Networking - Virtual Server - Motorola WR850G User Manual

Motorola wireless broadband router user guide

Hide thumbs Also See for WR850G:

Table of Contents

CONFIGURATION

Outgoing Protocol: From the drop down box, select either TCP or

UDP.

Outgoing Port: Enter the From and To ranges (0 to 65535) for

your application.

Trigger Inbound Protocol: From the drop down box, select either

TCP or UDP.

Incoming Port: Enter continuous value(s) (0 to 65535), separated

by dashes, for your application. You can also enter multiple

non-continuous values, separated by semicolons.

Idle Time: Enter the elapsed time before the Port Trigger mapping

closes for all of the listed entries.

To edit or remove an entry, select it and then click Edit or Remove to

perform the action.

Networking - Virtual Server

The Virtual Server sets up an automatic inbound forwarding

mechanism for services running on your computer, such as web

servers, email servers, or other specialized applications. When you

use this service, it is suggested that you use Static IP and not DHCP,

because the DHCP server may change the IP address during usage.

You may use DHCP and then reserve the IP address.

The table below lists the current Port Forwarding rules. To access the

screen, click Networking > Virtual Server. Click Apply to save your

settings or Cancel to cancel changes.

SECTION 3, CONFIGURATION

SECTION 3

3-35

Table of Contents