Configuring A Portal Web Server; Enabling Portal Authentication On An Interface - HP 5920 Series Configuration Manual
Hide thumbs
Also See for 5920 Series:
- Command reference manual (607 pages) ,
- Configuration manual (322 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Step
3.
Specify the IP address of
the portal authentication
server.
4.
(Optional.) Configure the
destination UDP port
number used by the device
to send unsolicited portal
packets to the portal
authentication server.
Configuring a portal Web server
A portal Web server pushes the authentication page to users during portal authentication. It is also the
Web server to which the device redirects user HTTP requests.
Perform this task to configure the following portal Web server parameters:
VPN instance of the portal Web server
•
URL of the portal Web server
•
Parameters carried in the URL when the device redirects the URL to users
•
The device supports multiple portal Web servers.
To configure a portal Web server:
Step
1.
Enter system view.
2.
Create a portal Web server
and enter its view.
3.
Specify the VPN instance to
which the portal Web server
belongs.
4.
Specify the URL of the portal
Web server.
5.
Configure the parameters to
be carried in the URL when the
device redirects it to users.
Enabling portal authentication on an interface
You must first enable portal authentication on an access interface before it can perform portal
authentication for connected clients.
Command
•
To specify an IPv4 portal server:
ip ipv4-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
•
To specify an IPv6 portal server:
ipv6 ipv6-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
port port-id
Command
system-view
portal web-server server-name
vpn-instance vpn-instance-name
url url-string
url-parameter param-name
{ original-url | source-address |
source-mac | value expression }
95
Remarks
Specify an IPv4 portal
authentication server, an IPv6
authentication portal server, or
both.
By default, no portal
authentication server is
specified.
By default, the UDP port number
is 50100.
This port number must be the
same as the listening port
number specified on the portal
authentication server.
Remarks
N/A
By default, no portal Web server is
created.
By default, the portal Web server
belongs to the public network.
By default, no URL is specified.
By default, no redirection URL
parameters are configured.
- Quick Links:
- Configuration Guide
- Configuring Local Users
Hide quick links:
Table of Contents
Troubleshooting
