Yamaha TF5 Reference Manual page 29
Digital mixing console
Hide thumbs
Also See for TF5:
- Service manual (372 pages) ,
- Reference manual (84 pages) ,
- User manual (75 pages)
Table of Contents
Features
Adjusts 1-knob or threshold for the selected channel's COMP.
COMP 1-knob/Thr
When 1-knob COMP is turned on, adjusts 1-knob; when 1-knob COMP
is turned off, adjusts threshold.
Adjusts 1-knob or gain for the selected channel's EQ.
EQ 1-knob/Gain
When 1-knob EQ is turned on, adjusts 1-knob; when 1-knob EQ is
turned off, adjusts gain.
EQ Frequency
Adjusts EQ frequency for the selected channel.
EQ Q
Adjusts EQ Q for the selected channel.
Selected CH
Adjusts HPF for the selected channel.
HPF
Turn the knob to adjust the frequency.
Adjusts analog gain or digital gain for the selected channel.
When the channel's input is an analog source, adjusts analog gain.
Input Gain
When the channel's input is a digital source (i.e., USB, iPad, or STIN),
adjusts digital gain.
Gate Threshold
Adjusts gate threshold for the selected channel.
Pan/BAL
Adjusts pan or balance for the selected channel.
5
Foot Switch button
Allows you to assign features to the footswitch.
6
Foot Switch setup button
Displays the features that can be assigned to the footswitch.
Description
Foot Switch setup button
Features that can be assigned to the footswitch
FUNCTION
PARAMETER1
No Assign
Brightness
Bank Change
CH ON
Specific CH
Inc
Dec
CH Select
Specific CH
Clear Cue
CUE
Specific CH
Effect
Bypass
Help
Meter
Peak Hold ON
Output
Monitor
Source Select
Input
Mute Master
FX
Oscillator On
Oscillator
Specific CH
Bookmark
Page Change
Bookmark with
"SEL"
Close Popup
- 29 -
Description
PARAMETER2
No feature is assigned
Switches the brightness setting bank. This
feature is supported from V1.1.
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
Turns the channel assigned to PARAMETER 2
DCA 1–8,
on and off.
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
Select channels in order of the direction
selected for PARAMETER 1.
CH 1–40,
ST IN 1L–ST IN 2R,
FX1L–FX2R,
Selects the channel assigned to
AUX 1–8,
PARAMETER 2.
AUX 9–20,
STEREO L, STEREO R,
SUB
Clears all cue selections.
Same as the CLEAR CUE key on the top panel.
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
Turns the cue on and off for the channel
DCA 1–8,
assigned to PARAMETER 2.
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
FX 1, FX 2,
Bypasses the effect assigned to
INS FX 1–6
PARAMETER 2.
Displays help information.
Turns the peak hold on and off.
Turns the monitor out on and off.
STEREO, SUB,
ST IN 1, ST IN 2,
Selects the monitor source assigned to
USB 33/34,
PARAMETER 2.
Playback
Same as the corresponding MUTE key on the
top panel.
Turns the oscillator on and off.
AUX 1–20,
Turns the oscillator sent to the channel
STEREO L, STEREO R,
assigned to PARAMETER 2 on and off.
SUB
Press and hold for more than 2 seconds to
bookmark the current screen. Press and hold
for less than two seconds to display the
bookmarked screen.
The selected channel is saved with the
bookmark. Same as above.
Closes the popup screen.
TF Series
Toolbar
Reference Manual
- Quick Links:
- Setting the Input
- SAVE/LOAD Screen
- DCA Roll out
Hide quick links:
Table of Contents
