MHP GJK 36 Series Assembly Instructions

GJK Assembly Instructions

Grill Assembly

Instructions

•

The GJK 36" Series Grill Model is almost

completely factory assembled.

•

Assembly is required for: The locking cast-

ers, side shelves, condiment holders, doors,

hole plugs, grates and briquets.

•

Please consult the Owner's manual for addi-

tional pertinent information regarding im-

portant general safety rules, maintenance,

troubleshooting, etc.

•

Leak test all gas connections before using.

•

Caution: Combustible material should never

be within 24 inches of the top, bottom, back

or sides of your MHP Gas Barbecue Grill.

Complete View of GJK Grill

Step 1: Locking Casters

The locking casters are packed with the side shelves.

Lift one end of the grill about 12 inches and block it so

it won't fall. Simply push the casters up into the corner

pocket brackets until they bottom out. Some resis-

tance will be felt so the casters may have to be tapped

up with a block of wood. They should also bottom out

when the grill is set back down. The casters are

locked when the foot tab is in the down position.

(See Fig. 1)

Step 2: Side Shelves

The side shelves are attached to the main cart with four

¼ - 20 X ½" bolts and split washers. Simply install one

(1) upper bolt (w/washer) loosely and let the shelf hang.

Then lift, pivoting the shelf while the remaining bolts and

washers are put in and tightened.

Step 3: Condiment Holders

Condiment Holders are attached to the front of the side

shelves using the two 10-24 x ½" Stainless Steel

Carriage Bolts and Kep nuts for each holder.

Fig. 2

Step 4: Attaching the Doors (

The doors simply drop onto the hinge pins. Hold the door

in the open position (straight out from the grill front) and

carefully match the hinge pins to the door hinges and

push down.

The bottom catch is magnetic, the top catch is a me-

chanical pull catch. On the inside of the right hand door

install the wire condiment holder using two (2) 10-24 x

½" bolts and nuts. Tuck the horizontal wire hooks behind

the door edge.

(See Fig. 2)

See Fig. 2)

Fig. 3)