Holiday Mode; Dry Concrete Function - Panasonic WH-MDC05F3E5 Service Manual
Hide thumbs
Also See for WH-MDC05F3E5:
- Operating instructions manual (100 pages) ,
- Service manual (19 pages) ,
- Design handbook (132 pages)
Table of Contents
12.19 Holiday Mode
Purpose:
Promotes energy saving by allowing the user to stop the system during holiday and enables the system to
resume at the preset temperature after holiday.
Control details:
Range of days can be set in holiday mode is from 1 to 999 days.
o
After days of holiday have been set, heat pump will stop and only resume operation at 12.00am at the
o
end of holiday countdown.
Start condition:
Unit is OFF and holiday mode is set.
o
* The day the holiday mode was set is counted as day 1.
Stop condition:
OFF/ON button is pressed.
o
Holiday counter is reached.
o
12.20 Dry Concrete Function
Purpose
Provide heat to floor heating panel and dry the wet concrete during installation.
Setting condition:
Dry concrete parameter can be set through control panel by selecting dry concrete menu.
o
Parameters are possible to set up to 99 days with different target set temperature.
o
Control details:
Dry concrete operation can be activate under Service Mode 3.
o
Once dry concrete function start, day 1 setting temperature will be send to indoor unit by control panel.
o
Unit will operate heat mode with dry concrete preset water outlet temperature. (No shift value added to
o
the preset water outlet temperature)
After complete day 1 setup operation, day 2 data will be send to indoor at 12.00am on the second day.
o
Each preset data will be send everyday until dry concrete mode is complete, unit will turns OFF and exit
o
dry concrete function.
3 ways valve and booster heater will turn OFF and 2 ways valve will turns ON.
o
Cancel condition:
Unit will turns OFF and exit dry concrete function.
o
OFF signal is received by pressing OFF/ON button or error H76 is occurred.
o
75
- Quick Links:
- Specifications
- Wh-Mdc05F3E5
Hide quick links:
Table of Contents
