Related Manuals for Monster SUPERCLEAN EZ2
Summary of Contents for Monster SUPERCLEAN EZ2
- Page 1 SUPERCLEAN FLOOR STEAMER INSTRUCTION MANUAL For Authentic Monster Replacement Parts Call 888-896-8786 Model #:...
- Page 2 I M PO R TAN T SAF E T When using an electrical appliance, basic safety precautions should always be observed, including the following: Read all instructions before using this appliance. WARNING: To reduce the risk of fire, electrical shock, or injury: 1.
- Page 3 E T Y I N S TR U C T I O N S 19. To reduce the likelihood of circuit overload, do not operate another high wattage appliance on the same circuit. Plug in to a standard (120V, 60Hz) electrical outlet. ATTENTION: This appliance is equipped with a 3-prong grounded power cord.
- Page 4 One (1) Floor Steamer 1 - Cord Winder 2 - Handle 3 - Metal Extension Tube 4 - Measuring Cup (pre-marked) 5 - Boiler Cap 6 - Steam Ready Indicator Light (green) 7 - Power Indicator Light (orange) 8 - Power Cord 9 - Steam Nozzles 10 - Clean Blast Tank Cover 11 - Hard Surface Floor Pad...
-
Page 5: Assemble Handle
Assembly of Parts & Preparation of Steamer Make sure all parts are in the box (see pg 4). IMPORTANT: FOLLOW THESE INSTRUCTIONS CAREFULLY! A. Assemble Handle • Remove Handle Assembly from carton (see below). • Place on a flat surface. •... - Page 6 B. Attach Handle to Steamer • Before starting, remove the self-tapping screw from the bottom of Extension Tube. • Insert the Handle Assembly into the Floor Steamer Base. Align Arrow on Handle with Arrow on Base (as shown in Fig. A). •...
- Page 7 C. Attach Hard Surface Floor or Carpet Pad to Steamer Affix either the Hard Surface Floor Pad or Carpet Glide with Carpet Pad to your Floor Steamer. WARNING: To prevent floor damage, ALWAYS attach either the HARD SURFACE FLOOR PAD or the CARPET GLIDE ACCESSORY with CARPET PAD when using your Floor Steamer.
- Page 8 D. Filling Boiler with Water WARNINGS: Carefully read all instructions before removing Boiler Cap. • Always unplug appliance before filling the Boiler. • *IMPORTANT* Use tap water – distilled or demineralized water if tap water is too hard. DO NOT add detergents, perfumes, oils or other chemical substances.
-
Page 9: Starting The Appliance
Using Your Floor Steamer A. Using the Parking Pad *IMPORTANT* The Parking Pad is provided to prevent floor damage that can result from leaving a hot steamer on the same spot for more than a few minutes. ALWAYS place Floor Steamer on the Parking Pad when not in use, or while it is cooling before storage. - Page 10 Boiler is empty. When this happens, refill with water per instructions (1D) or unplug and store unit. D. The Sanitizing System This Monster EZ2 Superclean Steamer is equipped with a unique on- demand option designed to sanitize your non-porous hard floor surfaces (sealed wood, tile, marble, granite, linoleoum, etc.).
- Page 11 • Use provided Measuring Cup to fill the Clean Blast Tank (Figs. “B” and “C”). Pour Clean Blast into Measuring Cup up to the “Clean Blast (Max)” 1 Cup marking. We recommend tilting the Steamer back when filling the Clean Blast Tank. Be careful 1/2 Cup not to overfill.
- Page 12 E. Refilling Boiler During Use WARNING: Let Steamer cool 10 minutes before opening Boiler Cap. Use care when opening Boiler Cap as it may still be hot and steam may escape, causing burns. If Boiler is still hot, water may spurt out during refilling which can also cause burns.
- Page 13 Cleaning and Rinsing Floor Steamer If distilled or demineralized water is regularly used there is no need to clean the Boiler. Rinsing the Boiler We reccomend you periodically rinse the Floor Steamer to prevent the accumulation of calcium and sediment caused by hard water use. After 10 - 15 uses, fill the Boiler 3/4 full with hot tap water, shake several times and empty out into sink or bathtub.
- Page 14 Issues Possible Causes Solutions Steam is not coming out of the Improper Handle assembly. Call Customer Service to receive instructions Steam Nozzles. to correct the problem (888-896-8786). The Hard Surface Floor Pad No enough pressure was Position Steamer about 2” above Pad and is not adhering to Steamer.
- Page 15 Notes...
-
Page 16: Limited Warranty
(as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. For Authentic Monster Replacement Parts, call 888.896.8786 EUROFLEX AMERICAS CUSTOMER SERVICE • 888.896.8786 EZ2 AA 10/30/09...