Quick Links
GUARANTEE
The product is guaranteed for one year from the date of purchase against faulty
materials and workmanship. No liability can be accepted for any problems caused by
fair wear and tear, buyer's negligence, improper fitting or use, wilful or accidental
damage, or any consequential loss or damage howsoever caused. This guarantee
does not affect your statutory rights and is valid for UK and EIRE only.
If you believe the product to be faulty or in the unlikely event of the product developing
a fault during the warranty period, then please contact our Technical Support Team
(contact details shown below) for product assistance. Product repair or replacement
will be offered for faulty products only with our prior agreement. Should you need to
return a product then:
1.
Contact the Helpline on the number below to obtain a Return Authorisation
Number.
2.
Return your product adequately packaged, ideally in its original packaging
to prevent damage in transit, and include the following:
a.
A copy of your original invoice/receipt
b.
A covering letter giving your full contact details, including email
address (if Applicable)
c.
A description of the fault or problem
Disposal and Recycling
Disposal of this product is covered by the Waste Electrical or Electronic Equipment (WEEE)
Directive. It should not be disposed of with other household or commercial waste.
At the end of its useful life the packaging and product should be disposed of via a suitable
recycling centre. Please contact your local authority or the retailer from where the product was
purchased for information on available facilities.
Response Electronics Limited
Roman House, Lysons Avenue, Ash Vale, Surrey, GU12 5QF
MGA8_V2_1424
miGuard is a trademark of Response Electronics Limited
Wireless Communicating
Burglar Alarm
A8
Instructions
miGuard Customer Helpline
0345 257 1000
lines open 0900 to 1700 Monday to Friday
www.responseelectronics.com
Related Manuals for Response Electronics miGuard A8
Summary of Contents for Response Electronics miGuard A8
-
Page 1: Burglar Alarm
Please contact your local authority or the retailer from where the product was purchased for information on available facilities. lines open 0900 to 1700 Monday to Friday Response Electronics Limited Roman House, Lysons Avenue, Ash Vale, Surrey, GU12 5QF www.responseelectronics.com MGA8_V2_1424 miGuard is a trademark of Response Electronics Limited... - Page 12 PSTN Security Alarm System 433MHz ABS Plastic Input: AC 110-240V/50-60Hz Temperature: -10°C ~ 55°C Output: DC 12V/500mA Humidity ≤ 80% (non-condensing) 25mA 125 x 123 x 35mm 260mA 7.4V/500mAh battery pack 60dB 60 PCS in total (including Wireless Remote Control)
- Page 13 The Door/Window Sensor can be fitted to doors, windows or any other object that opens and closes. The Sensor transmits a signal to the Control Panel when ‘contact’ is broken between the Magnet and the Transmitter (when opening a door, for example). External input for a Wired Accessory is available at the N/C interface.
- Page 15 DC 1.5V (AA 1.5V LR6 Battery x 1pc) ≤ 30uA ≤ 40mA ≤ 80m ﴾in open area﴿ 433 MHz ABS Plastic -10°C ~ 55°C Up to 80% (non-condensing) 71 x 34 x 17.5mm 51 x 12 x 13.5mm...
- Page 18 DC 3V (AA 1.5V LR6 Battery x 2pcs) ≤ 50uA ≤ 9.5mA 8m/110° ≤ 80m (in open area) 433MHz ABS Plastic Temperature: -10°C ~ 55°C Humidity ≤ 80% (non-condensing) 108 x 52 x 36.8mm 52 x 30 x 26.5mm...