Audio Induction Loops - Siemens Insio 2 binax User Manual

Table of Contents
Available languages

Available languages

Automatic program switch (AutoPhone®)
Your hearing instrument can automatically select the
telephone program when you bring the telephone
handset close to the hearing instrument. When you are
finished speaking on the phone, move the handset away
from the hearing instrument and microphone mode will
re-set itself.
If you want to use this function, ask your Hearing Care
Professional to do the following:
Activate the AutoPhone function.
Check the telephone receiver's magnetic field.
For the automatic program switch, your hearing
instrument detects the telephone receiver's magnetic
field. Not all telephones produce a magnetic field
strong enough to activate the AutoPhone function. In
this case, you can use the Siemens AutoPhone magnet,
which is available as an accessory, and attach it to the
telephone receiver.
See the AutoPhone magnet user guide for instructions on
how to position the magnet.
NOTICE
Use the approved AutoPhone magnet only. Ask
your Hearing Care Professional for this accessory.
20

Audio induction loops

Some telephones and public places like theatres offer the
audio signal (music and speech) via an audio induction
loop. With this system, your hearing instruments can
directly receive the desired signal – without distracting
noise in the environment.
You can usually recognize audio induction
loop systems by certain signs.
Whether a telecoil is built into your hearing instrument is
listed in section "Settings". If a telecoil is built in, you have
the following options.
Ask your Hearing Care Professional to configure a telecoil
program.
Switch to the telecoil program whenever you are in a
X
place with an audio induction loop.
If a telecoil program is configured for your hearing
instruments, it is listed in section "Settings".
Telecoil program and remote control
NOTICE
For instruments with wireless connectivity:
When the telecoil program is active, the remote
control may cause a pulsing noise.
Use the remote control with a distance greater
X
than 4 inches (10 cm).
21

Hide quick links:

Chapters

Table of Contents
loading

This manual is also suitable for:

Orion 2Intuis 2Sirion 2

Table of Contents