Osd Attention Signal - Philips 150b Service Manual

http://jdwxzlw.com/?fromuser=华盛维修

10

Hudson 150B

Go to cover page

The monitor will detect various display situation automatically. When

the monitor detects the problems, the screen will show the different

warning signals to remind you what is happen to your monitor.

NO VIDEO INPUT

This screen appears if there is no video signal input. Please check

that the signal cable is properly connected to the video card of PC

and make sure PC is on.

ATTENTION

NO VIDEO INPUT

CANNOT DISPLAY THIS VIDEO MODE..

This screen warns when the input frequency from the computer is not

a standard video mode or out of the monitor's scanning range.

Please change the display mode of the operating software in the

computer(i.e. Windows) to 1024 x 768@ 60Hz for best display

results.

ATTENTION

CANNOT DISPLAY THIS VIDEO

MODE, CHANGE COMPUTER DISPLAY

INPUT TO 1024X768@60HZ

ENTERING SLEEP MODE

This screen appears when the monitor is about to enter the sleep

mode. Please press any key on the keyboard or click the mouse to

wake up the monitor and computer.

ATTENTION

ENTERING SLEEP MODE

USE 1024 X 768 FOR BEST RESULT

This message appears at the top of the OSD window when the video

mode input is not the recommended 1024x768. Other modes may

result in some picture distortion. Please adjust the video mode to

1024x768 at 60Hz for best display quality.

USE 1024x768 FOR BEST RESULT

Back

家电维修资料网，免费下载各种维修资料

OSD Attention signals

WAIT FOR AUTOMATIC ADJUSTMENT

This screen appears when you touch the

disappear when the monitor is properly adjusted.

CHECK CABLE CONNECTION

This message appears when a signal cable is disconnected while

computer is working.

ATTENTION

WAITING FOR AUTOMATIC ADJUSTMENT

ATTENTION

CHECK CABLE CONNECTION

button. It will

Forward