1. Manuals
  2. Brands
  3. ArcVision Manuals
  4. Security System
  5. ARC19020
  6. User manual

ArcVision ARC19020 User Manual

Hide thumbs
Table of Contents

Quick Links

0. CONTENTS ...................................................................................................................................................................................... 1
1. INTRODUCTION AND FEATURES .......................................................................................................................................... 2
1.1 Product Introduction ............................................................................................................................................................... 2
1.2 Product Features ..................................................................................................................................................................... 2
2. INSTALLATION ........................................................................................................................................................................... 3
2.1 System Installation Diagram................................................................................................................................................... 3
2.2 Installation Procedures ........................................................................................................................................................... 3
2.3 Illustrate of installation procedures......................................................................................................................................... 4
3. OPERATING INSTRUCTIONS .................................................................................................................................................. 7
3.1 Introduction of the MASTER CONTROL panel.................................................................................................................... 7
3.2 Operating instructions............................................................................................................................................................. 9
3.2.0 　Power On Reset and System Self-Test........................................................................................................................ 9
3.2.1 　NORMAL DISPLAY MODE..................................................................................................................................... 9
3.2.2 　SEQUENCE MODE ................................................................................................................................................. 10
3.2.3 　PLAYBACK MODE ................................................................................................................................................ 10
3.2.4 　SYSTEM SETUP...................................................................................................................................................... 10
3.2.4.1 　SYSTEM SETUP DESCRIPTION..................................................................................................................... 10
3.2.4.2 　DATE/TIME SETUP.......................................................................................................................................... 11
3.2.4.3 　DISPLAY SETUP .............................................................................................................................................. 12
3.2.4.4 　TITLE SETUP .................................................................................................................................................... 13
3.2.4.5 　CONTRAST SETUP .......................................................................................................................................... 14
3.2.4.6 　AUTO SEQUENCE SETUP .............................................................................................................................. 14
3.2.4.7 　MOTION SETUP ............................................................................................................................................... 15
3.2.4.8 　Picture In Picture SETUP ................................................................................................................................... 16
3.2.4.9 　ALARM LIST .................................................................................................................................................... 17
3.2.4.10　LOAD DEFAULT .............................................................................................................................................. 17
4. WARNING.................................................................................................................................................................................... 17
5. SPECIFICATIONS ...................................................................................................................................................................... 19

REVISION HISTORY

Version 1.1 Created on 01/10/03 by Po-Kai Shao from:
1) Version 1.0 from Po-Kai Shao, 01/06/14.
2) Added operation instructions for additional remarks of WARNING by Po-Kai Shao 01/07/24.
3) To correction for lapse of the pen by Po-Kai Shao, 01/07/23.
4) Edits to various sections by Shu-Gi Ling 01/10/03.

CONTENTS

1
2001/10/03 Version: 1.1 No: 040050
Table of Contents
loading

Summary of Contents for ArcVision ARC19020

  • Page 1: Table Of Contents

    2001/10/03 Version: 1.1 No: 040050 CONTENTS 0. CONTENTS ...................................... 1 1. INTRODUCTION AND FEATURES ............................2 1.1 Product Introduction ................................2 1.2 Product Features ..................................2 2. INSTALLATION ................................... 3 2.1 System Installation Diagram..............................3 2.2 Installation Procedures ................................3 2.3 Illustrate of installation procedures............................

  • Page 2: Introduction And Features

    1. INTRODUCTION AND FEATURES 1.1 Product Introduction This surveillance kit can be installed in many different places (such as homes, shops, offices, ... etc.). It is designed with 4 objectives：Economical, Complete Functions, Installs Easily, and User Friendly. 1.2 Product Features An economic solution for home, shop or building surveillance system.

  • Page 3: Installation

    INSTALLATION 2.1 System Installation Diagram VCR IN QUAD OUT VIDEO IN 1~4 Camera 1 MONITOR OUT RELAY OUT / OPTIONAL Camera 2 POEWR IN Camera 3 Other Camera 4 ↑ ↓ ＋ － ENTER B ∕ W REAL-TIME Device QUAD AUTO PLAY MENU...

  • Page 4: Illustrate Of Installation Procedures

    External video signal input BNC This terminal represents the video signals input for type Terminal connecting to external VCR. from the VCR Video system EIA CCIR Both EIA and CCIR system machine, manual switchable. select switch CH4 video signal This terminal represents the video signals input for input BNC type connecting from external camera.
  • Page 5 Step 2: Illustration of the external video Cameras, Monitor and VCR. Please refer to figure as shown below. RELAY OUT VIDEO OUT VIDEO IN POWER IN Master COM/NO/NC MONITOR QUAD DC 12V 500mA EIA CCIR Controller Camera 1 Monitor Camera 2 Camera 3 Camera 4 Step 3: You can skip this step if it is not necessary to control other equipment by the...
  • Page 6 Illustration of a CCTV／VCR setup. Moreover, this "RELAY OUT" port also can be used to control devices such as security main controller, auto-dialling machine, etc. O U T L A Y "External Start Record" connector on the VCR Step 4: Plug the end of the power adaptor into the "DC IN" socket and plug the other end into the AC power socket as shown below.

