Fender Passport PD-250 Instruction Manual
  1. Manuals
  2. Brands
  3. Fender Manuals
  4. Microphone system
  5. Passport PD-250
  6. Instruction manual

Fender Passport PD-250 Instruction Manual

Deluxe portable sound system
Hide thumbs Also See for Passport PD-250:
Table of Contents

Quick Links

See also: Service Manual
INTRODUCTION
250 Watts of Clear Stereo Sound
Custom Designed Loudspeakers Utilizing the latest in
High-Performance Speaker technology
Built-in Digital Reverb
VIP™ (Vocal Input Priority) Allows input one to
automatically override all other inputs when a signal is
present on input one
Four Mono Microphone / Line Inputs with XLR and
1/4" balanced inputs connections
Two Stereo Inputs with 1/4" and RCA Connections
Switch Mode Power Supply Allows Use Anywhere In
The World
Everything You Need To Get Started:
– Passport Mixer Amplifier
– Two Dynamic Microphones & Cables
– Two Speaker Cables, 9m (30')
– IEC Power Cable
– Two, State of the Art, Full-Range Speaker
Enclosures
– Full transportation enclosure
This symbol warns the user of dangerous
voltage levels localized within the enclosure.
This symbol advises the user to read all
accompanying literature for safe operation of
the unit.
Fender Passpor
Fender Passpor
Deluxe Por
Deluxe Por
t PD-250
t PD-250
table Sound System
table Sound System
Congratulations on your purchase of a Fender Passport
PD-250 high performance, self-contained portable audio
system. Your Passport includes everything you will need
for great sound... Anywhere.
Carry your Passport as you would a large sized suit case.
Flip open the speaker latches, and you'll discover two full-
range speaker cabinets, a powered mixer, dynamic
microphones, plus all the cables you need to get started.
Use your Passport to amplify voices, musical instruments,
computer sound cards, CD's, tape playback and more.
Passport's quick and easy set-up, its ability to cover large
audiences and simple operation are the hallmarks of this
innovative product line.
The Passport's control panel features four mono mic/line
inputs and two stereo channels (six channels total). The
stereo input channels can be used for either mono or
stereo operation allowing superb flexibility in input use.
Moreover, the revolutionary speaker technology in each
speaker enclosure deliver remarkably clean, full range
sound with exceptional audience coverage and
remarkable feedback rejection. The self-powered mixer
provides a total of 250 watts of high quality stereo sound.
For vocal operation, the Passport's VIP (Vocal Input
Priority) feature can be used to reduce or "duck" the
background music level as you begin to speak and then
restore your background music when you have finished
speaking. Experiment with the tone controls, digital reverb
and speaker placement and discover the Passport's
incredible power and versatility.
IMPORTANT SAFEGUARDS:
– WARNING : TO PREVENT DAMAGE, FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
– NO USER SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
– THIS UNIT MUST BE EARTH GROUNDED.
3
Table of Contents
loading

Related Manuals for Fender Passport PD-250

Summary of Contents for Fender Passport PD-250

  • Page 1 Deluxe Por table Sound System INTRODUCTION 250 Watts of Clear Stereo Sound Congratulations on your purchase of a Fender Passport PD-250 high performance, self-contained portable audio Custom Designed Loudspeakers Utilizing the latest in system. Your Passport includes everything you will need High-Performance Speaker technology for great sound…...

  • Page 2: Transportation Latches

    This check must be performed before connecting the power cable. The Fender Passport has two range settings: 115 V or 230 V. Failure to select the appropriate voltage range will cause the unit to go into protect mode, void any warranty and may cause damage to the unit.

  • Page 3: Mono Mic/Line Control Functions

    MONO MIC / LINE CONTROL FUNCTIONS CHANNNELS 1 - 4 performance where appropriate and desired. In the full left position there is no level sent to the reverb processor or Rev/Aux jack. Care should be taken to set the Reverb return master control to a middle position or above, before adjusting levels from the individual channels.

  • Page 4: Master Control Functions

    M. REV/AUX – Adjusts the amount of signal sent to the The overall reverb level to the MAIN mix is controlled by internal Reverb processor, and to the Rev/Aux output the Reverb Master Control. jack. In the full left position the control is effectively off. Q.

  • Page 5: Aux And Footswitch Jacks

    EE. FOOT SWITCH – The Footswitch connector allows the internal reverb return to be muted, or shut off, through the use of a simple foot operated switch (Fender part number 099-4052-000). The footswitch should be wired to connect the tip to the sleeve to turn the reverb off, and requires a standard speaker or instrument cable.

  • Page 6: Rear Storage Compartment

    Power LED continues to glow red this indicates a fault with your system and you should consult an authorized When setting up, be sure to follow these simple set-up Fender service center. guidelines: If no audio is present in one of the speakers, check to see 1.

  • Page 7: Specifications

    3. Consider the application and needs of the SPECIFICATIONS event and set the System EQ control as appropriate. This is best achieved by playing Part Number recorded material of the same type as your 069-2001-0X3 show program, or by having an assistant speak Frequency Response into the microphone while you listen in the 20 Hz to 40 kHz ±...

  • Page 9: What Is Covered In This Manual

    Thank you for selecting the Fender Passport Wireless System. Before installing or operating this system please read this instruction manual thoroughly and familiarize yourself with the system components and correct operating procedures. What is covered in this manual Descriptions, installation and usage for the Passport Wireless Handheld System, Passport Wireless Executive System and Passport Docking Receiver are covered in this manual.
  • Page 10 Headset Microphone This microphone is essentially of the same type as the lavalier microphone. Fender’s design features a number of advantages for entertainment and presentation applications. The Fender headset system can be worn securely and comfortably even when used by physically active performers or instructors.
  • Page 11 A second advantage to this tone key system is that the transmitter can be turned on and off without having to turn off the receiver – or mute its channel on the Passport.

  • Page 12: Pre-Installation

    Passports have nothing in their storage compartments. If you have purchased a wireless system and find you’re Passport does not have the “wireless ready” feature, please contact your Authorized Fender Pro Audio dealer or our Customer Service department for information and availability of a “wireless retro-fit kit”. This kit will need to be installed by an Authorized Fender Pro Audio Service Center.

  • Page 13: Operation

    Adjust the EQ control to your requirements. Note: The front panel Mic/Line switch does not effect the level sensitivity for Wireless operation. Fender has “normalized” the docking receiver’s output to the system-input section.

  • Page 14: Wireless System Specifications

    >100dB Squelch Tone Key squelch controlled circuitry S/N Ratio >100dB T.H.D. < 0.5% Freq. Response 50Hz-18kHz +/-3dB Product Specifications are subject to change without notice. www.fenderaudio.com www.fender.com Please visit A Product of: Fender Musical Instruments Corp. Corona, CA 91720 USA...

Table of Contents