Panasonic AK-HRP200G Operating Instructions Manual
Operations and settings remote operation panel
Hide thumbs
Also See for AK-HRP200G:
- Operating instructions manual (44 pages) ,
- Operating instructions manual (20 pages) ,
- Operating instructions manual (20 pages)
Table of Contents
Quick Links
See also:
Operating Instructions Manual
z How the operating instructions are organized
• Basics:
This manual describes how to connect the unit to the required equipment and set it up.
Before installing the unit, be sure to read the manual to ensure that you know how to install
it correctly.
• Operations and Settings (this manual)
Operations and Settings describe how to operate and set up the unit.
Before operating this product, please read the instructions carefully and save this manual for future use.
M1012KT0 -PS
Operating Instructions
Remote Operation Panel
AK-HRP200G
Model No.
ENGLISH
VQT4S52A (E)
Table of Contents
Related Manuals for Panasonic AK-HRP200G
Summary of Contents for Panasonic AK-HRP200G
-
Page 1: Operating Instructions
Operating InstructionsRemote Operation Panel AK-HRP200G Model No. z How the operating instructions are organized • Basics: This manual describes how to connect the unit to the required equipment and set it up. Before installing the unit, be sure to read the manual to ensure that you know how to install it correctly. -
Page 2: Table Of Contents
About.trademarks.and.registered.trademarks. • SDHC logo is a trademark of SD-3C, LLC. • Other company names and product names appearing in this manual are the registered trademarks or trademarks of their respective companies. Copyrights It is prohibited to transfer, copy, disassemble, decompile, and reverse engineer the software included with the unit, as well as export it in violation of the export laws. -
Page 3: Introduction
For details, consult your supplier. Disclaimer.of.warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Setup.mode
Setup.mode Setup.mode Setup mode allows the user to make a variety of unit settings, and save and load scene files and user files. Normal operation is unavailable during setup mode operation. ROP menu (REMOTE OPERATION MENU) operation is not available either. ... -
Page 5
Setup.mode. (continued) Opening.setup.mode Exiting.setup.mode Setup mode differs from normal operating modes. Use the steps below To exit setup mode, hold down
for two seconds. The unit returns to open setup mode. to normal operating mode. SYNC CAMERA When.a.camera.and.CCU.are.connected,.select.IRIS.(to. - Page 6 Setup.mode. (continued) Setup.mode.menu.configuration Setup mode is comprised of the menus and submenus listed in the table below. Default. Menu Submenu Set.value/Selected.operation value SYNC CAMERA SYNC CAMERA SYNC CAMERA M.GAIN M.PED 10-19 M.GAIN M.PED 10-19 M.GAIN M.PED 10-19 DATA DATA DATA IRIS...
-
Page 7: Setup.mode.operations
