Table of Contents
Switching on
the appliance
Switch on the appliance with the main
switch. Fig. 1/5
The temperature display flashes, Fig. 2/4,
until the appliance has reached the set
temperature.
Interior light in refrigerator compartment
is switched on when the door is open.
Operating tips
While the refrigerating unit is running,
beads of water or hoarfrost form at
the back of the refrigerator compartment.
This is quite normal. It is not necessary to
scrape off the frost or wipe off the beads
of water. The rear panel defrosts
automatically. The condensation flows
into the evaporation area of the appliance
via the condensation channels and
the drainage hole.
Selecting the
temperature
Fig. 2
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 4.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
Door warning signal
Switching off the door
warning signal
Fig. 2
Press the alarm button 1, to switch off the
warning signal.
The door warning signal switches on if the
appliance door is left open for longer than
two minutes.
Store food in the
appliance
Note the refrigeration
zones in the refrigerator
compartment!
The air circulation in the refrigerator
compartment produce different refrigerant
zones:
S Coldest zone
is between the arrow stamped on the
side and the glass shelf situated below,
Fig. 3.
Note
Store perishable food (e. g. fish,
sausage, meat) in the coldest zones.
S Warmest zone
is at the very top of the door and in the
lower vegetable container:
Note
Store e. g. cheese and butter in the
warmest zone. When served, the
cheese will not have lost its flavour
and the butter will be easy to spread,
Fig. 1/12.
en
21
Table of Contents
