Miele PW 6065 Plus Operating Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Washer
  5. PW 6065 Plus
  6. Operating manual

Miele PW 6065 Plus Operating Manual

Miele operating manual washer pw 6065 plus
Hide thumbs Also See for PW 6065 Plus:
Table of Contents

Quick Links

See also: Operating and Installation Instruction
Operating manual
Washer
PW 6065 Plus
V
To prevent accidents
and machine damage
read these instructions
Installation or use.
M.-Nr. 06 523 700
Table of Contents
loading

Related Manuals for Miele PW 6065 Plus

Summary of Contents for Miele PW 6065 Plus

  • Page 1 Operating manual Washer PW 6065 Plus To prevent accidents and machine damage read these instructions installation or use. M.-Nr. 06 523 700...
  • Page 2 General problems with the washer ........
  • Page 3 Leveling the washer ........
  • Page 4 Incorrectly repaired machines may pose a considerable risk to the user which is not covered by the manufacturer. Repairs should only be performed by a Miele approved technician. Ensure power is not supplied to the appliance while maintenance or repair work is being performed. The...
  • Page 5 Only when these parts are fitted can the safety standards of the machine be guaranteed. If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. This appliance is not designed for...
  • Page 6 If the washer needs to be descaled, use a descaling agent with corrosion protection. These special descaling agents can be purchased from the Miele Service department. Use as directed. Never use solvent based cleaning agents in this machine, this may result in damage and create toxic fumes.
  • Page 7 Allows a service technician to check and update the wash programs to select menus to confirm the selection button to open the drum door. The washer is suitable for use in laundromats or community laundromats for large amounts of laundry.
  • Page 8 2 Wrinkle-free 3 Delicates 4 Woollens H The display shows the main menu (with factory default settings). "Program selection" is highlighted. If the display is dark (in Stand-by mode) turn the jog shuttle. The first four programs shown in the display on the left are the "Favorites".
  • Page 9 To go back to the main menu, press G "back". All components can also be selected and confirmed with the jog shuttle only. The "Settings" menu allows you to adjust the washer to individual needs. See "Settings" for more information. backA Cottons Hygiene Cottons Uni.
  • Page 10 ^ Open the water mains. The Welcome screen shows when the washer is turned on for the first time. PROFESSIONAL Welcome! The welcome screen will not show anymore, when the total wash time of the washer exceeds one hour.
  • Page 11 ^ Empty all pockets. Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.) can cause damage to clothes and the machine. ^ Pre-treat stains. Tough stains (blood, egg, coffee, tea etc.) or badly soiled areas (collars and cuffs) should be penetrated with a stain remover or a paste made from powder detergent and warm water.
  • Page 12 This will improve washing effectiveness and help distribute the load evenly. For the lowest energy and water consumption load the washer to its max. capacity. See "Program guide". Note: Overloading the washer will affect wash results and cause wrinkling.
  • Page 13 Use detergent according to the laundry soiling and water hardness. – ineffective cleaning of laundry; fabrics may become gray and stiff over time. – grease stains on the laundry. – hard water deposits on the heating element. – oversudsing with minimal drum movement;...
  • Page 14 The wash water will be drained away. The anti-crease program starts when the laundry is not immediately removed from the washer after the program end. "Anti-crease" and "End" will flash alternately in the display. ^ Use the a "Door" button to open the drum door.
  • Page 15 The washer has the option to save the most used wash programs on the direct select buttons. The option "Save" must be selected in the "Settings - Supervisor level". Contact Technical Service for access to this level. Cottons Uni. 60°C 2 Minimum iron 40°C...
  • Page 16 Cottons Uni. Temperature cold - 60°C ^ Select the desired temperature with the jog shuttle and confirm. The basic menu shows again. Cottons Uni. Spin speed 0 - 1400 rpm ^ Select the desired spin speed with the jog shuttle and confirm.
  • Page 17 The basic menu shows all selected components. Cottons Uni. Pre-wash Duration 00:53:00 h Extras Delay Start Y ^ Press the direct select button F. Cottons Uni. Pre-wash until now Cottons Uni. Saving to ^ Select the desired number for the favorite with the jog shuttle and confirm.