Setup.Mode.OperationsPress. .or. .to.select.a.file.number.on.the. Menu numbers 10 to 15 are for future use. memory.card.and.press. .to.confirm.the. selection. 1..Set.camera.number SYNC M.GAIN M.PED Open.setup.mode.and.check.that.menu.number.[1].is. displayed..If.a.menu.number.other.than.[1].appears,. press. -
Page 8: Saving User Files To/Loading User Files From Memory Card
Setup.Mode.Operations. (continued) • To cancel loading, select [n] and press. • [E01] is displayed when a user file with the same name as the one • The file is loaded from the memory card and [Fin] appears when you are attempting to save already exists on the memory card. loading ends. -
Page 9: Save Lens File To/Load Lens File From Memory Card
Setup.Mode.Operations. (continued) 4-2.Load.lens.file.from.memory.card 4.Save.lens.file.to/load.lens.file.from.memory.card Press..to.select.[CC]. Press. -
Page 10: Format Memory Card
Setup.Mode.Operations. (continued) 5-1.Save.ROP.configuration.file.to.memory.card 6.Format.memory.card Press..to.select.[ND]. Press. -
Page 11: Set Buzzer (Beep/Call Tone)
Setup.Mode.Operations. (continued) 7-2.Set.pedestal 9-1.Set.LED.brightness Press..or. .to.select.[PE].and.press. Press. .to.select.[ND].and.press. .to.confirm.the.selection. .to.confirm.the.selection. • Each press of toggles between [ND] (LED display SYNC brightness) and [CC] (7-segment display brightness). M.GAIN M.PED SYNC M.GAIN M.PED IRIS • To exit setup mode, hold down for about 2 seconds. IRIS •... -
Page 12: Confirm Version
Setup.Mode.Operations. (continued) Press..or. .to.select.[y].and.press. • [E02] is displayed if the save operation to the memory card fails. (→page 13) .to.confirm.the.selection. If this happens, check the memory card and try again or insert • After confirmation, unit settings are initialized and it is automatically another memory card to perform the operation again. -
Page 13: Error Messages In Setup Mode
Setup.Mode.Operations. (continued) Error.messages.in.setup.mode Error.No. Error.data A file with the same name already exists. Select [y] to overwrite. An error occurred on the memory card. • Check if a file with the same name already exists. • Check if the memory card is write protected. •... -
Page 14: Rop.menu.operations
ROP.menu.operations ROP.menus.that.can.be.operated.on.the.unit Operating.ROP.menus The unit can access the picture monitor on a CCU to control the ROP Basic.menu.operations menu (REMOTE OPERATION MENU). Hold.down..for.2.seconds. Opening.menus.and.menu.configuration The [REMOTE OPERATION MENU] appears. (The cursor appears at the beginning of the first line.) Hold down ... - Page 15 ROP.menu.operations. (continued) Operating.other.menus When a menu has more than one setting on a line, press
-
Page 16: Rop.menu.setting
ROP.menu.setting The following describes [ROP MENU] settings. PEDESTAL/FLARE/GAIN SHADING(WHITE) →＊＊ ＰＥＤＥＳＴＡＬ／ＦＬＡＲＥ／ＧＡＩＮ ＊＊ ＦＬＡＲＥ ＳＷＩＴＣＨ ＯＮ → ＊＊ ＳＨＡＤＩＮＧ （ ＷＨＩＴＥ ） ＊＊ Ｒ Ｇ Ｂ ＷＨＩＴＥ ＳＨＡＤＩＮＧ ＳＷＩＴＣＨ ＯＮ ＰＥＤＥＳＴＡＬ ０ ０ ０ ＨＳＡＷ ＨＰＲＡ ＶＳＡＷ ＶＰＡＲＡ ＦＬＡＲＥ ０ ０ ０ Ｒ ０ ０ ０ ０ ＧＡＩＮ ０ ０ Ｇ ０ ０ ０ ０ Ｂ ０ ０ ０ ０... -
Page 17: Gamma/Black.gamma
