Panasonic KX-TGDA50 Digital Cordless Handset Manual

This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:

• KX-TGD510/KX-TGD530/KX-TGD560
  (The corresponding models are subject to change without notice.)

You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit's operating instructions for further details.

Please read this installation manual before using the unit and save it for future reference.
For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.

Accessory information

Supplied accessories

*1 PNLC1077ZB (Black), PNLC1077ZW (White)

*2 The handset cover comes attached to the handset.

*3 PNYNTGDA50BR (Black), PNYNTGDA50WR (White)

Note:

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

Power connection

Installation

Installation and location

Battery

• We recommend using the supplied batteries or additional/replacement batteries for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.

Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

Other information

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Routine care

• Wipe the outer surface of the product with a soft moist cloth.

Notice for product disposal, transfer, or return

Setting up

Connections/Wall mounting

1. Drive the screws () (not supplied) into the wall, if necessary. 27.2 mm (1 ¹/16 inches)
   

Note:

Battery installation/Battery charging

• USE ONLY rechargeable Ni-MH batteries AAA (R03) size ().
• Confirm correct polarities ().

Charge for about 7 hours.

• Confirm "Charging" is displayed ().
• When the batteries are fully charged, "Fully charged" is displayed.

Note:

• If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends () and the charge contacts with a dry cloth and charge again.

Removing the battery

Handset key print

For the following function, the key prints are different for the supplied handset and optional handset.

• KX-TGDA51: For KX-TGD510/KX-TGD530 series users

  	Function	Supplied handset	Optional handset (KX-TGDA51)
  	Flash	[FLASH]	[]*1/[FLASH]
  	Call waiting	[CALL WAIT]	[]*1/[FLASH]

  *1 The remote voice assist feature is only available for KX-TGD560 series.
• KX-TGDA50: For KX-TGD560 series users

  	Function	Supplied handset	Optional handset (KX-TGDA50)
  	Remote voice assist	[]	[FLASH]/[CALL WAIT]

Registering a handset to a base unit

1. Base unit:
   Press and hold [LOCATOR] for about 5 seconds.
   • If all registered handsets start ringing, press [LOCATOR] again to stop, then repeat this step.
2. Handset:
   Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed.

Note:

• If an error tone sounds, or if is displayed, register the handset according to the base unit's operating instructions.

Display language

1. [MENU]
2. []: Select the desired setting. → [SAVE] → [OFF]

For assistance, please visit http://shop.panasonic.com/support