Table of Contents
4. Electronic
or Digital
Telephone/Attendant
Console
Test (Tables
19-3 - 19-4)
4.01
When the ?TRM
Program
has been loaded,
a test sequence
can be performed
at the Attendant
Consoles
and electronic/digital
telephones.
The
test is designed
to checkall functions of the terminals
in a time-efficient
manner.
4.02 To use the TITIM
Program
(refer to Tables
19-3 and 19-4):
l
Perform the Authorization
Procedure
(Level 1,2,
or 3).
Enter: TTRM (in response
to the OK prompt).
l
REQ will be printed
when
the program
has
loaded.
4.03
Proceed to the electronic/digital
telephone
or
console that is to be tested. The test is performed
as follows:
1) Electronic/Digital
Telephone:
l
Press the D
l
Dial p fii
R
button to obtain dial tone.
( aI@
on the dialpad.
l
The system
will respond
by lighting
all
electronic
telephone
LEDs.
l
Operate
the buttons
and observe
the
responses
in the sequence
shown
in
Table 19-3.
PROGRAMMINGPROCEDURES
SECTlON200-255-319
FEBRUARY1992
2) Attendant
Console:
l
Press the LPK button
in order to obtain
dial tone.
l
Dial iclfi
(~~~~)
on the dialpad.
l
The system
will respond
by lighting
all
BLF LEDs.
l
Operate
the buttons
and observe
the
responses
in the sequence
shown
in
Table 19-4.
3) When
all electronic/digital
telephones
and
console(s)
have been tested, exit the program:
Enter: m
m.
19-3
Chapters
Table of Contents
