identified and controlled accordingly. AUTO The display switches to the "DAY/NIGHT" branch menu screen when the Enter operation input is performed from the AUTO selected status. DAY/NIGHT COLOR COLOR: The Day/Night function is set to OFF.
( 1.10 ) NR Function Option Description OFF: Y and C filters OFF Y: Y filter ON NR MODE C: C filter ON Y/C: Y and C filters ON Y LEVEL 000-015 Sets the Y filter strength. C LEVEL 000-015 Sets the C filter strength. ( 1.11 ) SYNC...
( 1.12 )CAMERA ID Option Description A selected character is registered at the position selected by the A - ) CAMERA ID cursor when the Enter operation input is performed from Each User the status in which the characters have been selected using the character selection cursor.
( 1.13 ) LANGUAGE Function Option Description ENGLISH 日本語 DEUTSCH Selects the language in which to display the FRANCAIS internal OSD menu. LANGUAGE РУССКИЙ The menus can be changed in real time in the PORTUGUÊS selected language. ESPAÑOL 中文 ( 1.14 ) CAMERA RESET Function Option Description...
( 1.15 ) SAVE ALL Function Option Description All the settings of the internal OSD menu are saved in the SAVE ALL None EEPROM together when the Enter operation input is performed from the SAVE ALL selected status.
Attachment A: UTC Controller Installation UTC controller (optional)
Page 25
FUHO TECHNOLOGY Co., LTD No. 30, Lane 726, Jinma Rd, Sec. 3, Chang Hua City, Taiwan. TEL:886-4-751-2881 FAX:886-4-751-5860 Made in Taiwan http://www.vacron.com...