  • Page 7: Operating Instructions

    Step 5: To disconnect RELAY OUT terminal wires, Please follow the instructions below： Use slot (—) type screwdriver and insert it into the orange colored release button at the top of terminal connectors. And then push upward. Pull terminal wires out. 3.
  • Page 8 Mode AUTO Seq. PLAYBACK Normal Mode FREEZE MENU Mode Mode Mode Light AUTO LED light QUAD LED flash PLAY LED light MENU LED light AUTO LED light AUTO LED dark Enter to AUTO Disengage from Sequential mode. AUTO Sequential mode. AUTO 1 LED light AUTO LED dark 1 LED light or dark...

  • Page 9: Operating Instructions

    3.2 OPERATING INSTRUCTIONS 3.2.0 Power On Reset and System Self-Test. After the Power is on for reset, the ‘SYSTEM SELF TEST’ will be shown on the monitor. CCIR SYSTEM SYSTEM SELF TEST SELF TEST Figure 1A：EIA system self-test message . Figure 1B：CCIR system self-test message.

  • Page 10: Sequence Mode

    3.2.2 SEQUENCE MODE. ● Press the［AUTO］key to enter AUTO SEQUENCE mode, which also turns on the AUTO LED. Processor will automatically be changed to the image, interval time and channels previously set. Under AUTO SEQUENCE MODE, when no sequence are set, the "NO SEQUENCE SETTING" message will be shown on the monitor.

  • Page 11: Date/Time Setup

    [ MAIN MENU ] System set-up Main menu. @ DATE/TIME SETUP Date∕Time display set-up menu. DISPLAY SETUP Image quality set-up menu. TITLE SETUP Channel title set-up menu. Contrast set-up menu. CONTRAST SETUP Automatically sequence set-up menu. AUTO SEQUENTIAL SETUP Motion set-up menu. MOTION SETUP Picture In Picture display set-up.

  • Page 12: Display Setup

    《＋》 《＋》 《＋》 YY∕MM∕DD MM∕DD∕YY DD∕MM∕YY 《－》 《－》 《－》 Figure 5. The DATE formats select rolling mapping. ● DATE range：Year data form 2000 to 2099, Month data from 01 to 12, Day data from 01 to 30. ● TIME format：HH：MM：SS for display, Hour data from 00 to 23, Minute data from 00 to 59, Second data from 00 to 59.

  • Page 13: Title Setup

    ● If MONITOR OUT BORDER LINE is set “ON”, the borderline will be shown on the MONITOR OUT display. ● If QUAD OUT BORDER LINE is set “ON”, the borderline will be shown on the QUAD OUT display. ● BORDER LINE WIDTH - adjustable range is from 0～3. ●...

  • Page 14: Contrast Setup

    Under PIP mode, the title for channel 2 will change position automatically and be shown on the RIGHT TOP, title for channel 3 will be shown on the LEFT BOTTOM and title for channel 4 shown on the RIGHT BOTTOM! If the DATE/TIME location was previously set on the LEFT TOP, When under FULL SCREEN DISPLAY, the title will be shown on the LEFT BOTTOM! 3.2.4.5 CONTRAST SETUP.

  • Page 15: Motion Setup

    2. When no sequence are set on the AUTO SEQUENCE MODE, It will display “ NO SEQUENCE SETTING＂on the monitor, thus alerts the buzzer alarm, the processor will automatically change to NORMAL mode after 5 seconds. 3. When switching intervals are all set to “0”, the“NO SEQUENCE TIME SETTING＂message will display on the monitor, thus alerts the buzzer alarm, the processor will automatically change to NORMAL mode after 5 seconds.

  • Page 16: Picture In Picture Setup

    System Motion detection windows X position limit Y position limit 12～60 14～50 Window 1 80～130 14～50 Window 2 12～60 70～104 Window 3 80～130 70～104 Window 4 8～60 16～64 Window 1 80～130 16～64 Window 2 CCIR 8～80 84～130 Window 3 80～130 84～130 Window 4 Table 1.

  • Page 17: Alarm List

    3.2.4.9 ALARM LIST. [[ ALARM LIST ]] CH AT DATE TIME P01======================== 01 MD 2001/01/01 10:23:50 02 VL 2001/01/01 09:01:14 This menu is read only！ Figure 13 : Alarm list. ● P01～P10：Alarm list page number. ● 01～60：Alarm number. ● CH：Active channel. ●...
  • Page 18 3. Keep the unit under ventilation. Don’t put anything on the top of this processor. Do not expose it to extreme moisture please turn off the power and send this processor to a repair center. 4. Please do not use any accessories that not supported by us. It is strictly prohibited to insert any other plug into DC IN socket, please use the specified DC12V±5%∕500mA power adapter.

  • Page 19: Specifications

    5. SPECIFICATIONS (Note: Design and specifications are subject to change without prior notice.) Video Input Ports 4 Cameras. Picture Refresh Rate EIA：60 Fields∕sec；CCIR：50 Fields∕sec Video Format EIA or CCIR Monochrome video signal. Video Input 4 BNC connectors. 75Ω Loaded. Video Output 2 BNC connectors.

Table of Contents