Table of Contents
Available languages
Available languages
Cordless Handset
Adjust the receiver volume by pressing the caller ID/vol (- or +) button.
There are four volume levels, and each press of the caller ID/vol (- or +)
button adjusts the receiver volume by one level. When the maximum or
minimum volume level is reached, the phone beeps twice.
Answering System
Adjust the speaker volume by pressing the speaker volume + and - buttons
on the base.
Speakerphone Operation
For best speakerphone performance, avoid the following:
• Areas with high background noise. (The microphone might pick up these
sounds.)
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or next to a
cabinet, which can generate an echo effect.
Note the following guidelines when using the speakerphone.
• Stay reasonably close to the phone so that you can be clearly heard by
the person to whom you are speaking.
• The SPEAKER indicator is on when the speakerphone is in use.
Receiving a Call with Speakerphone
1. When the phone rings, press and release the speaker/call back button on
the base, and speak normally, at a minimum distance of 8-9 inches, into
the built-in microphone.
2. Adjust speakerphone volume by pressing the speaker volume + and
- buttons on the base.
3. To end the call, press the speaker/call back button again.
Making a Call with Speakerphone
1. Press and release the speaker/call back button on the base, and wait for a
dial tone.
22
Chapters
Table of Contents