  • Page 18 The basic wash programs can be enhanced with "Extras". Cottons Uni. Duration 0:45 h ^ Press the direct select button D. The sub-menu "Extras" shows. Cottons Uni. Options ^ Select the desired Extras with the jog shuttle and confirm. – Repeat if another Extra is desired. –...
  • Page 19 The washer stops after the last rinse, the laundry remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program. For laundry with normal to heavy soiling or stains.
  • Page 20 The delay start option allows you to select the program end time. The program start can be delayed between 30 minutes and 24 hours. Cottons Uni. Duration 0:45 h ^ Press the direct select button E. The "Delay Start" menu shows.
  • Page 21 1400 – Selecting the final spin 1200 The washer is set default to the maximum spin speed of the wash 1400 program. You can select a lower spin speed. Press "Start" to start the final spin.
  • Page 22 Items Items made from cottons and linen, i.e. bed linen, baby clothing, underwear Detergent Universal detergent Load size 6.5 kg Items Items made from cottons or mixed fabrics, i.e. T-Shirts, pants Wash dark colored fabrics with detergent for colors or a liquid detergent.
  • Page 23 Items Items made from machine washable wool and wool blend fabrics. Detergent Detergent for wool Load size 2.5 kg Items Hand washable items, that contain no wool. Wash hosiery and lingerie in a lingerie bag. Detergent Detergent for delicates Load size 2.5 kg Items Shirts and dress shirts.
  • Page 24 The following programs can be added from the "Settings - Supervisor level" when activated by Technical Service. Items Kitchen linen made from cottons and linen, i.e. chef jackets and pants, towels, rags Use the "Pre-wash" program for tough stains. Use a pre-wash detergent with enzymes.
  • Page 25 Items Outdoor clothing made from micro fibers. – Close all zippers. – Do not use fabric softener Detergent Detergent for delicates Load size 3.5 kg Items To treat micro fiber, ski clothing, fine dense cotton (popelin) or table cloths to make them water repellent and soil resistant. –...
  • Page 26 Items Bed linen made of cottons or mixed fabrics. Note For different requirements with a temperature selection of 85°C (thermal) to 40°C (chemothermal) with the respective holding times. Detergent Use a detergent for disinfection and chemothermal disinfection. Regard the temperature level recommended on the packaging. Load size 6.5 kg If a temperature lower than 55°C was selected for the last wash program or if the...
  • Page 27 Water level Cottons Hygiene Cottons Uni. Minimum iron Delicates Sturdy Woollens Silk Dress Shirts Denim Disinfection* Kitchen linen* Table linen* Curtains Pillows Outerwear* Proofing* Towelling Sluice Spin d = low water level ( = middle water level e = high water level For program sequence explanations, see the following page.
  • Page 28 The washer is equipped with a electronic control which determines the load size automatically. The washer determines the required water consumption for each load and depending on quantity and water absorbency of the laundry. Different program sequences and wash times will result.
  • Page 29 Once the program has started the washer cannot make adjustments of the load size. After adding or removing laundry, the washer will default to the water and electrical consumption of a full load. The time remaining will automatically be adjusted.
  • Page 30 Only use laundry detergent formulated for front loading washing machines. For wool and wool blend fabrics use a detergent formulated for wools. Follow instructions on the detergent packaging for the correct use and amount of detergent. No soiling or stains are visible. Some visible soiling or a few light stains.
  • Page 31 "Start" button. ^ When dying fabrics in the washer, adhere to the manufacturer’s instructions. The washer is set up for connection to an external detergent dosage system. A conversion kit is necessary which can be purchased from Miele.
  • Page 32 These can damage plastic surfaces and other parts. ^ Clean the exterior of the washer with a mild solution of non-abrasive detergent or soap and water. Wipe dry with a soft cloth. ^ Clean the drum with a stainless steel cleaner specially formulated for use in a washing machine.
  • Page 33 The washer has two water inlet filters to protect each inlet valve. Check and clean these filters every 6 months. This may have to be done more frequently with some water supplies. ^ Turn off the water faucet. ^ Unscrew the inlet hose from the valve...
  • Page 34 The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine: The washer has no Possible fault power. – the washer is connected to – the circuit breaker has not The instructions in Follow the instructions as "Before using for the described in the "Before using...
