Overheating Protection - Miele CERAMIC COOKTOP WITH INDUCTION KM 5753 Operating And Installation Instructions
Ceramic cooktop with induction
Hide thumbs
Also See for CERAMIC COOKTOP WITH INDUCTION KM 5753:
- Product dimensions (1 page) ,
- Operating and installation instruction (72 pages) ,
- Operating and installation instructions (56 pages)
Table of Contents
Safety features
Overheating protection
The induction coils and the cooling
element of the electronic are fitted with
a overheating protection feature. This
prevents the induction coils and cooling
element from overheating.
This mechanism works on the affected
burner or on the entire cooktop in the
following ways:
– If the booster function is being used,
this will be switched off.
– The power level will be reduced.
– If an induction coil is affected, the
cooktop will switch off. The fault
code FE99 will be displayed.
The burner can be used again as soon
as it has cooled to a safe temperature.
– If the cooling element is affected, the
power supply to the burners will be
reduced, and the set power level will
continue to be displayed.
As soon as the cooling element has
cooled sufficiently, the burners will
automatically continue to operate at the
original power setting.
30
Overheating can be caused by:
– heating an empty pan.
– fats or oils being heated on the
highest power setting.
– there being insufficient ventilation to
the under side of the appliance.
If the overheating protection
mechanism triggers again, contact
Miele Technical Service.
Hide quick links:
Table of Contents
