Table of Contents
Available languages
Available languages
I
NSTALLATION
NOTE: For desktop charging
only, the handset is able to
charge facing up or down.
D
I
ESKTOP
NSTALLATION
1. Make sure the mounting bracket is securely fastened.
2. Place the handset in the base.
3. Plug the power supply cord into the base and then into an AC outlet.
The CHARGE indicator comes on indicating that the battery is charging.
When the battery is fully charged, the CHARGE indicator slowly blinks
and eventually goes out.
Allow the phone to charge for 12 hours before using the first
time. If you don't charge the phone properly (for 12 hours)
when you first set up the phone, perfomance of the battery will
be compromised.
4. After charging, connect the telephone line cord to the phone and then to
the wall phone jack.
5. Press the PWR button on the handset. Search is displayed. When Ready
is displayed the phone is ready for use.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the Thomson 5-2470 power supply that came with
this unit. Using other power supplies may damage the unit.
3
4
2
1
7
Chapters
Table of Contents