  • Page 35 § A different language was selected under "Settings-Language J". Level the machine (see "Installation Instructions-Leveling the washer"). – Check and clean the filters in the water inlet hoses. – Select the "Water plus" Extra if desired. Clean the detergent drawer. In the future add...
  • Page 36 – Run a 140°F program with liquid detergent to clean the washer before using it for laundry again. – After drying, remove white residues with a clothes brush. – In the future, use liquid...
  • Page 37 As a safeguard against scalding, the drum door cannot be opened if the wash water temperature is over 55°C. Insert the plug into the outlet and the circuit breaker. To open the drum door, see "Frequently asked questions - Opening the drum door during a power failure...".
  • Page 38 Disconnect the machine from the power supply. ^ Open the detergent dispenser drawer. ^ Remove the tool. ^ Open the lint trap door. If the main drain hose is clogged, water will be retained in the machine Caution: If laundry has been washed at a high temperature, the water draining out of the machine will still be hot! Stop and allow it to...
  • Page 39 Once the flow of water stops: ^ Remove the lint trap lid. ^ Remove any foreign objects or lint from the filter. ^ Check that the impeller (in the back of the chamber) rotates freely by spinning it with your hand. ^ Return the lint trap lid and tighten into place.
  • Page 40 ^ Press the lever for the emergency drain down and hold until you hear no more water running out. Always make sure the drum is stationary before reaching into the drum to remove laundry. A moving drum is extremely dangerous. ^ Insert a screwdriver into the notch, next to the lever, pull it down.
  • Page 41 . ^ Replace the bad light bulb with a new one. A replacement bulb can be obtained by contacting Miele. The light bulb must not exceed the maximum wattage listed on the data plate. ^ Insert the light bulb into the plastic fitting.
  • Page 42 In the event of a fault which you cannot fix yourself, please contact the Miele Technical Service Department. 1 800 565-6435 [email protected] When contacting the Technical Service Department, please quote the model and serial number of your appliance. Both can be found on the data plate visible above the front glass on the inside of the door.
  • Page 43 Installation Instructions...
  • Page 44 a Water intake hose cold b Water intake hose hot c Electrical connection d Control panel e Detergent dispenser drawer f Drum door g Access panel to drain filter, drain pump and emergency door release h Height adjustable feet i Stand j Retaining clips (for concrete stand) k Recessed grip...
  • Page 45 a Lid with transport grips b Mounting for: – Water intake hose – Drain hose – Withdrawn shipping struts c Power cord d Shipping struts with rotary protectors e Water intake hose (cold) f Water intake hose (hot) g Drain hose for drain pump h Drain hose for drain valve i Height adjustable feet...
  • Page 46 Miele Service Technician. Empty the coin mechanism regularly. Coins or tokens may get jammed. Do not install devices to auto- matically turn the washer off, i.e. a clock timer. * Available from your Miele dealer or Miele.
  • Page 47 It is best to install the washer in the corner of a room, where the stability of the floor is at its greatest.
  • Page 48 ^ Turn the left shipping strut counterclockwise 90° with the enclosed combination wrench. ^ Pull the shipping strut out. ^ Turn the right shipping strut counterclockwise 90° with the enclosed combination wrench. ^ Pull out the shipping strut out.
  • Page 49 ^ Close the holes with the rotary protectors and their caps. ^ Fasten the shipping struts at the rear side of the washer. Take care to insert the drill holes, b, into the clamps, a. Movement of the washer without the shipping struts in place should be kept to a minimum.
  • Page 50 "banging" during the spin cycle or "walking" across the floor during use. The washer is leveled by adjusting the four feet. The machine is boxed with the feet completely screwed in. ^ Turn the locking ring, , counter- clockwise with the enclosed combination wrench.
  • Page 51 The water intake hoses are equipped with screen filters. Do not remove these filters except for cleaning. Replace the water hoses only with genuine Miele hoses. Extension hoses (8’ 2" or 13’ [2.5 m or 4 m]) may be obtained from Miele.
  • Page 52 The connection of the machine to a hot water line only, is not possible for functional reasons. If the washer is not to be installed for hot water connection, the settings "Main wash", "Pre-wash" and "Rinse" must be adjusted respectively. The hot water intake hose must be removed.
