Page 2
Before reading this manual This is a basic operation manual for installation and use of an IDIS network camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
Before reading this manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1.
• Slow shutter support for improved low-lighting video You can use the IDIS Discovery program to change capture performance network camera settings or the IDIS Solution Suite • Day & Night feature (built-in IR cut filter changer) Compact program to manage multiple network cameras.
Part 1 – Introduction Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. External appearances and colors of the accessories may vary depending on the model. Network Camera Mounting Bracket Camera Sun Shield DC Adapter (12V) Operation Manual CD Quick Guide...
Part 1 – Introduction Overview Product color and design may vary depending on the model. Body 1 Lens Optical zoom lens is installed. 2 IR LED A sensor in the bottom middle monitors lighting levels and activates the IR LED during low-lighting conditions.
For more information on network connection setup, refer to the IDIS Discovery operation manual, 6 Alarm Out Connect an alarm-out device to the NO (Normally Open) and COM (Common) connectors.
Factory Reset This will only be performed remotely on the rare occasions that you want to return all settings to the original factory settings. Refer to the IDIS Discovery operation manual for details on remote factory resetting. A factory reset will clear all camera settings configured by the user.
Part 2 - Camera Connection Use the camera by connecting to DirectIP™ NVR or non DirectIP™ NVR, VMS such as IDIS Solution Suite Compact. With DirectIP™ NVR-based Layout DC-T1232WR model Power Network Camera Power VGA/HDMI Monitor Out IDIS Center Remote Monitoring...
Page 13
Camera VGA/HDMI Power Monitor Out IDIS Center Remote Monitoring DirectIP NVR makes it easy to use cameras without extra network configurations. Each camera can be controlled via the DirectIP™ NVR setup menu, without any PC. For detailed camera settings, please see the camera setting pages of DirectIP™ NVR manual.
Part 2 - Camera Connection With non DirectIP™ NVR-based Layout DC-T1232WR model Network Camera Network Remote Monitoring (IDIS Solution Suite Remote Recording Compact or IDIS Web) (IDIS Solution Suite Compact) DC-T1234WR model Alarm Out Network Camera Network Remote Monitoring Remote Recording...
Page 15
Control the camera over the network from software installed on a computer. Ideal for using the camera over the network from a remote location. The contents after page 13 are only for users using the camera with non DirectIP™ NVR connection or VMS connection such as IDIS Solution Suite Compact.
Configure basic network camera settings and all other system settings. Screen images may vary depending on the model. Launch the IDIS Discovery program and then from the main screen select a network camera whose protocol you wish to change. Camera Protocol...
Part 3 - Remote Setup System Change the camera's system information, add users/ groups, and/or import/export settings. From the Remote Setup screen, select the menu on the left to display the current settings. General Select an option under the menu to change the corresponding settings.
Part 3 - Remote Setup • Miscellaneous Date/Time - ONVIF Protocol: Select to enable ONVIF protocol use. However, ONVIF Protocol is available only to users belonging to the standard user groups (Administrator, Operator, and User). • Setup - Load Default Setup: Restores all settings other than Date/Time to their factory defaults.
Part 3 - Remote Setup User/Group • User/Group settings can only be configured by users belonging to the Administrator group. • There is no default password for the Administrator group's admin user. • Standard groups (Administrator, Operator, and User) cannot be edited or deleted. Authorities assigned here apply identically to ONVIF protocol user groups.
Part 3 - Remote Setup IP Address Select Use FEN to enable the FEN feature. • Type: Select the type of network you are using. If this option has been changed, Remote Setup will • FEN Server: Enter the FEN Server's IP address or terminate after applying the current settings.
• You will not be able to save FEN settings unless you click on the OK button next to the Camera you will be able to use the IDIS Web program or Name field and check the entered name's a media player that supports RTSP (Real-Time availability.
Page 22
Click Apply to use the recommended port numbers. Port Number/ (If Use HTTPS has been enabled, enter https instead of http). Camera's IDIS Web port number and RTSP port number must be configured correctly in order to establish a connection this way.
Part 3 - Remote Setup Bandwidth Control Security Regulates the camera's network bandwidth use based on network traffic fluctuations. • IP Filtering: Select this option to enable IP Filtering. IP Filtering allows camera access from certain IP addresses and blocks access from others. Select Network Bandwidth limit and then specify the maximum bandwidth.
Part 3 - Remote Setup Video IEEE 802.1X Select the IEEE 802.1X option to enable IEEE 802.1X network connection authentication. Configure Camera, Streaming, Webcasting, MAT, and Privacy Masking options. • Certificates: Upload a certificate or a private key. You may be prompted to enter a password for the private key.
Page 25
Part 3 - Remote Setup • Backlight Compensation: Enable/disable the • Manual: Adjust the white balance manually. Adjust Backlight Compensation feature. Red and Blue gain values. Greater the value, greater the intensity of the corresponding color. - OFF: Disables the BLC function. - ON: When images are too bright overall due to backlight, objects are exposed brighter under Exposure...
Page 26
Part 3 - Remote Setup • Shutter Speed Control: Adjust Shutter Speed. Miscellaneous This option is available only when Anti-Flicker and Configure Miscellaneous settings. Slow Shutter are both set to Off. - Auto: The system will assess the lighting conditions and adjust the shutter speed automatically.