ROP.menu.setting. (continued) GAMMA/BLACK.GAMMA Item Display Function DRS.SWITCH Turn on for automatic contrast adjustment. → ＊＊ ＧＡＭＭＡ／ＢＬＡＣＫ ＧＡＭＭＡ ＊＊ This adaptive-type gamma correction adjusts the gamma ＧＡＭＭＡ ＳＷＩＴＣＨ ＯＮ Ｒ Ｍ Ｂ correction to the optimal setting. ＧＡＭＭＡ ０ ０． ４５０ ０ EFFECT.DEPTH Turn on for contrast adjustment. ׀... -
Page 18: Knee/White Clip
ROP.menu.setting. (continued) KNEE/WHITE.CLIP MATRIX.(1/2)→＊＊ ＭＡＴＲＩＸ （ １／２ ） ＊＊ • Some settings in this menu are not available when the [CINEMA GAMMA SWITCH] is set to [ON]. ＰＲＥＳＥＴ ＮＯＲＭＡＬ ＭＡＴＲＩＸ ＳＷＩＴＣＨ ＯＦＦ →＊＊ ＫＮＥＥ／ＷＨＩＴＥ ＣＬＩＰ ＊＊ ＭＥＭＯＲＹ Ａ ＫＮＥＥ ＳＷＩＴＣＨ ＯＮ Ｒ－Ｇ ０ Ｒ Ｍ... -
Page 19: Matrix (2/2)
ROP.menu.setting. (continued) MATRIX.(2/2) HD.DTL/SKIN.DTL.(1/2) →＊＊ ＭＡＴＲＩＸ （ ２／２ ） ＊＊ →＊＊ ＨＤ ＤＴＬ／ＳＫＩＮ ＤＴＬ （ １／２ ） ＊＊ １２ＡＸＩＳ ＭＥＭＯＲＹ Ａ ＤＥＴＡＩＬ ＳＷＩＴＣＨ ＯＮ ＳＡＴ ＰＨＡＳＥ ＳＡＴ ＰＨＡＳＥ Ｖ ＤＥＴＡＩＬ ２０ Ｇ ＿ Ｃｙ Ｇ ０ ０ ０ ０ Ｈ ＤＥＴＡＩＬ ２０ Ｃｙ ＿ Ｂ Ｃｙ ０ ０... -
Page 20: Hd Dtl/Skin Dtl (2/2)
ROP.menu.setting. (continued) Item Display Function Item Display Function +GAIN Changes the detail gain level in MEM.A.WIDTH Expands the width of skin tone ׀ ׀ + (up) direction areas in memory bank A in a range from 0 to 255. ׀ MEM.A.SATU Changes the saturation of skin ׀... -
Page 21: System (1/2)
ROP.menu.setting. (continued) Item Display Function Item Display Function LEVEL. Lowers the detail in dark areas. HD.COLOR.BAR FULL Select the color bar signals to be DEPENDENT ׀ BARS-1 It adjusts the level. output from the HD/SD SDI OUT ARIB connectors and VBS connector ׀... -
Page 22: System (2/2)
ROP.menu.setting. (continued) SYSTEM.(2/2) Item Display Function MIC1.AMP -20dB Makes fine adjustments of the ׀ MIC1 gain. →＊＊ ＳＹＳＴＥＭ （ ２／２ ） ＊＊ ׀ (in.1.dB.increments) ＨＤ Ｈ ＰＨＡＳＥ ０ 20dB ＳＤ Ｈ ＰＨＡＳＥ ０ MIC2.GAIN 20dB Makes coarse adjustments of ＳＤ－ＨＤ Ｖ ０Ｈ 40dB MIC2 gain. 60dB MIC2.AMP -20dB Makes fine adjustments of MIC2... -
Page 23: Lens File/Edit (1/2)
ROP.menu.setting. (continued) LENS.FILE/EDIT.(2/2) Item Display Function ASU.FILTER Sets the operation of the ND CURRENT filter when auto setup is started. →＊＊ ＬＥＮＳ ＦＩＬＥ／ＥＤＩＴ （ ２／２ ） ＊＊ REF: ＥＸＴＥＮＤＥＲ Ｘ１．０ ＦＩＬＥ The filter stored in the Ｒ Ｇ Ｂ reference file is used when ＦＬＡＲＥ... -
Page 24: Data.handled.in.the.studio.camera.system
It can be saved and read by operation on the ROP. It can also be saved and read to/from the memory card on the ROP. For a list of data, refer to the Operating Instructions for AK-HRP200G. Scene.file.(SCENE) 1 to 4 This data for creating pictures is handled mainly by video engineers (VE) and is managed by the camera. -
Page 25: Data.item.list
Data.item.list Camera.(menu.list) z OPERATION Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 MARKER SIDE MODULE LEVEL 0 to 15 ZONE MARK OFF, 4:3, 13:9, 14:9, 15:9, 16:9 SAFETY AREA MODE TYPE1, TYPE2 TYPE1 ... - Page 26 Data.item.list. (continued) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 RETURN SETTING RETURN MODE NORM, TOGGLE, SEQ. NORM RETURN SELECT RETURN A 1, 2, 3, 4 RETURN B 1, 2, 3, 4 ID SETTING RETURN 1 "RET1 "(5 characters) RET1...
