Rear Cover; Side Panel - GE C2S985 Technical Service Manual

Gas ranges

Hide thumbs Also See for C2S985:

Table of Contents

Rear Cover

To access the rear cover, it is necessary to remove

the range from its installation. The rear cover is

attached using twenty-four 1/4-in. hex-head screws

(2 not shown).

To access the side panel, it is necessary to remove

the range from its installation. The side panel must

be removed to access the upper and lower oven

TCOs, gas lockout valve, latch assembly, and upper

oven lockout relay.

To remove the side panel:

1. On Café models, remove the control panel. (See

Touch Panel and Electronic Range Control (ERC)

2. On Proﬁ le and GE models, remove the manifold

panel. (See

Manifold Panel

3. Remove the rear cover. (See

4. Remove the remaining 1/4-inch hex-head

screws holding the rear of the side panel to the

frame.

– 47 –

Rear Cover

(Continued next page)

Table of Contents