Table of Contents
Model
Item
Power source
Operation data
Nominal capacity
kW
Power consumption
kW
Running current
Power factor
%
Inrush current
Sound Pressure Level
dB(A)
Exterior dimensions
mm
Height x Width x Depth
Exterior appearance
(Munsell color)
Net weight
kg
Refrigerant equipment
Compressor type & Q'ty
Starting method
Refrigerant oil
Heat exchanger
Refrigerant control
Air handling equipment
Fan type & Q'ty
Motor
Air flow
CMM
External static pressure
Pa
Outdoor air intake
Air filter, Q'ty
Shock & vibration absorber
Insulation (noise & heat)
Electric heater
Remote controller
Room temperature control
Safety equipment
Installation data
mm
Refrigerant piping size
Connecting method
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity
Drain pump
Drain
Insulation for piping
IP code
Standard Accessories
Notes (1) The data are measured at the following conditions.
Item
Indoor air temperature
Operation
Cooling
27˚C
Heating
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to
ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 400V50Hz or 380V60Hz.
(5) Values of sound pressure level become increased 5dB (A) when external static pressure is 200Pa (factory setting).
(6) Values of air flow are those at external static pressure 200Pa (factory setting).
Indoor unit FDU250VSVF
Cooling
25.0 [ 10.0 (Min.)~28.0 (Max.)]
9.91 / 10.21
A
15.7 / 17.0
A
360 × 1,570 × 830
Louver fin & inner grooved tubing
Centrifugal fan × 4
W
270 × 2 < Direct line start >
Hi : 68 / 80
200
Possible (on return duct)
Procure locally
Rubber sleeve (for fan motor)
Polyurethane form
W
wired : RC-EX1A (option) wired : RC-E5 (option) wireless : RCN-KIT3-E (option)
Thermostat by electronics
Internal thermostat for fan motor
Frost protection thermostat
Liquid line : I/Uφ12.7 (1/2") Pipeφ12.7 (1/2") × 0.8 O/Uφ12.7 (1/2")
Gas line
: I/Uφ25.4 (1")
Brazing
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
R410A 7.2kg in outdoor unit (incl. the amount for the piping of : 30m)
Hose Connectable with VP25
IPXO
Outdoor air temperature
DB
WB
DB
19˚C
35˚C
20˚C
7˚C
FDU250VSVF
91
5 < Max.running current 27 >
52
—
92
—
—
—
—
—
φ22.22 (7/8") × 1.6
Max.70m
—
Necessary (both Liquid & Gas lines)
—
External static pressure of indoor unit
WB
24˚C
(With optional fan controller kit : U-FCRA)
6˚C
59
-
-
'12 • PAC-T-174
Adapted to RoHS directive
Outdoor unit FDC250VS
380-415V 3N~50Hz / 380V 3N~60Hz
Heating
28.0 [ 9.5 (Min.)~31.5 (Max.)]
8.50 / 8.22
14.4 / 14.7
85
Cooling : 57 Heating : 58
1,505 × 970 × 370
Stucco White
(4.2Y7.5/1.1) near equivalent
140
GTC5150ND70K × 1
Direct line start
1.45 M-MA32R
Straight fin & inner grooved tubing
Electronic expansion valve
Propeller fan × 2
86 × 2 < Direct line start >
Cooling : 150 , Heating : 145
0
—
—
Rubber sleeve (for Compressor)
—
33 (Crank case heater)
—
Internal thermostat for fan motor
Abnormal discharge temperature protection.
φ22.22 (7/8")
Liquid : Flare / Gas : Brazing
1.See page 154
—
Holes size φ20 × 3pcs
IPX4
Connecting pipe, Edging
Pa
100
PJD001Z 362
- Quick Links:
- Specifications
- Outdoor Units
- Outdoor Units
Hide quick links:
Chapters
Table of Contents
