water level gauge
Please note: Failure to descale your kettle may invalidate your guarantee.
Problem | Cause | Solution |
Kettle not operating. | No Power. Kettle unplugged. | Check kettle is plugged in. Check kettle is correctly located to the powerbase. |
Kettle not switching off automatically after boiling/Long switch off time. | Kettle overfilled. | Check water level is not above the Max level. |
Lid not fitted. | Check lid is fitted correctly. | |
Water splashing out of spout area. | Filter not fitted in spout area. | Always use the filter and do not overfill above the Max level. |
Kettle switching on and off during use or switching off before water boiled. | Limescale/mineral build up on element affecting operation. | Check that the element is free from scale. Refer to "descaling" section under care and cleaning. |
Kettle stopped working during operation. | Boil dry protection operated due to insufficient water in the kettle. | Switch off and remove from the powerbase. Allow to cool down before refilling. When the kettle has cooled down the switch will reset itself. Check the water level is above the minimum level. |
If none of the above solve the problem see "Service & Customer Care". |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.