Setting The Displayl; Setting The Displayc; Setting The Area Code; Etting The - GE 27936 User Manual

2.4 ghz cordless caller id with call waiting speakerphone
Table of Contents
Available languages

Available languages

There are six programmable menus available: Language, Contrast, Area
Code, Ringer Tone, Time and Default (Clock time is set from base only).
S
D

ETTING THE

This setting can be done from the base and handset.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button on the base or handset. 1 ENGLISH
2 ESPANOL shows in the display.
3. Press the CID (up or down arrow) button or the 1 or 2 number key.
4. Select the desired language.
5. Press the flash/program button to confirm.
NOTE: The language setting on the handset should match the language
setting on the base.
S
D
ETTING THE
1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button on the base twice. SET CONTRAST
shows in the display.
3. Press the CID (up or down arrow) button or the 1, 2, or 3 number keys.
4. Select the desired contrast.
5. Press the flash/program button to confirm.
NOTE: The contrast setting on the handset display is fixed and cannot
be adjusted.
S
A
ETTING THE
IMPORTANT: For proper Caller ID operation, you must enter your area code.
This setting can be set on the base and handset.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button on the base three times and press the flash/
program button twice on the handset. SET AREA CODE shows on the display.
L
ISPLAY
ANGUAGE
C
ISPLAY
ONTRAST
C
REA
ODE
11

Chapters

Table of Contents
loading

Table of Contents