- Page 27 Data.item.list. (continued) z MAINTENANCE Protected.settings Menu Item Adjustment.range Default.value. SCENE USER LENS 1.to.4 1.to.3 1.to.32 SD CARD R/W READ SELECT 1 to 8 READ YES, NO WRITE SELECT 1 to 8 WRITE YES, NO CARD CONFIG YES, NO CAC ADJUST CAC CONTROL ON, OFF CAC FILE DELETE...
- Page 28 Data.item.list. (continued) CCU.(menu.list) Protected.settings Menu Submenu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 OPERATION SETTING1 CCU MODE 1080/59.94i 59.94Hz 1080/50i 1080/59.94i 50Hz 1080/50i SDI RETURN1 SDI RETURN2 SDI OUTPUT1&2 SDI OUTPUT3&4 SDI OUTPUT3&4 NORMAL NORMAL/PM COMPOSITE NORMAL/ NORMAL SETTING2 FS DELAY...
- Page 29 Data.item.list. (continued) Protected.settings Menu Submenu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 OPERATION INCOM/MIC 4W/RTS IN Level -40.0 to 20.0 dB 0 dB (in 0.5 dB increments) 4W/RTS OUT Level -40.0 to 20.0 dB 0 dB (in 0.5 dB increments) RTS Cancel -40.0 to 31.5 dB 0 dB...
- Page 30 Data.item.list. (continued) Protected.settings Menu Submenu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 MAINTENANCE PM VIEW SETTING CAMERA No. CAM MOD SCENE FILE No. SHUTTER ND FILTER GAIN EXTENDER INFO IRIS IRIS LEVEL PM OPERATION STATUS DISPLAY TIME STATUS MASTER GAIN SHUTTER LENZE EXTENDER...
- Page 31 Data.item.list. (continued) ROP.(menu.list) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 SHADING(WHITE) WHITE SHADING SWITCH OFF/ON H SAW R -100 to 100 H SAW G -100 to 100 H SAW B -100 to 100 ...
- Page 32 Data.item.list. (continued) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 KNEE/WHITE CLIP KNEE SWITCH OFF/ON POINT R -20 to 20 POINT M 80.0% to 110.0% 95.0% POINT B -20 to 20 ...
- Page 33 Data.item.list. (continued) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 HD DTL/SKIN DTL (1/2) DETAIL SWITCH OFF/ON V DETAIL 0 to 63 H DETAIL 0 to 63 CRISP 0 to 63 ...
- Page 34 Data.item.list. (continued) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 SYSTEM (1/2) RETURN1 HD SDI1/HD SDI2/VBS HD SDI1 RETURN2 HD SDI1/HD SDI2/VBS HD SDI2 RETURN3 HD SDI1/HD SDI2/VBS HD SDI1 RETURN4 HD SDI1/HD SDI2/VBS HD SDI2 RETURN · DELAY NORMAL/SHORT NORMAL DOWN CONVERT MODE...
- Page 35 Data.item.list. (continued) Protected.settings Menu Item Adjustment.range Default.value SCENE USER LENS 1.to.4 1.to.3 1.to.32 LENS FILE/EDIT (2/2) EXTENDER x1.0/x2.0 x1.0 FILE FLARE R -100 to 100 FLARE G -100 to 100 FLARE B -100 to 100 ...
-
Page 36: Index
Index Camera menu ..................Camera number ..................CCU menu ................... CINEMA-GAMMA ................Error display ..................Format (memory card) ................. FUNCTION ..................GAMMA/BLACK.GAMMA ..............HD DTL/SKIN DTL ................ Initialize ....................KNEE/WHITE CLIP ................LENS FILE/EDIT ................. MATRIX ..................Optional accessory ................PEDESTAL/FLARE/GAIN .............. - Page 37 Memo...
- Page 38 Web Site: http://panasonic.net プロフェッショナルAVビジネスユニット 〒 571-8503 大阪府門真市松葉町 2 番 15 号 (06) 6901－1161 © Panasonic Corporation 2012...