Table of Contents
VSS7915/00T & VS79155T | Installation Instructions
3. Installation
To obtain the best results from your new Eazeo Outdoor Video
Intercom, read these instructions carefully before use. Retain the
manual for future reference.
This manual describes the installation of the Eazeo Outdoor Video
Intercom. For more detailed information about the installation and
operation of the system monitor you should consult the monitor
manuals.
Remark: When the system configuration is altered, the system
monitor needs to check and memorise the cameras and accessories
connected to its inputs. This is done automatically when the mains
power is switched on (rear switch).
Position
First you need to determine where the intercom is to be installed. The
image sensors in modern CCD cameras are highly sensitive and
require special care for proper performance and extended lifetime.
Please follow the guidelines to get optimum results of your camera:
•
Do not expose to direct sunlight or bright spotlights in operating
and non-operating conditions.
•
Avoid bright lights in the field of view of the camera.
These bright lights cause a smearing effect, which is visible as white
lines above and below the highlight. Bright lights may cause
bleaching of the sensor's color filters. This will be visible as colored
spots in the picture and is irreversible.
Mounting the unit
Choose from the available mounting methods:
•
Sunken mount
•
Raised mount
Bosch Security Systems | 2003-11
EN | 4
Table of Contents
