Kenwood MG450 (MG47) - Food Mincer Manual

Kenwood MG450 (MG47) - Food Mincer Manual

Also See for MG450:
Kenwood MG450 (MG47) - Food Mincer Manual

Safety

  • Always unplug:

Use the meat grinder to process meat, poultry and fish. Use the inclusive attachments to shape sausages and kebbe.

Before Plugging In

Important (UK) only

  • The wires in the cord are coloured as follows:
    Blue = Neutral
    Brown = Live.
  • The appliance must be protected by a 3A approved (BS1362) fuse.
    warning Note:

Before Using for the First Time

Mincer

Mincer

  1. power unit
  2. attachment outlet
  3. locking screw
  4. on/off switch
  5. screen storage
  6. reverse switch
  7. bracket for excess cord
  8. spanner
  9. ring nut
  10. mincer screens: fine, medium, coarse
  11. cutter
  12. scroll
  13. mincer body
  14. tray
  15. pusher
  16. pusher lid
  17. dish/cover

To Assemble

To Assemble - Part 1

To Assemble - Part 2

  1. Fit the cutter – cutting side outermost . Ensure it's seated properly – otherwise you could damage your mincer.
  2. Fit a mincer screen . Put the notch over the pin.

To Use The Mincer

  1. Release the locking screw by turning anticlockwise , then slide the attachment into the outlet .
  2. Thaw frozen food thoroughly before mincing. Cut meat into 2.5cm (1") -wide strips.
  3. Switch on . Using the pusher, gently push the food through, one piece at a time. Don't push hard – you could damage your mincer.
    • If the machine stalls or jams during use, switch off. Depress the reverse switch for a few seconds to release the clogged food. Unplug and remove any clogged material.

Sausage Filler

  1. base plate*
  2. large nozzle* (for thick sausages)
  3. small nozzle* (for thin sausages)
    * Stored in the pusher

Use pig/hog skin on the large nozzle and sheep/lamb skin on the small nozzle. Or, instead of using skin, roll in breadcrumbs or seasoned flour before cooking.

To Use the Sausage Filler

  1. Release the locking screw by turning anticlockwise , then slide the attachment into the outlet .
  2. Fit the base plate - put the notch over the pin.
  3. Hold the nozzle on the mincer and screw the ring nut on .
  4. Switch on. Using the pusher, push the food through. Don't push hardyou could damage your mincer. Ease the skin off the nozzle as it fills. Don't overfill.

Pork Sausage Recipe

100g (4oz) dry bread
600g (11⁄2lb) pork, lean and fat, cut into strips
1 egg, beaten
5ml (1tsp) mixed herbs
salt and pepper

Kebbe Maker

Kebbe Maker

shaper*
cone*

* Stored in the pusher

Kebbe is a traditional Middle Eastern dish: deep-fried lamb-and-bulgurwheat parcels with a minced meat filling.

To Use the Kebbe Maker

To Use the Kebbe Maker

  1. Release the locking screw by turning anticlockwise , then slide the attachment into the outlet .
  2. Fit the shaper – put the notch over the pin.
  3. Fit the cone .

Stuffed Kebbe Recipe

Outer Casing

500g (1lb 2oz) lamb or fat-free mutton, cut into strips
500g (1lb 2oz) bulgur wheat, washed and drained
1 small onion, finely chopped


Always use the bulgur wheat straight away after draining. If it is allowed to dry out, it may increase the load on the mincer resulting in damage.

Filling

400g (10oz) lamb, cut into strips
15ml (1tbsp) oil
2 medium onions, finely chopped
5-10ml (1-2tsp) ground allspice
15ml (1tbsp) plain flour
salt and pepper

To finish

Care and Cleaning

Power Unit

Mincer Attachment

  1. Loosen the ring nut manually or with the spanner and dismantle. Wash all the parts in hot soapy water, then dry.
    Don't wash any part in the dishwasher. Never use a soda solution.
  2. Wipe the screens with vegetable oil, then wrap in greaseproof paper to prevent discolouring/rusting. There is storage space for 2 screens on the power unit .

Service and Customer Care

UK

If you need help with:

call Kenwood customer care on 023 9239 2333 or visit www.kenwoodworld.com. Have your model number (e.g. MG450 or TYPE MG47) and date code (5 digit code e.g. 13L35) ready. They are on the underside of the power unit.

  • spares and attachments
    call 0844 557 3653.

Other Countries

  • If you experience any problems with the operation of your appliance, before requesting assistance visit www.kenwoodworld.com.
  • If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.

Guarantee

If your mincer goes wrong within one year from the date you bought it, we will repair it (or replace it if necessary) free of charge provided:

  • you supply your receipt to show when you bought it.

This guarantee does not affect your statutory rights.


IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Need Assistance?

Do you have a question about the MG450 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents