The PC starts the recovery from the first disc, and
prompts you to select Standard Recovery, Full System
Recovery, or quit the recovery program.
7 Press R to start a Standard Recovery, or F to select
the Full System Recovery.
NOTE: If you have manually deleted the recovery
image from your hard disk drive, the Standard
Recovery option cannot be used.
•
If you pressed R, click Next to continue with the
standard recovery.
Or
•
If you pressed F, press Y to confirm that you want
to start the Full System Recovery. When the
Welcome screen appears, click OK to continue.
When the recovery program finishes with the disc,
the drive tray ejects.
8 Remove the disc and, if you received more than one
recovery disc, insert the next disc in the same tray,
close it, and then click OK.
NOTE: If you have a PC with two drive trays,
they may both open. Close them both before clicking
OK.
9 Repeat the previous step for each numbered recovery
disc you received.
10 After the last numbered disc is ejected, remove it,
and click Restart to restart your PC.
NOTE: If the message ”Please Insert Login Advanced
Installation Disc Number 1 and Restart” is displayed
at the end of a Full System Recovery, remove the
recovery disc from the drive tray, and restart the PC.
You do not need to insert the referenced disc.
®
After your PC restarts, a series of Windows
startup
screens appear.
a If your PC supports multiple languages, you are
prompted for a build ID (this ID number is included
with the recovery discs). Type the build ID number
exactly as it appears, and then click OK.
If you are prompted to insert the Supplemental
Recovery disc, continue with step b.
If you are not prompted to insert the Supplemental
Recovery disc, skip to step 11.