  • Page 53 If necessary the drain hose can be extended up to 16' 5" (5 m). The hose extension can be purchased from your Miele dealer or Miele. The drain pump must be replaced for drain heights over 3 ft (1 m). The maximum allowable drain height is 5 ft 11 in (1.8 m).
  • Page 54 The conversion must be performed by a Miele Service Technician. Additionally the "Heating level" setting must be adjusted. Do not install devices to automatically turn the washer off,...
  • Page 55 Height Width Depth Depth with the door open Weight Maximum floor load Capacity Fuse rating Rated load Fuse rating Noise level during spinning (Noise emission 3. GSGV) Minimum water flow pressure Maximum water pressure Length of intake hose Length of power cord Drain height maximum (Drain pump) Light bulb for drum light 85 cm...
  • Page 56 The cardboard box and packing materials protect the appliance during shipping. To prevent suffocation of children ensure that any plastic wrapping, bags, etc. are disposed of safely and kept out of the reach of children. Please recycle. Old appliances may contain materials that can be recycled.
  • Page 57 Menu Settings J to adjust standard settings The washer electronic can be adjusted to changing demands with the settings. The settings can be changed at any time.
  • Page 58 2 Minimum iron 3 Delicates 4 Woollens H ^ Select the "Settings" J in the main menu and confirm by pressing the jog shuttle. Settings ^ Select the settings to be changed and confirm. If no selection was made in the sub-menu, the display will switch back to the "Settings"...
  • Page 59 The display contents can be shown in different languages. The displayed language can be set in the sub-menu "Language" J. ^ Select the desired language and confirm with "OK". The flag behind the word "Language" is a guide to find the settings menu in case a foreign language is shown.
  • Page 60 The selection allows the clock to be shown as 24 hours, 12 hours or not at all. The time of day is also set here. If the clock is not selected the delay start can only be shown only as a 24 hour clock timer.
  • Page 61 Once the wash program is selected again the washer shows the saved options. The memory function is not active when favorites are selected with the direct select buttons.
  • Page 62 The menu "Settings" (except Languages J) is locked with a code to prevent unwanted access. Settings ^ Select "Supervisor level" and confirm. Settings Supervisor level ^ Select "Access via code" and confirm. Enter the code " wrong three times, the code entry will be locked for 1 hour. ^ Turn the jog shuttle until the first digit shows.
  • Page 63 Confirming the code ^ Confirm the entered code. Entry OK Menu opened The user is now in the "Supervisor level". The previously described and all the following settings can be changed. Change the code to prevent unauthorized access to the settings.
  • Page 64 The display contents can be shown in different languages. The fixed default language can be set in the sub-menu "Languages J". ^ Select the desired language and confirm with "OK". The language order can be set, when the option "Language access - international"...
  • Page 65 30°C or higher. The machine comes factory set with the water type "hot". If the washer is not connected to hot water, the program running times will be extended and vary from the displayed remaining times.
  • Page 66 The program "Cottons Hygiene" and "Cottons Uni." allows you to increase the water level for the main wash. The machine comes factory set with the option block parameter selected. (The water level will be controlled according to the factory set program data.) The program "Minimum iron"...
  • Page 67 Additional programs can be added to the program selection. 0 Additional programs (factory default) 4 Additional programs ("Table linen", "Pillows", "Curtains" and "Kitchen linen") 2 Additional programs ("Outerwear" and "Waterproofing") 6 Additional programs (all of the above). If the last used program had a temperature of 55°C or less, the display shows the request to start the "Hygiene"...
  • Page 68 The energy use for the programs "Cottons Hygiene", "Cottons Uni." and "Minimum iron" is at its optimum when this option is turned on. The machine comes factory set with this option "on". The programs "Cottons Hygiene" and "Cottons Uni." allow you to change the number of rinse cycles.
  • Page 69 You have the option to show the Extra "No Soap" in the menu "Extras". The machine comes factory set with this option "off". The washer is set up for connection to an external dispensing system. To use the external dispensing system the setting must be adjusted/set accordingly.
  • Page 72 Alteration rights reserved / xx05 M.-Nr. 06 523 700 / 00 en - CDN...

Table of Contents