Opening the device
Hydro module
5.2 Split systems: Hydro module
Danger!
1
Screws
2
Hooks
3
Raise
5 – 32
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
The work may only be performed by qualified or certified personnel .
Ensure that the entire power supply (e .g . power supply of the hydro
module, the storage tank, the electric immersion heater) is disconnected
before performing the steps below .
Removing the front panel
1
1
Remove two fastening screws from the bottom of the front panel and
➤
one from the front of the front panel .
Carefully pull the lower part of the front panel towards you, to release
➤
the front panel from the left and right hooks, and remove the front panel .
Reverse the procedure to assemble the device, ensuring that the right
➤
and left hooks snap into place correctly .
2
3