Installation - Emerson Network Poewr MPH2 User Manual

Rack pdu
Hide thumbs Also See for Network Poewr MPH2:
Table of Contents
2.0
I
NSTALLATION
An MPH2 rack PDU can be installed in an Emerson rack on the frame members using field-supplied
hardware. The unit can be installed on the face or the side of frame members. The unit can be
mounted so that the power cord exits either the top or bottom of the rack.
NOTE
Follow all local and national electrical codes, standards and recommended practices.
Disconnect Required for Hard-Wired MPH2 Units
A readily accessible input power disconnect device must be installed near the MPH2 rack PDU.
Input Power Location for MPH2 Units with Factory-Installed Power Cords
The input power socket or outlet must be installed near the MPH2 and must be easily accessible.
9

Installation

®
Emerson
MPH2
Table of Contents
loading

Table of Contents