Installation - Electrolux EWC 1050 User Manual

18 electrolux

The consumption data shown on this chart is to be considered purely indicative, as it

may vary depending on the quantity and type of laundry, on the inlet water temperature

and on the ambient temperature.

Lifting the machine

Be careful when lifting the machine. Incorrect

methods of lifting can cause physical injuries

and also increase the risk of damage to the

machine. Open the door and take hold of the

top inside of the door opening. You can also

lift the machine by gripping the rear overhang

of the top.

Warning! Never lift the machine by

gripping it's control panel, door, or

detergent dispenser.

Unpacking

When supplied the washing machine is

packed using a number of locking devices/

packing pieces to prevent drum and motor

from damage in transit All transit bolts and

packing must be removed before using the

appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever

has to be transported again.

1. Spread some of the polystyrene packag-

ing materials on the floor behind the ma-

chine and then lay the machine carefully

rear side down on them. Make sure that

no hoses are crushed in the process. Re-

move the polystyrene base and the sup-

port bar which the machine rests on.

2. Return machine to it's upright position

and remove the power supply cable and

the draining and inlet hose from the hose

holders on the rear of the appliance.