Part 3 - Remote Setup Streaming • Default Record Stream: Choose a stream to use for recording. This setting, however, may not apply if a recording stream has been designated from the remote program. • Multi-View Streaming: Designate a specific area of the screen and stream images from that area only.
Part 3 - Remote Setup Webcasting Use the webcasting service to view live images from Select the MAT option to use the MAT (Motion the camera on a web site. Adaptive Transmission) feature during video transmission and recording. • HTML Code: Copy and paste the html code shown on the screen within the code of the web page you •...
Part 3 - Remote Setup Audio Privacy Masking Select Privacy Masking to set up a privacy mask DC-T1233WHR model only over a specific area. The section on which a privacy Configure audio in/out settings. mask is applied will appear as black when monitoring video.
Alarm-out DC-T1234WR model only Designate event detection alert actions. Select Alarm Out to enable alarm out. DC-T1232WR model • Dwell Time: Designate the alarm out duration. When an event occurs, alarm out will be generated DC-T1234WR model for the specified duration.
Select Email to send out emails. Select Remote Callback to send callback messages to a remote system. • Not supported from the IDIS Web program. • The camera must be registered to the remote system in order to use the Remote Callback feature.
Part 3 - Remote Setup Audio Alarm FTP Upload DC-T1233WHR model only Select FTP Upload to upload .jpg image of the event detected to an FTP server. Select Audio Alarm to generate audio. • FTP Server: Click Add to register a new FTP •...
Select Add Sequence Number Suffix - max. Count to DC-T1232WR model number the image files based on the order of event detection. Select Overwrite to overwrite the previous image with the new image. Event type is automatically added to the file names.
Page 34
DC-T1233WHR model which system to send the message to. • Not supported from the IDIS Web program. • The camera must be registered to the remote system in order to use the Remote Callback feature.
Select Trip-Zone to configure trip zone event settings. With trip zone event enabled, motion detected inside/ outside the selected area will be assumed as an event. DC-T1232WR model • Sensitivity: Select daytime and nighttime motion detection sensitivity levels. Higher values will result in more sensitive motion detection.
Event Action must be configured correctly in order to send out emails and messages. • Remote Callback is not supported on IDIS Web. • The camera must be registered to the remote system in order to use the Remote Callback...
– Tools → Internet Options → Advanced → Security → Use TLS 1.0 (select) • If connecting by entering an IP address and a port number, you can connect by entering just the IP address if IDIS Web connection port number has been set to 80 (443 when entering https).
Page 40
® • If running IDIS Web on Internet Explorer 7.0, the bottom section of the screen may get cut off if the address bar or the status bar is shown. In this case, change Internet Options so that the address bar or the status bar is hidden.
2013-05-29 16:25:22 Press to terminate IDIS Web. Place the mouse pointer on the logo to check IDIS Web's version. TYPE 1 Displays the current time. Click to view the video in full screen. Press the ESC key on the keyboard to return to the previous screen.
Page 42
Part 4 - IDIS Web Click to control the alarm out device connected to the camera. DC-T1234WR model only Event status window at the bottom of the screen displays a list of events detected at remote locales. TYPE 1 TYPE 1...
Part 5 - Appendix Setup Menu Tree (Remote Setup) DC-T1232WR model DC-T1234WR model Remote Setup Remote Setup Quick Setup Quick Setup System System Network Network Video Video System System General General Date/Time Date/Time User/Group User/Group Network Network IP Address IP Address...
Part 5 - Appendix Setup Menu Tree (Remote Setup) DC-T1233WHR model Remote Setup Quick Setup System Network Video Audio System General Date/Time User/Group Network IP Address Port/QoS Bandwidth Control Security IEEE 802.1X Video Camera Streaming Webcasting Privacy Masking Audio In/Out Event Action Email Remote Callback...
Unable to launch IDIS If the IDIS Web login screen is not loading, check which version of Microsoft Web. Internet Explorer you are using. IDIS Web may not launch properly on versions 6.0 or below.
> 31.2 dB Dynamic Range > 74.7 dB (Digital WDR) Electronic Shutter Auto IR LED DC-T1232WR / DC-T1233WHR models LED x 42 (850 nm) DC-T1234WR model LED x 24 (850 nm) White LED* LED x 6 Lighting Sensor Supported IR Range...
Page 47
Part 5 - Appendix Audio Compression Algorithm* G.726 (16KHz), G.711 μ – Law (8KHz) * It is supported for the DC-T1233WHR model only Video Out* 1 Composite, 1 Vp-p Audio In** 1 Line In Audio Out** 1 Line Out Alarm Out*** 1 relay out, NO only, 0.3A @ 125 VAC, 1A @ 30 VDC Network Connection 10/100 Mbps Ethernet...
Part 5 - Appendix Index ONVIF Protocol Admin/Watch/Recording/Search Ports Quality Bitrate Control Resolution RTSP Port Camera Name Compression Date/Time Time Sync DSCP Use FEN FEN Server Use HTTPS Frame Rate User/Group Use UPnP IDIS Web Port IPFiltering Network Bandwidth Limit Ver. 1.1...
Page 49
IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...